Jim's mate Andy's Project Rust 323i - LOTS OF PICTURES

Show off your pride and joy here

Moderator: martauto

Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Tue Mar 16, 2010 4:43 pm

Well... My mate Andy was suppose to get some pics on here but he still hasnt got round to it so I thought I would seeing as its been all my handy work restoring this rusty turd...

Keep in mind when I stay Restore, I mean tidy up the edges kinda thing...

He brought it from a Zoner on here for 400 quid which wasn't too bad... It did have a fair bit of rust which was a concern at first as we wasnt 100% on what we couldnt see, but over looking it properly once we got it back and it looked pretty solid...

The bonnet was white though from fading... It has dents in every single panel (Which alot still need sorting)

Once we got it home, we put some bottle tops straight on it as the steelies were not doing anything for it at all...

Since then I brought a cab and he currently has some 17" Alpina reps on it until I want them back or he sources his own... It hasnt been lowered so the 17" take the edge of its height. lol

So far its cost him 400 for the car, 12 quid on 2 rattle cans and 6 quid on some primer... And lots of help from me for free...

I did pick up some front wings from Kedge on here but turned out they were pretty rusty when grinded them back a bit (No worries though mate) but gonna treat them and fix them up for spares anyway now.

He needs to get a back box sorted on it too as its got a few holes round the pipes on the inside side of the back box...

Other than that, its not bad...

When we put the wheels on last week, I re seal the bottom shadow line with some under seal as I got a bit of over spray on it, but it tidied it up really well as you'll see in the pictures. Also did all the wheel arches so made it look really fresh


Here are the pictures so far...

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image



Anyway... Thats my handy work done for now, but i'm sure we'll be doing bits every week as the weather does seem to be getting better...

What do you think???
Baz666
E30 Zone Addict
E30 Zone Addict
Posts: 3516
Joined: Fri Feb 29, 2008 11:00 pm
Location: Ipswich, Suffolk

Post Tue Mar 16, 2010 4:55 pm

I want a chromie next winkeye looks really good buddy :cool:
Image
E46 328ci, sport bumpers, 19" style 95`s
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Tue Mar 16, 2010 4:58 pm

Chromies are well cool, I can't wait to respray mine in the summer to get it looking good... Waiting to get the cab on the road first though.
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Tue Mar 16, 2010 5:14 pm

Cool project you got the mate, even though it's not yours :P . Doesn't look rotten just a few scabby bits, what are the sills, inner arches and the rest of the common rot areas like?

Wasn't sure there would be anything you could do with the wings.

God i really need to get cracking on my Chromie!!
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
User avatar
rob0r
E30 Zone Regular
E30 Zone Regular
Posts: 638
Joined: Tue Apr 03, 2007 11:00 pm

Post Tue Mar 16, 2010 5:21 pm

Nice car, but aren't those bolt holes on the wheels a bit too close for comfort?
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Tue Mar 16, 2010 5:55 pm

rob0r wrote:Nice car, but aren't those bolt holes on the wheels a bit too close for comfort?
Typical Alpina reps and why many people won't have them anywhere near their cars, me being one of them. Seen several weels (still on cars being used) with cracks around the stud holes. :eek: , one was at Le Mans and all four were cracked and he'd driven all that distance :eek:
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Tue Mar 16, 2010 6:54 pm

Hmmm... Hopefully they dont crack as niether of us drive agressive, but I suppose its just down to wear if they do crack... As for the rusty areas, lots of surface scabs around the grills and lights, any thin bits have scrabs but they will be sorted through the summer now I think, we got the major parts sorted for now.
I think Lowering is on the cards at some point, but depends on his funds... Needs a new interior too, He ideally wants a leather cream, sport or comfort, doesnt mind... Then either some bbs or Alpinas... Reps will be fine if he can get hold of some.
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Tue Mar 16, 2010 7:13 pm

No Jim, he doesn't want Alpina reps :wink:

Does need lowering like all chromies :mad:
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Tue Mar 16, 2010 7:16 pm

Lol, I will tell him that, but he would settle for anything to get it looking nice for now... But I suppose he has my alpina reps to see if they crack... lol

And yeah, its a must on the lowering. I will be changing mine at some point for something descent as I have a 60 quid lowering kit from gfs so want something much better, need advise but got no cash for some time as moving, but once I have got that, he can have the cheap ones off mine if he hasnt sorted it by then.
Ollie_bwoii
Married to the E30 Zone
Married to the E30 Zone
Posts: 8695
Joined: Sat May 17, 2008 11:00 pm
Location: Northampton

Post Tue Mar 16, 2010 7:31 pm

It was all going so well, until.......................


















:clin: Alpina reps were mentioned.
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Tue Mar 16, 2010 7:59 pm

Lol, beats the bottle tops... It looked like yours Ollie with em on. ;)
User avatar
blackE30indy
E30 Zone Camper
E30 Zone Camper
Posts: 1285
Joined: Sun Mar 30, 2008 11:00 pm
Location: leicester/uk

Post Tue Mar 16, 2010 8:02 pm

Looks good jim,I've got the alpina reps on mine too, but looking for
a set of original pina's :D
Ollie_bwoii
Married to the E30 Zone
Married to the E30 Zone
Posts: 8695
Joined: Sat May 17, 2008 11:00 pm
Location: Northampton

Post Tue Mar 16, 2010 8:10 pm

Jim320i wrote:Lol, beats the bottle tops... It looked like yours Ollie with em on. ;)
Believe me they don't. Just awful wheels to look at and from experiences I've seen and heard.

Still it will be a nice looking 323 when your friend see's sence in bottletops or 15" BBS. :D
Ranchero
E30 Zone Addict
E30 Zone Addict
Posts: 2563
Joined: Thu Sep 17, 2009 11:00 pm

Post Tue Mar 16, 2010 8:15 pm

Car's looking good. - your camera's f**ked though.
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Tue Mar 16, 2010 8:16 pm

looks tidy, but the wheels do it no favours :)
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Tue Mar 16, 2010 8:50 pm

As much as i hate bottle tops i would prefer them the Alpina Reps, no need to go will Ollies OEM fettish though :P . Although there aren't that many cheapish alloys that suit E30s other than BBS'. My OZs would look wicked on it though 8) .
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Tue Mar 16, 2010 9:40 pm

You can let me have them Kedge and I will let him use them for a while. :D It really doesnt look good with bottletops at that height, I personally prefer the reps... They need centre caps and they would look ok... You cant tell unless you know exactly what your looking at... I think i'm gonna make some centres too as they are well expensive.

And yes Ranchero, my camera is absolute pants

Its sweet little car though now, just brought some chromeline for front and back too off a zoner so that will be fitted next.
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Tue Mar 16, 2010 9:49 pm

Haha, nah they'll be going back in the garage soon. Need to get the BBS refurbed though. Surely the center caps for the reps aren't dear, just the genuine Alpina caps that cost the earth.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Wed Mar 17, 2010 4:25 pm

I'm not sure about the caps, I will have to remember to have a search about... Anyone know where I might get some. I didnt manage to get down to that garage yesterday as my mate didnt have the cash to sort his exhaust out, when im down there I will pop in and ask him for some parts for you.