Mint condition inner wing...

Show off your pride and joy here

Moderator: martauto

billgatese30
E30 Zone Team Member
E30 Zone Team Member
Posts: 10989
Joined: Sun Jan 09, 2005 11:00 pm
Location: Tyne & Wear

Post Wed Mar 17, 2010 2:15 pm

...not :cry:

Image

more work and expenditure I don't need :-x
Baz666
E30 Zone Addict
E30 Zone Addict
Posts: 3516
Joined: Fri Feb 29, 2008 11:00 pm
Location: Ipswich, Suffolk

Post Wed Mar 17, 2010 4:16 pm

feel for ya dude i`v got the same to do on mine :cry:
Image
E46 328ci, sport bumpers, 19" style 95`s
E30BeemerLad
Married to the E30 Zone
Married to the E30 Zone
Posts: 16806
Joined: Mon Mar 28, 2005 11:00 pm
Location: Norfolk

Post Wed Mar 17, 2010 4:37 pm

that on the Sport Chris or the weapon?
billgatese30
E30 Zone Team Member
E30 Zone Team Member
Posts: 10989
Joined: Sun Jan 09, 2005 11:00 pm
Location: Tyne & Wear

Post Wed Mar 17, 2010 4:38 pm

I had to do the passenger side last year and that is now as solid as a rock, unfortunatley most of the drivers side now reisdes in the bin and between the cracks on the drive :roll:

what a fun thing to be doing after a 12 hour night shift :o


Its on the sport Lee. its almost made its 20th birthday (july this year), and combined that it gets used everyday and parked outside means that fighting rust is a case of when, not if :cry:
bmwe30mtech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5288
Joined: Thu Feb 03, 2005 11:00 pm

Post Wed Mar 17, 2010 4:44 pm

Ouch. I would get the old full inner arch panels removed, by drilling out the spot welds. Then buy some new inner arch panels from BMW and get them spot welded in using weld-through primers. Is the rear quarter panel arch lip ok?

Then cover the thing in waxoyl!

I remember seing a similar pile of rust on my drive shortly before I had my rear quarters and inners replaced.

Yours is such a nice car its worth doing right.
1988 M3 EvoII, Macau Blue/EvoII trim
1989 325i Sport M Tech II, Diamond Black/Black leather
billgatese30
E30 Zone Team Member
E30 Zone Team Member
Posts: 10989
Joined: Sun Jan 09, 2005 11:00 pm
Location: Tyne & Wear

Post Wed Mar 17, 2010 5:06 pm

bmwe30mtech wrote:Ouch. I would get the old full inner arch panels removed, by drilling out the spot welds. Then buy some new inner arch panels from BMW and get them spot welded in using weld-through primers. Is the rear quarter panel arch lip ok?

Then cover the thing in waxoyl!

I remember seing a similar pile of rust on my drive shortly before I had my rear quarters and inners replaced.

Yours is such a nice car its worth doing right.
thats what I did on the other side last year, and will be doing again this time around.


:D
billgatese30
E30 Zone Team Member
E30 Zone Team Member
Posts: 10989
Joined: Sun Jan 09, 2005 11:00 pm
Location: Tyne & Wear

Post Wed Mar 17, 2010 5:19 pm

right, here's some proper photos


the mess that a few taps of my corrosion assesment tool (big ratchet with a flat screwdriver blade attached) left behind on my drive

Image

What I was left with

Image

Image

Image

Image

and on the inside

Image



and hopefully what it should look like (this is last years repair on the passenger side)

Image

Image

the internal welds are now wirebrushed and protected btw

Image



ah well, so much for some time off between shifts, at least I am done with nightshift now untill next week :?
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Wed Mar 17, 2010 5:25 pm

Ouch :( looks quite bad, at least your getting it sorted Chris :)

will be good for another 20 years :D
billgatese30
E30 Zone Team Member
E30 Zone Team Member
Posts: 10989
Joined: Sun Jan 09, 2005 11:00 pm
Location: Tyne & Wear

Post Wed Mar 17, 2010 5:28 pm

Hopefully Alex, it does look like the original inner wing as I can't see any other seams anywhere, so unless it was refitted with a proper spot welder rather than a MIG then I am not too miffed that it has gone considering I use the car daily and it doesn't stay in the garage.

The other side was in a similar state of disrepair last year and again, looked remarkably original from what I remember, although I didn't have a look at the inside that time.
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Wed Mar 17, 2010 6:02 pm

8)
Dezzy
CR24v it's a lifestyle
Posts: 11974
Joined: Thu May 15, 2008 11:00 pm
Location: Middlesbrough

Post Wed Mar 17, 2010 6:05 pm

It's a sh1t job mate but once done you will be happy knowing it's solid again.

Plus once done you can sort my bits out. So get a move on. winkeye
Image
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Wed Mar 17, 2010 6:06 pm

You doing it all yourself Chris?
billgatese30
E30 Zone Team Member
E30 Zone Team Member
Posts: 10989
Joined: Sun Jan 09, 2005 11:00 pm
Location: Tyne & Wear

Post Wed Mar 17, 2010 6:14 pm

I have a mate who has a bodyshop in Bishop and me and my brother are buying a van off him so I might see if he will do it as he isn't too rushed. I could do it, but for the time it would take, I'd be better off (financially) doing overtime at work, plus he can repaint the arch lip whilst its there, otherwise I'd only have to take it down for him to do that too. :D
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Wed Mar 17, 2010 6:20 pm

billgatese30 wrote:I have a mate who has a bodyshop in Bishop and me and my brother are buying a van off him so I might see if he will do it as he isn't too rushed. I could do it, but for the time it would take, I'd be better off (financially) doing overtime at work, plus he can repaint the arch lip whilst its there, otherwise I'd only have to take it down for him to do that too. :D
8) Whats the bodyshop called? Bishop is only a few miles away from me, i will probably need one to get my cabby sorted once roadworthy, and if your using him he is obviosly good :D

is he expensive??
billgatese30
E30 Zone Team Member
E30 Zone Team Member
Posts: 10989
Joined: Sun Jan 09, 2005 11:00 pm
Location: Tyne & Wear

Post Wed Mar 17, 2010 6:28 pm

I know him as "Dirty" Nige, proper name is Nigel Hull, but I don't know what he called his shop. He is based next to the hippodrome (down the back lane down the side of the bingo). He does good work and is an ace fabricator/welder and is good with a spray gun too.

Not sure on his price to joe public, but I doubt it will be too bad for me for what I want done. :D
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Wed Mar 17, 2010 6:31 pm

billgatese30 wrote:I know him as "Dirty" Nige, proper name is Nigel Hull, but I don't know what he called his shop. He is based next to the hippodrome (down the back lane down the side of the bingo). He does good work and is an ace fabricator/welder and is good with a spray gun too.

Not sure on his price to joe public, but I doubt it will be too bad for me for what I want done. :D
might have to bare him in mind :D

i would take it to beardymatt but he isnt too local :)
billgatese30
E30 Zone Team Member
E30 Zone Team Member
Posts: 10989
Joined: Sun Jan 09, 2005 11:00 pm
Location: Tyne & Wear

Post Wed Mar 17, 2010 6:45 pm

have a read here

http://www.aircooled-eliminators.co.uk/ ... a&start=45

page 4 and onwards for some examples of his work


I would use Matt too, but as you say, Sheffield is just too far for most small jobs, its not like I need a full baremetal resto.
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Wed Mar 17, 2010 6:48 pm

Looks very good indeed, love the red Mk1 golf 8)
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Wed Mar 17, 2010 6:55 pm

:cry:
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
Dezzy
CR24v it's a lifestyle
Posts: 11974
Joined: Thu May 15, 2008 11:00 pm
Location: Middlesbrough

Post Wed Mar 17, 2010 6:56 pm

Agreed alex. Think the sport will be in good hands chris. :D
Image
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
billgatese30
E30 Zone Team Member
E30 Zone Team Member
Posts: 10989
Joined: Sun Jan 09, 2005 11:00 pm
Location: Tyne & Wear

Post Wed Mar 17, 2010 7:05 pm

bss325i wrote::cry:
unless I can find a BonkeRS style car I'm afraid it must be done Barry.

at the end of the day, it hardly leads the life of a show queen :P
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Wed Mar 17, 2010 7:15 pm

billgatese30 wrote:
bss325i wrote::cry:
unless I can find a BonkeRS style car I'm afraid it must be done Barry.

at the end of the day, it hardly leads the life of a show queen :P
'tis true m friend.

Not fancy a daily shit box?
billgatese30
E30 Zone Team Member
E30 Zone Team Member
Posts: 10989
Joined: Sun Jan 09, 2005 11:00 pm
Location: Tyne & Wear

Post Wed Mar 17, 2010 7:20 pm

I have no room on the drive for a 3rd car otherwise I may end up having to sleep in one of them :o

and I can't bring myself to sell either this or the S50 (unless you want to buy it back winkeye )
Dezzy
CR24v it's a lifestyle
Posts: 11974
Joined: Thu May 15, 2008 11:00 pm
Location: Middlesbrough

Post Wed Mar 17, 2010 7:21 pm

Yeh like an M52 compact.
That's my next project. Track slag with a shell I couldn't give a sh1t about and handling very simular to an E30. :D
Image
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
Simon
E30 Zone Team Member
E30 Zone Team Member
Posts: 14939
Joined: Sun Jan 09, 2005 11:00 pm
Location: South Wales

Post Thu Mar 18, 2010 10:17 am

How long have you had this car now Chris?

I remember having the lips done due to them starting to bubble, but the inners were solid.

Many miles on it now?
Image
billgatese30
E30 Zone Team Member
E30 Zone Team Member
Posts: 10989
Joined: Sun Jan 09, 2005 11:00 pm
Location: Tyne & Wear

Post Thu Mar 18, 2010 12:53 pm

134k on it now Simon, I think I will have had it about 5 years now. Still my everyday car but still gets looked after, needs an Inspection II soon :cry:
gazm3
E30 Zone Addict
E30 Zone Addict
Posts: 3323
Joined: Sun Jan 09, 2005 11:00 pm

Post Thu Mar 18, 2010 1:14 pm

Extra salt in the NEast :?:
Image
billgatese30
E30 Zone Team Member
E30 Zone Team Member
Posts: 10989
Joined: Sun Jan 09, 2005 11:00 pm
Location: Tyne & Wear

Post Thu Mar 18, 2010 1:15 pm

Too many burger king's Gaz :o
gazm3
E30 Zone Addict
E30 Zone Addict
Posts: 3323
Joined: Sun Jan 09, 2005 11:00 pm

Post Thu Mar 18, 2010 1:20 pm

Wedge a few whoppers in the rusty turd and flog it on.
You taken the kit off recently Chris?
My Msport was going this way and got sold quickly to another victim.
Image
Simon
E30 Zone Team Member
E30 Zone Team Member
Posts: 14939
Joined: Sun Jan 09, 2005 11:00 pm
Location: South Wales

Post Thu Mar 18, 2010 3:49 pm

134k, not too bad, thought it would be more.


I blody hate rust :cry:
Image
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15448
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus

Post Thu Mar 18, 2010 4:10 pm

there comes a time when e30's are not best used as daily drivers, especially the rarer ones.

might be worth looking into buying a cheaper shit box as a daily.
billgatese30
E30 Zone Team Member
E30 Zone Team Member
Posts: 10989
Joined: Sun Jan 09, 2005 11:00 pm
Location: Tyne & Wear

Post Thu Mar 18, 2010 4:57 pm

problem is though Kos, I also have the S50 (again, rust free, even the inner wings) and I have it on limited mileage with it being the track/weekend car. my drive (live at home so my mams car lives in the garage and my old mans car is there during the week too) is only wide enough for one car except for the little bit round the corner where the S50 lives, a third car just wouldn't work, and if I put one of them in storage it just wouldn't get used and I may as well sell it anyway. I will have to sell it eventually, but at the moment unless someone comes and offers me plenty of cash then I just can't see it happening.
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15448
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus

Post Fri Mar 19, 2010 1:02 am

storage can be a bugger, might be time to make the sport the weekend car, the S50 the track car and have hack. putting a track car in storage shouldnt cost too much, but it all means money :cry:

i'm lucky to have space for all my turds, and other peoples !!
dips346
London Meets Main Man
Posts: 3977
Joined: Fri Jan 14, 2005 11:00 pm
Location: heston/heathrow

Post Fri Mar 19, 2010 1:24 am

Kos wrote:
i'm lucky to have space for all my turds, and other peoples !!
oi dont be like that
Andy325i
E30 Zone Addict
E30 Zone Addict
Posts: 4052
Joined: Mon Jan 10, 2005 11:00 pm
Location: Avon

Post Fri Mar 19, 2010 1:43 am

Awesome work :) Can you change the outer part of the inner wing without cutting the outer wing about?
Image
M50B25NonVanos & M52B28Vanos Heads for sale. Pm Me.