Gauge pod

Show off your pride and joy here

Moderator: martauto

lowey
E30 Zone Regular
E30 Zone Regular
Posts: 316
Joined: Sat Aug 12, 2006 11:00 pm
Location: Telford, Shropshire.

Post Thu Jul 15, 2010 4:12 pm

My 2-gauge pod in leather arrived from Parker Performance today. Seems to be a nice bit of kit.

I've added a volt meter and oil pressure - these will be useful, aswell as keeping the power outlet too.

I've prepped some of the wiring (inline) I'm just waiting delivery on a bloody deep 24mm socket so I can get at the oil pressure switch. T bar and sender and a new switch already here. Anybody got any tips re the oil pressure switch...looks to be a bit awkward to get at?

I've also managed to get hold of some very nice grab handles in black double-stitched leather from Ebay Deutchland - when the gauges are in I'll post some pics of those too.

Suggestions/ideas before I get the spanners out most welcome!! :D

Image

Image
1989 325i SPORT Brilliantrot
town325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 7050
Joined: Thu Jun 26, 2008 11:00 pm
Location: cannock staffordshire

Post Thu Jul 15, 2010 4:15 pm

For the oil pressure switch i normally use a cranked spanner as my deep impact sockets are to thick to fit around the switch as its so close to the block
Image
lowey
E30 Zone Regular
E30 Zone Regular
Posts: 316
Joined: Sat Aug 12, 2006 11:00 pm
Location: Telford, Shropshire.

Post Thu Jul 15, 2010 4:32 pm

town325i wrote:For the oil pressure switch i normally use a cranked spanner as my deep impact sockets are to thick to fit around the switch as its so close to the block
Nice one Mark...BTW, haven't forgotten I owe you some beer for collecting my shelf for me. :beer:
1989 325i SPORT Brilliantrot
town325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 7050
Joined: Thu Jun 26, 2008 11:00 pm
Location: cannock staffordshire

Post Thu Jul 15, 2010 4:38 pm

Glad you havnt i had :D You still got that Mg thing that was falling apart
Image
lowey
E30 Zone Regular
E30 Zone Regular
Posts: 316
Joined: Sat Aug 12, 2006 11:00 pm
Location: Telford, Shropshire.

Post Thu Jul 15, 2010 4:41 pm

town325i wrote:Glad you havnt i had :D You still got that Mg thing that was falling apart
Yeah! The wife's MGZR. Just cost an arm and a leg to get it through the MOT. The garage even washed it for her - apparently it's blue.
1989 325i SPORT Brilliantrot
town325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 7050
Joined: Thu Jun 26, 2008 11:00 pm
Location: cannock staffordshire

Post Thu Jul 15, 2010 4:42 pm

lowey wrote:
town325i wrote:Glad you havnt i had :D You still got that Mg thing that was falling apart
Yeah! The wife's MGZR. Just cost an arm and a leg to get it through the MOT. The garage even washed it for her - apparently it's blue.
Time to put it on the weigh bridge and be done with it.

Back on topic that gauge pod does look a nice bit of kit did it come with the dial or did you buy the seperate.

And as its you im guessing they wasnt cheap :D
Image
lowey
E30 Zone Regular
E30 Zone Regular
Posts: 316
Joined: Sat Aug 12, 2006 11:00 pm
Location: Telford, Shropshire.

Post Thu Jul 15, 2010 5:01 pm

The gauge pod has 2 holes ready for your own choice of dials - I got mine from Demon Tweeks, about £40 each. The cigarette lighter was already fitted and wired ready. The pod was $65 I think. Not TOO bad... :mad:
1989 325i SPORT Brilliantrot
town325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 7050
Joined: Thu Jun 26, 2008 11:00 pm
Location: cannock staffordshire

Post Thu Jul 15, 2010 6:05 pm

lowey wrote:The gauge pod has 2 holes ready for your own choice of dials - I got mine from Demon Tweeks, about £40 each. The cigarette lighter was already fitted and wired ready. The pod was $65 I think. Not TOO bad... :mad:
I take it this is another receipt hidden away from Kelly :)

Good thing about this pod is you get to keep the 12v socket
Image
lowey
E30 Zone Regular
E30 Zone Regular
Posts: 316
Joined: Sat Aug 12, 2006 11:00 pm
Location: Telford, Shropshire.

Post Thu Jul 15, 2010 6:24 pm

[/quote]I take it this is another receipt hidden away from Kelly :)

Good thing about this pod is you get to keep the 12v socket[/quote]

What she don't know won't hurt 'er. God, if she knew what I'd spent over the last 4 years. 8O 8O 8O

Receipts "filed". It's bad enough she pats me down when I approach the dish-washer, great bit of kit that for cleaning car parts!
1989 325i SPORT Brilliantrot
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Thu Jul 15, 2010 7:32 pm

An oil temp gauge is the most usefull.

The is a battery warning light in the instrument cluster and an oil pressure warning light as well.

Lose the volt meter and replace it with an oil temp gauge.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
User avatar
JWaller360
E30 Zone Regular
E30 Zone Regular
Posts: 508
Joined: Sun Jun 07, 2009 11:00 pm
Location: Rugby, Warks

Post Thu Jul 15, 2010 8:43 pm

Oil pressure warning light is more of an "oh Shi..." light, surely, as when this comes on, the engine is pretty much goosed anyway?
Image
m_jermyn
E30 Zone Team Member
E30 Zone Team Member
Posts: 4208
Joined: Sat Mar 14, 2009 11:00 pm
Location: Sydney Australia Mate

Post Thu Jul 15, 2010 10:11 pm

I ordered the same one from parker performance...... Looks nice, just have to wait till mine arrives