conversion studs

All the info you need to race E30's

Moderator: martauto

Post Reply
User avatar
skid-kid
E30 Zone Newbie
E30 Zone Newbie
Posts: 86
Joined: Sat Aug 23, 2008 11:00 pm

Thu May 13, 2010 7:02 pm

hi all
could anyone tell me what the thread patten is for e30 hubs please

thanks rich
Top
Theo
Old Skooler
Old Skooler
Posts: 10735
Joined: Wed Jun 01, 2005 11:00 pm
Location: Kent

Thu May 13, 2010 7:41 pm

M12x1.5
Top
djs325
E30 Zone Newbie
E30 Zone Newbie
Posts: 248
Joined: Sat Jun 24, 2006 11:00 pm
Location: Melbourne, Australia

Thu May 13, 2010 11:40 pm

E30 is 4x100 PCD, other BMW is 5x120. Studs/bolts almost always M12x1.5.
E30racing.com.au - Like Production BMW Cup, but upside down!
Top
User avatar
skid-kid
E30 Zone Newbie
E30 Zone Newbie
Posts: 86
Joined: Sat Aug 23, 2008 11:00 pm

Fri May 14, 2010 5:38 pm

thanks alot guy much appreciated
:cool:
Top
User avatar
Brian28
E30 Zone Squatter
E30 Zone Squatter
Posts: 1596
Joined: Sat Jun 11, 2005 11:00 pm
Location: Bournemouth
Contact:
Contact Brian28

Fri May 14, 2010 5:56 pm

There are (or were) some on ebay, about forty quid for the full conversion set. Was a business seller that did a load of different cars so would likely come up on a search.
For sale - E30 320i racer project - sold.
Top
Theo
Old Skooler
Old Skooler
Posts: 10735
Joined: Wed Jun 01, 2005 11:00 pm
Location: Kent

Fri May 14, 2010 6:45 pm

I think you could get all the parts for less than £40 from Rally Design. You'll also need some high temperature thread lock to secure the studs in the hub.
Top
Post Reply

Return to “Motorsport / Track Day”