







Spec list :
Car-
1990 320i SE 2 door in Diamond black.
Engine-
M20 B27 built by myself using a rebuilt 525e bottom end and a highly modded 525e head with 325i cam. I also enlarged the ports to 325i size/shape the polished the exhaust side, the inlet manifold ports are matched to the head. Also bigger valves with a 3 angle grind fitted to matched seats.
Running a zone 2.7 chip with K&N panel filter and a standard 325i 3 piece exhaust.
Viscous fan removed and electric fan installed.
Last dyno'ed at 209 bhp and 212 lbft.
Gearbox/Diff-
Standard 1986 325i getrag 260 gearbox and a 3.91 large case open diff.
Wheels/Suspension-
15" BBS cross spokes, refurbed by myself and fitted with 205/55/15 Avon ZV3 tyres.
Eibach pro-kit -35mm springs, Sachs sport gas dampers.
325i touring anti-roll bars, 20mm front/18.5mm rear.
Rear strut brace, Front one is off for modification to clear heated washer jets.
Brakes-
Front: Ate power discs with Pagid fast road pads.
Rear: Standard discs with standard pads.
Goodridge braided hoses and AP Lockheed DOT5.1 fluid.
Interior-
Grey dashboard to compliment grey leather sports seats & SE interior.
Instrument rings and red needles.
AC Schnitzer foot rest and pedals.
Exterior-
Fogs.
Headlight wash/wipe (working)
Red rear light clusters
Genuine german number plate holders sourced by myself from Hanko BMW in Koblenz.
LED type Angel eyes.
Clear front and side indicators.
Heated washer jets/mirrors/drivers side lock barrel.
Future plans-
51mm 325i struts to replace skinny 320i struts.
Uprated rear discs/fast road pads.
Shrick camshaft.
Induction kit with heatshield.
6 branch manifold.
New front wings.
2 new doors.
OSR wheel arch.
Rear bottom valance.
3.73 diff.
IS lip spoiler.
Anything else that catches my eye.
Cheers,
Iain T


















