Hi all
I am getting a bad vibration when driving down the motorway to day it was that bad the dashboard was shaking it was doing at 70 and 95mph but at 100mph it was ok so of course I just drove a 100mph but its getting on my nerves now need to get it sorted. I have had all wheels balance and the tracking done so any help????
alexm3uk
bad vibrations
Moderator: martauto
-
HartgeH27
- E30 Zone Team Member

- Posts: 21737
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: Chichester
Worth getting propshaft and guibo checked out (the rubber coupling at centre of propshaft coupling).
Buckled wheel ???? Damaged/bent driveshaft ????
Get those checked/eliminated and then go from there!!!
Iain
Buckled wheel ???? Damaged/bent driveshaft ????
Get those checked/eliminated and then go from there!!!
Iain
-
E30BeemerLad
- Married to the E30 Zone

- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
spigot rings on your hubs. get them replaced, looking at about Ԛ£20 for them (all 4), sorted mine out nicely after my mates had spent many thousands replacing alloys, suspension etc etc etc
call this place called Wheels Uk and ask for John, tell him what your ride is and what alloys u got fitted. 02476 342999, I paid Ԛ£18.99 posted, came next day, good service
call this place called Wheels Uk and ask for John, tell him what your ride is and what alloys u got fitted. 02476 342999, I paid Ԛ£18.99 posted, came next day, good service
-
alexm3uk
- E30 Zone Regular

- Posts: 361
- Joined: Sat Jul 23, 2005 11:00 pm
- Location: orpington,kent
forgot to say the car is an e30 m3 and it has standard wheels on it
-
johnono
- E30 Zone Addict

- Posts: 4677
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: land of the vikings
check the wheels are bolted on tight, when i had mine ballanced recently he lad didnt do them up too well, or mabey the wheels "bed in" to the hubs a bit more creating a minute clearence.. of course that translates int wobbley whels so it worth a look... also have a double check that you havnԚ´t thrown a weight. ;)
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
i had the same problem,had the wheels balanced twice,tracking ckecked and it ended up being a front wheel bearing, easy enough to do yourself,i changed both front wheelbearings in under 3 hours.
