Will this look good......

Show off your pride and joy here

Moderator: martauto

leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9535
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Post Fri Mar 26, 2010 11:50 pm

ImysE30 wrote:
leeparkes wrote:If your going for something wide your gonna need the wheels to match, what wheels are you thinking?
I was thinking of getting some 8J front's and 9J rear's. Will be using 5 stud so i think these width's should be okay.

Dips has some very nice Style 5's for sale :wink:
If you went with the reiger kit you would need more than 9j to pull the look off.

Try image rims, there not cheap mind 8O
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Fri Mar 26, 2010 11:51 pm

Get a grip imy :roll:

Yours is a facelift so tech II, a set of 16" Pinas or Hartge wheels. A lovely cream or black leather interior (think you allready have black)

you say there are thousands of tech 2 cabs, well most of them are molesterd pre faclifts with shite tech II kits yours is the proper car for a tech II kit

and get some morsels for it

Rieger more like fooking shite :D
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Fri Mar 26, 2010 11:56 pm

leeparkes wrote:
ImysE30 wrote:
leeparkes wrote:If your going for something wide your gonna need the wheels to match, what wheels are you thinking?
I was thinking of getting some 8J front's and 9J rear's. Will be using 5 stud so i think these width's should be okay.

Dips has some very nice Style 5's for sale :wink:
If you went with the reiger kit you would need more than 9j to pull the look off.

Try image rims, there not cheap mind 8O
I'd only use the front and rear Rieger bumpers and use M3 arch's for that different look :)

I've seen a nice set on Image, worked out at around £1200 or £1300, so not too bad, that was 8.5 front and 10.5 rear i think 8)
Current Fleet:

E30 335i Turbo M3 Convertible Replica
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Fri Mar 26, 2010 11:57 pm

Alex wrote:Get a grip imy :roll:

Yours is a facelift so tech II, a set of 16" Pinas or Hartge wheels. A lovely cream or black leather interior (think you allready have black)

you say there are thousands of tech 2 cabs, well most of them are molesterd pre faclifts with shite tech II kits yours is the proper car for a tech II kit

and get some morsels for it

Rieger more like fooking shite :D
C'mon Alex, that's far too OEM for me :D

Got to be wild and different winkeye
Current Fleet:

E30 335i Turbo M3 Convertible Replica
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9535
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Post Fri Mar 26, 2010 11:59 pm

ImysE30 wrote:I've seen a nice set on Image, worked out at around £1200 or £1300, so not too bad, that was 8.5 front and 10.5 rear i think 8)
iirc Bootyman gets a discount from Image

Go on imy fill ya boots
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Sat Mar 27, 2010 12:04 am

leeparkes wrote:
ImysE30 wrote:I've seen a nice set on Image, worked out at around £1200 or £1300, so not too bad, that was 8.5 front and 10.5 rear i think 8)
iirc Bootyman gets a discount from Image

Go on imy fill ya boots
Well i've got a few idea's at the moment, finding a set of M3 arches will be difficult, probably rule out this idea.

I'm thinking towards 'Sleeper Look' now, give other's that element of suprise winkeye

Nice Tech 2 kit fitted, deep dish wheels, flared arches and slammed to the ground :cool:
Current Fleet:

E30 335i Turbo M3 Convertible Replica
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Sat Mar 27, 2010 12:05 am

ImysE30 wrote:
leeparkes wrote:
ImysE30 wrote:I've seen a nice set on Image, worked out at around £1200 or £1300, so not too bad, that was 8.5 front and 10.5 rear i think 8)
iirc Bootyman gets a discount from Image

Go on imy fill ya boots
Well i've got a few idea's at the moment, finding a set of M3 arches will be difficult, probably rule out this idea.

I'm thinking towards 'Sleeper Look' now, give other's that element of suprise winkeye

Nice Tech 2 kit fitted, deep dish wheels, flared arches and slammed to the ground :cool:
Don't you fukin' dare!!!!
That's my look. :twisted:
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Sat Mar 27, 2010 12:07 am

Rav335uk wrote:
ImysE30 wrote:
leeparkes wrote: iirc Bootyman gets a discount from Image

Go on imy fill ya boots
Well i've got a few idea's at the moment, finding a set of M3 arches will be difficult, probably rule out this idea.

I'm thinking towards 'Sleeper Look' now, give other's that element of suprise winkeye

Nice Tech 2 kit fitted, deep dish wheels, flared arches and slammed to the ground :cool:
Don't you fukin' dare!!!!
That's my look. :twisted:
Well that's what i mean Rav :mad:

I want a unique one off look that no-one else will have, see my point now :wink:
Current Fleet:

E30 335i Turbo M3 Convertible Replica
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Sat Mar 27, 2010 12:07 am

ImysE30 wrote:
Alex wrote:Get a grip imy :roll:

Yours is a facelift so tech II, a set of 16" Pinas or Hartge wheels. A lovely cream or black leather interior (think you allready have black)

you say there are thousands of tech 2 cabs, well most of them are molesterd pre faclifts with shite tech II kits yours is the proper car for a tech II kit

and get some morsels for it

Rieger more like fooking shite :D
C'mon Alex, that's far too OEM for me :D

Got to be wild and different winkeye
if your really into the "innit" scene, you will be miles better off with some rice turd

if you really want to down wide arch route then your only choice is the M3 look even that is hard to pull off.

bootymans car for instance, its not my kinda thing but i seen it at the POD and you can tell he has spent an arm and a leg on it, at least 10 Grand or so probably double that looking at the mental ICE he has, unless you are going to spend that much your going to end up with something like this

Image

now 10k would get your m30 rebuilt, any rust sorted, sorted suspension and brakes, possibly a respray and you would have a mint cabby
Blitz
Married to the E30 Zone
Married to the E30 Zone
Posts: 11151
Joined: Mon Jan 30, 2006 11:00 pm
Location: East London+Basildon

Post Sat Mar 27, 2010 12:08 am

ImysE30 wrote:That spoilers huuuugeeee :eek: :eek:

How about this then (pic's been borrowed and edited):

Image
I like this one. Tech II with flared arches.
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9535
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Post Sat Mar 27, 2010 12:10 am

ImysE30 wrote:I'm thinking towards 'Sleeper Look' now, give other's that element of suprise
Make you mind up :banghead:

Sleeper ftw 8)
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Sat Mar 27, 2010 12:10 am

Alex wrote:
ImysE30 wrote:
Alex wrote:Get a grip imy :roll:

Yours is a facelift so tech II, a set of 16" Pinas or Hartge wheels. A lovely cream or black leather interior (think you allready have black)

you say there are thousands of tech 2 cabs, well most of them are molesterd pre faclifts with shite tech II kits yours is the proper car for a tech II kit

and get some morsels for it

Rieger more like fooking shite :D
C'mon Alex, that's far too OEM for me :D

Got to be wild and different winkeye
if your really into the "innit" scene, you will be miles better off with some rice turd

if you really want to down wide arch route then your only choice is the M3 look even that is hard to pull off.

bootymans car for instance, its not my kinda thing but i seen it at the POD and you can tell he has spent an arm and a leg on it, at least 10 Grand or so probably double that looking at the mental ICE he has, unless you are going to spend that much your going to end up with something like this

Image

now 10k would get your m30 rebuilt, any rust sorted, sorted suspension and brakes, possibly a respray and you would have a mint cabby
Bootyman's spent more like 80k on his :o

You've got a good point Alex :) I'm keeping my options open winkeye
Current Fleet:

E30 335i Turbo M3 Convertible Replica
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Sat Mar 27, 2010 12:13 am

Last edited by Rav335uk on Sat Mar 27, 2010 12:14 am, edited 1 time in total.
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
FMH
E30 Zone Addict
E30 Zone Addict
Posts: 3213
Joined: Tue Jun 02, 2009 11:00 pm
Location: Birmingham

Post Sat Mar 27, 2010 12:13 am

have you seen the thread where someones got custom made arches and fitting tech 2 bumpers. cant remember his username, but its the coupe

edit: think its kingcruiser
Last edited by FMH on Sat Mar 27, 2010 12:13 am, edited 1 time in total.
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9535
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Post Sat Mar 27, 2010 12:13 am

Where's that pic of that green euro look cab?

I know you got it somewhere imy :D
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Sat Mar 27, 2010 12:15 am

Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Sat Mar 27, 2010 12:16 am

600 Euro's, fook that :mad:

FMH - Yeah it's Kingcruizer, i could give him my cabby shell and get him to do something similar to mine :twisted:

Lee - This one right:

Image

winkeye
Current Fleet:

E30 335i Turbo M3 Convertible Replica
Cook318IS
E30 Zone Addict
E30 Zone Addict
Posts: 4586
Joined: Fri Jun 08, 2007 11:00 pm
Location: Torquay

Post Sat Mar 27, 2010 12:18 am

you're willing to spend a fortune on rieger and general council tat but you won't buy genuine m3 stuff :screwy:
Image
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9535
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Post Sat Mar 27, 2010 12:19 am

ImysE30 wrote:Lee - This one right:

Image

winkeye
Im sure ive seen more pics of it

What about this look?
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Sat Mar 27, 2010 12:21 am

Cook318IS wrote:you're willing to spend a fortune on rieger and general council tat but you won't buy genuine m3 stuff :screwy:
I'd buy the right M3 part's for the right money :)

Arches are what i would want :wink:
Current Fleet:

E30 335i Turbo M3 Convertible Replica
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Sat Mar 27, 2010 12:22 am

Rav335uk wrote:Banded Steelies

Image
Image
just needs a no 9 on the bonnet winkeye
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Sat Mar 27, 2010 12:23 am

More Pic's Lee:

Image

And a similar one:

Image
Image
Image

I kinda like this look, looks kinda sleeper'ish :cool:
Current Fleet:

E30 335i Turbo M3 Convertible Replica
User avatar
AlpineAde
E30 Zone Team Member
E30 Zone Team Member
Posts: 3829
Joined: Sun Feb 25, 2007 11:00 pm
Location: Melbourne, Australia

Post Sat Mar 27, 2010 12:40 am

Imy, I know exactly the look you need.

Imagine your cab done in this style:

http://www.e30zone.net/modules.php?name ... highlight=

Wow!

:D

(EDIT: I think Rav, in the above thread, beat me to it)
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Sat Mar 27, 2010 12:47 am

It'd look phat innit! :)
Current Fleet:

E30 335i Turbo M3 Convertible Replica
User avatar
AlpineAde
E30 Zone Team Member
E30 Zone Team Member
Posts: 3829
Joined: Sun Feb 25, 2007 11:00 pm
Location: Melbourne, Australia

Post Sat Mar 27, 2010 12:54 am

:D
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Sat Mar 27, 2010 7:25 am

How about you just actually DO something with the car then come back and surprise us!
B7's Motto. "If it's French, BURN IT!!!!!!"
User avatar
harry_p
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5313
Joined: Thu Oct 12, 2006 11:00 pm
Location: norfolk

Post Sat Mar 27, 2010 8:12 am

ImysE30 wrote:
Well i've got a few idea's at the moment, finding a set of M3 arches will be difficult, probably rule out this idea.
an so it starts :roll:

obviously you havent tried very hard. front and rear arches are still avaliable from bmw, c3 bmw have them in stock.

how about just making your mind up and do what you want to do, and just get on with it. after all, if you're doing it to please yourself and genuinely don't care what others think then why the need for all these teaser and opinion gathering posts?

do what you want to do, sod anyone else. i will look forward to reading about it on barryboys.
cheers,

harry
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Sat Mar 27, 2010 2:13 pm

harry_p wrote:
ImysE30 wrote:
Well i've got a few idea's at the moment, finding a set of M3 arches will be difficult, probably rule out this idea.
obviously you havent tried very hard. front and rear arches are still avaliable from bmw, c3 bmw have them in stock.
Just had a look and they only got fibreglass front wings, no rear one's :wink:
Current Fleet:

E30 335i Turbo M3 Convertible Replica
aaronsmart
E30 Zone Regular
E30 Zone Regular
Posts: 822
Joined: Fri Dec 18, 2009 11:00 pm
Location: Bournemouth

Post Sat Mar 27, 2010 3:50 pm

ImysE30 wrote:I've been thinking about ideas on how to design the bodywork on my cabby so it looks meaner, want an aggressive kind of look.

Rieger Front and Rear bumpers (pic's borrowed from bootyman, hope you don't mind :wink: ):

Image
Image

And then E30 M3 (or similar) wide arches but with also Tech 2 pods fitted (can't find a pic of this but something like below):

Image

Something like this would be nice :cool:

Image

Am i crazy :P

YOUR NUTS! haha
they only look good in professional photos
but good luck! 8O