Quick Rack kits
Moderator: martauto
-
e21Jason
- E30 Zone Addict

- Posts: 2040
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Dubai, UAE
Hi Guys
As you can not buy them i had to get a batch of quick racks made to suit my e21. (you can see it here).
http://e21.tricord.be/registry/index.php?view=40
I can now get quick racks made for anything. so if i get a bout 12 people I could get a batch of 2.5 ratio racks made for the e30 (manual only).
The cost would be Ԛ£175.00 plus postage.
Drop a line if you are up for it.
Jason
As you can not buy them i had to get a batch of quick racks made to suit my e21. (you can see it here).
http://e21.tricord.be/registry/index.php?view=40
I can now get quick racks made for anything. so if i get a bout 12 people I could get a batch of 2.5 ratio racks made for the e30 (manual only).
The cost would be Ԛ£175.00 plus postage.
Drop a line if you are up for it.
Jason
-
dips346
- London Meets Main Man
- Posts: 3978
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: heston/heathrow
how much for a e21 left hand drive set up also after suspension set up tryed a few places no one has much and leda is way expensive thanks
-
dips346
- London Meets Main Man
- Posts: 3978
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: heston/heathrow
i have e-mailed you my number mate
-
keggy
- E30 Zone Regular

- Posts: 403
- Joined: Tue May 31, 2005 11:00 pm
- Location: omagh, Northen Ireland
wot is this? 
-
Dominitry
- E30 Zone Addict

- Posts: 2876
- Joined: Sat Mar 05, 2005 11:00 pm
- Location: Cardiff
Off topic but i recognise that E21, Chaos's old one!

-
jonbuoy
- E30 Zone Addict

- Posts: 2092
- Joined: Wed May 04, 2005 11:00 pm
- Location: Basildon, Essex
-
stoic
- E30 Zone Newbie

- Posts: 26
- Joined: Sun Oct 23, 2005 11:00 pm
Jason
I know this is an old thread but can you still get quick-racks for E30's
Ron
I know this is an old thread but can you still get quick-racks for E30's
Ron
-
e21Jason
- E30 Zone Addict

- Posts: 2040
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Dubai, UAE
Hi I can get them for the e30 but i have not got enough peolple on board yet only about 6 and I need 6 more
Jason
Jason
-
stoic
- E30 Zone Newbie

- Posts: 26
- Joined: Sun Oct 23, 2005 11:00 pm
Jason
OK, can u add me to your list?
Ron
OK, can u add me to your list?
Ron
-
Andy335Touring
- Married to the E30 Zone

- Posts: 7144
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Long Eaton,Nottingham
Is this a complete rack ready to bolt in or a kit you need to swap into your old rack ?
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
manual i assume
-
craigieeb
- E30 Zone Addict

- Posts: 4988
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: In my man cave modifying... something
jason, any luck with the price on the 5 audi racks mate?
do you need a rack first or are you able to get them made up anyway
do you need a rack first or are you able to get them made up anyway
M50 Turbo!!!
I shall say no more 
-
e21Jason
- E30 Zone Addict

- Posts: 2040
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Dubai, UAE
HI
Yes these are manual and you need to build them into your old rack housing.
Jason
PS i still waiting fo rthem to get back on the audi kits as they have not done them before.
Jason
Yes these are manual and you need to build them into your old rack housing.
Jason
PS i still waiting fo rthem to get back on the audi kits as they have not done them before.
Jason
-
Karan
- Married to the E30 Zone

- Posts: 8004
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Cheshunt, Hertfordshire
i want one 100%
-
rosscoe
- E30 Zone Regular

- Posts: 315
- Joined: Tue May 24, 2005 11:00 pm
- Location: newburgh,fife,scotland
You can count me in too
I had one on an old XR4i,heavy but good
I had one on an old XR4i,heavy but good
-
stoic
- E30 Zone Newbie

- Posts: 26
- Joined: Sun Oct 23, 2005 11:00 pm
Jason
Have u got the numbers u need yet?
Ron
Have u got the numbers u need yet?
Ron
-
ItalianM3
- E30 Zone Newbie

- Posts: 93
- Joined: Tue Sep 13, 2005 11:00 pm
I would be interested in one for my 320is (LHD), cheaper than an E36 M3 rack!
Just a couple of questions, what sort of proving time, treatment have they gone through? Are you going to be offering any sort of warranty?
I am just asking as these are not exactly fabricated subframe reinforcements, they are alot more technical. I am sure they have been tried and tested, just need more info before I make any decisions.
Thanks
Just a couple of questions, what sort of proving time, treatment have they gone through? Are you going to be offering any sort of warranty?
I am just asking as these are not exactly fabricated subframe reinforcements, they are alot more technical. I am sure they have been tried and tested, just need more info before I make any decisions.
Thanks
-
e21Jason
- E30 Zone Addict

- Posts: 2040
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Dubai, UAE
Hi
I am getting close to th e numbers but i need 33% up front which will be about Ԛ£50.
The down side is i have 10 e21 still to shift so i need to get them shifted to pick up some cash
As for warrenty no i don'y even ge toen when i buy htem unless they have manufacturing fault.
They are heat treated and made buy a motorsport supplier.
Jason
I am getting close to th e numbers but i need 33% up front which will be about Ԛ£50.
The down side is i have 10 e21 still to shift so i need to get them shifted to pick up some cash
As for warrenty no i don'y even ge toen when i buy htem unless they have manufacturing fault.
They are heat treated and made buy a motorsport supplier.
Jason
-
sohlman
- E30 Zone Newbie

- Posts: 21
- Joined: Fri Mar 04, 2005 11:00 pm
Jason,
May well be interested. Will be slightly over my budget just this second, but will find the money as it would be for my track car and could be very usefull.
James
May well be interested. Will be slightly over my budget just this second, but will find the money as it would be for my track car and could be very usefull.
James
-
tonyppe
- E30 Zone Regular

- Posts: 636
- Joined: Tue Feb 07, 2006 11:00 pm
- Location: Carshalton
this quick rack, can you keep the power steering? or do you have to loose it.
may sound like a silly question, but if the car is mean to have it, id like to keep it
may sound like a silly question, but if the car is mean to have it, id like to keep it
-
agent006
- E30 Zone Regular

- Posts: 701
- Joined: Thu Mar 10, 2005 11:00 pm
- Location: Cheltenham
Assuming there will be a delay getting them made (to get the cash together) then i'm in.
-
Dunx
- E30 Zone Regular

- Posts: 323
- Joined: Fri Apr 29, 2005 11:00 pm
Whats going on with this?
If its still going - how straight forward is it to build into the casing? and as asked - do you get to retain the power steering?
If its still going - how straight forward is it to build into the casing? and as asked - do you get to retain the power steering?
-
alpinac227
- E30 Zone Newbie

- Posts: 32
- Joined: Mon Oct 31, 2005 11:00 pm
Did you get these..? If so did they fit ok etc I'm considering a six branch wonder if anyone knows if that should fit around the quick rack, if the linkage is different as per the E36 rack conversion
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
anything come of this?
-
chu346
- E30 Zone Addict

- Posts: 2403
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Leicester
As stated in the first postDunx wrote:as asked - do you get to retain the power steering?
e21Jason wrote:I can now get quick racks made for anything. so if i get a bout 12 people I could get a batch of 2.5 ratio racks made for the e30 (manual only).
-
e21Jason
- E30 Zone Addict

- Posts: 2040
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Dubai, UAE
HI
Just to give you guys an update, I am still waiting to shift a load of e21 custom parts, to freeup soem cash, but i will be moving on this soon.
Jason
Just to give you guys an update, I am still waiting to shift a load of e21 custom parts, to freeup soem cash, but i will be moving on this soon.
Jason
-
Kos
- E30 Zone Team Member

- Posts: 15546
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
whats the score with these, i'm interested .
PUKAR DESIGNS - Reproduction BMW Decals Labels Sticker & Number Plates
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
-
jappa
- E30 Zone Newbie

- Posts: 3
- Joined: Fri Jan 13, 2006 11:00 pm
hello mate,can you get these for the e36 m3? i hate the steering
how much would 1 rack be and alternativley its worth your while posting this over on www.e36coupe.com as well as i know a few would be very interested
cheers
how much would 1 rack be and alternativley its worth your while posting this over on www.e36coupe.com as well as i know a few would be very interested
cheers
-
Lloydie38
- E30 Zone Regular

- Posts: 732
- Joined: Mon Jul 18, 2005 11:00 pm
- Location: Douglas, Isle of Man
I'm after a quick rack for my 325i and have been searching for a Z3 1.9 as I hear they have the leaset turns but if you are saying you can get a similar product made then I'd be interested...
Let me know
Cheers
Ian
PS - I know my pal here on the Isle of Man would have one too for his 325
Let me know
Cheers
Ian
PS - I know my pal here on the Isle of Man would have one too for his 325
The Isle of Man: No National Speed Limit, No Gatso's, No Nanny State, a disused airfield track 1.5 miles long, the best mountain road to drive on...Come and Play!
-
JoeE30
- E30 Zone Newbie

- Posts: 56
- Joined: Sun Jan 16, 2005 11:00 pm
- Location: Manchester
Yup i aswell would be interested, so all info is appreciated.

Cheers
Joe
Joe
-
chu346
- E30 Zone Addict

- Posts: 2403
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Leicester
This thread started:Thu Sep 15, 2005 2:33 pm

-
e21Jason
- E30 Zone Addict

- Posts: 2040
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Dubai, UAE
Hi
Has any boody got i preface lift manual rack LHD & RHD so i can get the first sample kits made up
If you want any more ifo PM me
Jason
Has any boody got i preface lift manual rack LHD & RHD so i can get the first sample kits made up
If you want any more ifo PM me
Jason



