Cheers
M52 lambda position?
Moderator: martauto
Where abouts do the two lambdas go on the m52b28? The go in two different places down the exhaust iirc but i can't remember whereabouts
Cheers
Cheers
-
E30BeemerLad
- Married to the E30 Zone
- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
Here is a pic of some stock M52 manifold with lambdas if that helps?
Well Paul the lambda on your car currently is located in the centre box online with the gearbox.
Would be handy if we could keep this location to save work and mount the new one in proximy to it?
Lets see what others suggest first obviously
Would be handy if we could keep this location to save work and mount the new one in proximy to it?
Lets see what others suggest first obviously
I thought the position was different when using an e30 exhaust lee and not in the stock locations?
Im aware we`ve got too fit both lambdas.monkey wrote:tony i think you will need both lambdas as one is for cly 1 to 3 and the other is for 4 to 6 so you wont be able to keep them by the centre box . i think one needs to be in each half of the manifold
His current lambda is in the pipe closest to the gearbox halfway between the manifold and centre box,not in the centre box itself
-
E30BeemerLad
- Married to the E30 Zone
- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
My 2 lambdas are mounted quite far down the primary pipes near the gearbox bell housing on the S50 manifold
-
E30BeemerLad
- Married to the E30 Zone
- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
eko wrote:Lee what is CR24V?
The true elite Tony, very exclusive club
Gotta have a chromie (Cr chemical symbal for chrome)
Gotta have 24valves
Gotta have more than 200bhp
Gotta have 16" wheels and big brakes
No riff raff allowed
Ha ha ha the rules are out there.E30BeemerLad wrote:eko wrote:Lee what is CR24V?
The true elite Tony, very exclusive club
Gotta have a chromie (Cr chemical symbal for chrome)
Gotta have 24valves
Gotta have more than 200bhp
Gotta have 16" wheels and big brakes
No riff raff allowed
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
E30BeemerLad
- Married to the E30 Zone
- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
incidently the atomic number of chromium is also 24 
May the deceased join??E30BeemerLad wrote:eko wrote:Lee what is CR24V?
The true elite Tony, very exclusive club
Gotta have a chromie (Cr chemical symbal for chrome)
Gotta have 24valves
Gotta have more than 200bhp
Gotta have 16" wheels and big brakes
No riff raff allowed
Your dead!?eko wrote: May the deceased join??
Although it was still one of the first M50`s to grace these pages thougheko wrote:Oh just re read the rules...mine only had 191 brakes and diddy little povvo spec E30 anchors
**** its dead anyway so leave the poor bugger to RIP!
I did register and mention it but no responce as yetDanThe wrote:I thought that was stevetiggers car Tony?
Keep the lambdas in the stock position BTW
Nice 320i Steve.Steve!;3580 wrote: My 320i along side my Convertible (that ended up with the M50B25 engine also)
Do tell us more?
:frown:
Paul you know what I just though based on what Dan has said about location?
If you could live without your car/manifolds for a week or so I could give yours to Chris along with the other M52 ones and get him to mandrel bend/tig up a set at work using yours as a jig
..........cant do without the car though can you??[/quote]
God knows where i got the idea that they had to be moved from then 
Cheers guys (I'm getting excited again now! 
)
Cheers guys
(I'm getting excited again now! )