Power Hood problem!! Control Box

[bimmer_e30]

Hi my powerhood dont work!

Following the link someone sent me before

http://www.e30ic.com/powertop.htm#realignment

I went to the control box and cannot find the current in the circular silver things on the unit is that where I should find a 12v current if I was to earth it?? I am getting a current in to the box as I could see a 12v current on the pipe thing between the blue things on each side!!

the motors do work as I have check them with 12v and it did work with the switch before!

URL=http://img214.imageshack.us/i/dscf1377.jpg/][/URL]

[bimmer_e30]

sorry I know the images are not great I will re upload them tmr

[DaveD]

hi

download this ...

http://www.filefactory.com/file/ag2ahf9 ... Manual.zip

there is a section on that in there ...I have never dismantled mine so I dont know about it

[bimmer_e30]

how do i open this as im not registered???

[DaveD]

just go down to the bottom and press "download ..with file factory basic"

[bimmer_e30]

[bimmer_e30]

eventually got the images up

[bimmer_e30]

sorry after messing around for the past hour i still cant see what it is your showing me?

[DaveD]

haven't you managed to download the manual?

http://www.filefactory.com/dlf/f/ag2ahf ... Manual.zip

[bimmer_e30]

Ive downloaded it and opening it using winrar however it say there is an error with the archive