Turning my shed of a 316i into something more 'classy'

Show off your pride and joy here

Moderator: martauto

svenga
E30 Zone Regular
E30 Zone Regular
Posts: 467
Joined: Tue Mar 02, 2010 11:00 pm
Location: n.east/n.yorkshire

Post Wed Mar 10, 2010 7:09 pm

Evening everyone,

Basically i decided to start this thread to show my progress over the next few months of the 'changes' my e30 316i will undergo..

Ok, so its not going to be a supa dupa thunderous turbo show machine. But it will be a vast improvement from its current 'shekky' state.

As it stands, completely standard minus my window vinyls, jvc cd/dvd head unit, dvx amp, jvc 6x9's, 10 + 12'' sub.

Hopefully arriving in the next few weeks are..

Colour coded bumpers
Colour coded mirrors
Low profile boot spoiler
Fog lights
15'' latice alloys

Hopefully in the future i will also have a front splitter, shadow kit, cross bar, and a fiddle under the bonnet :wink: im also considering spraying the grill all black or white.

Below are a few images of her as she stands, she may only be a baby 1.6 but she is in fab condition and my pride :D

Watch this space to see the improvements.

Thanks for looking.

Image

Image

Image

Image

Image
DaveyB
E30 Zone Regular
E30 Zone Regular
Posts: 399
Joined: Wed Oct 07, 2009 11:00 pm

Post Wed Mar 10, 2010 10:24 pm

my project is the same!

316 - was a m10 8v carb - now an m42 is lump
Image
Wanted Nothing atm :)!
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Wed Mar 10, 2010 10:52 pm

i will have to organise another meet at teesside park too give you a few tips

not a fan of the rear shelf but other mods sound good, will look so much better with some 15" BBS and all colour coded bumpers/wing mirrors fitted :)

looks way better than that chav scrap with blue lights :D
svenga
E30 Zone Regular
E30 Zone Regular
Posts: 467
Joined: Tue Mar 02, 2010 11:00 pm
Location: n.east/n.yorkshire

Post Wed Mar 10, 2010 11:07 pm

Agreed Alex, the fact its a bmw just owns them common motors.. But if thats what friends insist on driving let them get on with it (they are the ones moaning every week when there gearboxes drop out, body kits fall off)

I kept the audio gear so it can be easily removed if i ever came to sell her on as i intended (not anymore) simply so i could replace the cassete headunit and jvc small speakers.

Good plan Alex, just give it a few more weeks while she gets sorted :wink:

MOT next week so fingers crossed, everything seems fine just need to fill a small hole in the exhaust (getting a new back box in a few weeks) and the smashed indicater lense which is held together with sellotape, glue.. and coloured with orange highlighter :roll: but will have a new one in my new bumpers.
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Wed Mar 10, 2010 11:09 pm

:thumb: good luck with MOT :D
svenga
E30 Zone Regular
E30 Zone Regular
Posts: 467
Joined: Tue Mar 02, 2010 11:00 pm
Location: n.east/n.yorkshire

Post Mon Mar 15, 2010 5:14 pm

MOT this week, filled the small hole on the exhaust with heat proof silicone & a small alluminium plate just to get her through. Then a new system will be added next month.

Decided on these alloys in the end after haggling..

16''

Image

Should arrive tomorrow or wednsday hopefully, as for the other bits another week to wait. Then all going well i will spend a day fitting everything, Everything is slowly coming together now.

I have also decided to spray the front grill black (to cover the chrome, i was thinking about white but not sure now)
svenga
E30 Zone Regular
E30 Zone Regular
Posts: 467
Joined: Tue Mar 02, 2010 11:00 pm
Location: n.east/n.yorkshire

Post Sat Mar 20, 2010 4:08 pm

Alloys arrived on Tuesday, all in good condition apart from blistering, and some slight scuffs on a tire.

Spent today prepping the alloys, All morning scrubbing them down, and all this afternoon scraping and sanding ready for the first coat of primer.

I am going to wait for the weather to pick up before spraying them, so this gives me some more time to decide on a final colour. the choices are alloy silver, black, or white, what do you think? :? :mad:

The rest of the parts should be with me on tuesday and weather permitting i should be adding pieces each night :D .

MOT on monday + oil & filter service :eek:

Image
User avatar
bigredbmw
Zone Supporter
Posts: 1197
Joined: Tue Aug 05, 2008 11:00 pm
Location: newcastle upon tyne , howdon

Post Sat Mar 20, 2010 6:07 pm

looks canny but imo i would move the amp and put it in the boot
Image
svenga
E30 Zone Regular
E30 Zone Regular
Posts: 467
Joined: Tue Mar 02, 2010 11:00 pm
Location: n.east/n.yorkshire

Post Mon Mar 22, 2010 5:18 pm

She passed her MOT today with flying colours, just a bracket was welded onto the exhaust.

Alloys are now sat in primer ready to be re-sprayed and fitted saturday after i clean & paint the hubs

Sprayed the kidney grills black aswell.

MOT out of the way, tax payed.. everything fitted this week.. going to be a good summer!

Should have pictures very soon.
svenga
E30 Zone Regular
E30 Zone Regular
Posts: 467
Joined: Tue Mar 02, 2010 11:00 pm
Location: n.east/n.yorkshire

Post Tue Mar 23, 2010 5:38 pm

Something nice arrived today, all of the parts from Hannah (Dobbie)

Judging by the weather i think i will have to spend the entire saturday tinkering.

Image
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Tue Mar 23, 2010 5:41 pm

:thumb: just what it needs

glad your not chavving it up too much like them takky corsas :D

you need to ditch that silly parcel shelf ICE install though :D :D
User avatar
andrew320i
E30 Zone Regular
E30 Zone Regular
Posts: 649
Joined: Thu Jul 07, 2005 11:00 pm

Post Tue Mar 23, 2010 7:03 pm

Alex wrote:you need to ditch that silly parcel shelf ICE install though :D :D
Agreed! Keep up the good work 8)
svenga
E30 Zone Regular
E30 Zone Regular
Posts: 467
Joined: Tue Mar 02, 2010 11:00 pm
Location: n.east/n.yorkshire

Post Tue Mar 23, 2010 11:19 pm

I will Alex dont worry,

Something has arisen however..

The only other e30 in town (same colour, 5 door, 320i)

I left a note on the window if they would ever consider selling to contact.. and so the owner has, her husband past away last july and she is interested in finnally getting rid, has a few small problems but runs 'sweet' and we are discussing further tommorrow...

Could this mean all of the colour coded bits being fitted to a 320i instead.. who knows.. but i hope so :o
User avatar
andrew320i
E30 Zone Regular
E30 Zone Regular
Posts: 649
Joined: Thu Jul 07, 2005 11:00 pm

Post Tue Mar 23, 2010 11:29 pm

Im sure you will be much happier with a 6 pot! 8)
Keep us posted.
Falkster
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5787
Joined: Fri Sep 30, 2005 11:00 pm
Location: Yorkshire

Post Tue Mar 23, 2010 11:37 pm

Good work, those alloys look like they're gonna be a snug fit.
Image
svenga
E30 Zone Regular
E30 Zone Regular
Posts: 467
Joined: Tue Mar 02, 2010 11:00 pm
Location: n.east/n.yorkshire

Post Fri Mar 26, 2010 7:23 pm

The 320i looks out of the question.. needs the following to pass an MOT..

New arm
New windscreen
3 new brake pipes
Anti roll bar

One window does not work, there is rust on sunroof and under bonnet, the drivers side lock is falling out, rev counter does not work, temprature gauge shorting, few other little bits..

She wants £400 as it is..

Maybe worth it for the wing, exhaust, Alloys, clear lenses, and anything else i can scrounge then sell her on? or should i save the hastle and give it a miss?

Anyway attached below is an image of her.

Back to mine, fitted the wingmirrors, and added the new badge...
Tonight i managed with the light i had left to fit the rear bumper (was a right pain to line up but managed in the end) and... rather than paying money for a shadow kit, i made my own using electricians tape & a scalpel until i have funds 8O 8)

Also attached is a picture of my babe :D excuse the dirt.. naff wheels.. broken lense.. and lack of coloiur coded bumper and foggys.

Busy day tomorrow fitting the rest :D

Image



Image

Image
User avatar
andrew320i
E30 Zone Regular
E30 Zone Regular
Posts: 649
Joined: Thu Jul 07, 2005 11:00 pm

Post Sat Mar 27, 2010 12:29 am

£400 sounds ok but if I was in your shoes I would use that £400 to put a 325i lump in your car as its a 2dr white e30 & buy a set of alloys! 8)
svenga
E30 Zone Regular
E30 Zone Regular
Posts: 467
Joined: Tue Mar 02, 2010 11:00 pm
Location: n.east/n.yorkshire

Post Sat Mar 27, 2010 12:34 am

Got the alloys if you look above Andrew.. haha :?

Spraying them tomorrow if the weathers right!

Thing is about upgrading my girl.. she is my only one.. would be hard to take her off the road.. i would need that lump in over night!
svenga
E30 Zone Regular
E30 Zone Regular
Posts: 467
Joined: Tue Mar 02, 2010 11:00 pm
Location: n.east/n.yorkshire

Post Sat Mar 27, 2010 4:48 pm

Been a long day, but atleast the weather held back and the sun was out..

Everything fitted, and washed..

Whatya think?

Image

Image

Image

Image

Image

Whats next im thinking :? :roll: halo loghts.. lowered.. leather interior.. 2.5 lump :twisted:
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Sat Mar 27, 2010 8:51 pm

Remove the takky Mtech badge, no council headlights, lower yes, leather interior yes and 2.5 but doubt you can afford insurance for a 316i with non standard engine, you should be able to insure a 325i though if you have 2 yrs no claims :)
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Sat Mar 27, 2010 9:06 pm

looks much better get some bbs and an interior and it's there apart from the engine
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
VeinAST
E30 Zone Regular
E30 Zone Regular
Posts: 461
Joined: Sun May 10, 2009 11:00 pm
Location: Wiltshire

Post Sat Mar 27, 2010 9:37 pm

Definitely a 60mm drop
Image
Ollie_bwoii
Married to the E30 Zone
Married to the E30 Zone
Posts: 8695
Joined: Sat May 17, 2008 11:00 pm
Location: Northampton

Post Sat Mar 27, 2010 9:42 pm

Looks a nice E30, but sorry to say the alloys and M badge ruin it. Get some BBS on there.
Green
E30 Zone Squatter
E30 Zone Squatter
Posts: 1698
Joined: Wed Mar 17, 2010 11:00 pm
Location: Santa Pod

Post Sat Mar 27, 2010 9:54 pm

Looking good mate, lowering if a must i know i'm eager to get mine done!
Plans sound alright but i wouldn't agree with them all but each to their own, you're making it your own car after all :)
svenga
E30 Zone Regular
E30 Zone Regular
Posts: 467
Joined: Tue Mar 02, 2010 11:00 pm
Location: n.east/n.yorkshire

Post Sat Mar 27, 2010 11:25 pm

Best to be unique.. and i cant afford them deep dish BBS's as much as i would like..

Lowering is a must!

My mtech badge 8O i like it haha, just like the logo in general!

I have three yearsn Alex so could probably get insured, however think i will keep her until i am 21 and get something like a e30 sport.
svenga
E30 Zone Regular
E30 Zone Regular
Posts: 467
Joined: Tue Mar 02, 2010 11:00 pm
Location: n.east/n.yorkshire

Post Mon Mar 29, 2010 5:27 pm

Well, things took a turn for the worse..

Those 'alloys' no one likes.. i now no longer like! :x seems all four have slow punctures..

i have been given a £30 refund from the seller to fix the punctures :roll:

Screw that!

Heres my new plan..

Say hello to my second bmw e30.. mr 320i

Getting her delivered sometime this week, as explained above it is not going to be running in my ownership (cant afford it) i will be stealing the wing, lenses, exhaust, alloys, and any other bits i can lay my hands on.. then selling her on as spares or repair with my alloys on!

i may consider putting the engine in mine, but i think the insurance will have other ideas :(
Image

Image

Image
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Mon Mar 29, 2010 5:57 pm

Haha you have the e30 bug :chuckle:

pointless putting a 320i engine into a 316i the 320i engine isnt much faster than a 318i and has a bigger drink problem than the 325i

looks like a clean enough shell though
Ollie_bwoii
Married to the E30 Zone
Married to the E30 Zone
Posts: 8695
Joined: Sat May 17, 2008 11:00 pm
Location: Northampton

Post Mon Mar 29, 2010 6:03 pm

svenga wrote:Best to be unique.. and i cant afford them deep dish BBS's as much as i would like..
Just get some E30 15" BBS, you should pic up a half decent set for £100-£120.

Erm............Nice exhaust on the 320i. :eek:
svenga
E30 Zone Regular
E30 Zone Regular
Posts: 467
Joined: Tue Mar 02, 2010 11:00 pm
Location: n.east/n.yorkshire

Post Mon Mar 29, 2010 6:55 pm

The car will be coming with the BBS's it had from new as well as these alloys that are on her.

I have Alex, its in my veins now 8O

The shell is 65-70% solid, there is little blobs of rust all over to be honest, mine is a minter compared to it, infact it has made me appreciate mine more!

Ollie, the exhaust (and the solid wing, alloys and extras) is what sold it! she passed me the keys and said start it so i can see your face, i was like a child in a toy store... the noise was just.. unreal! not to chavvy.. not too loud.. just rumbly and mean :-x a big grin was shown

Think i might twock them mudflaps and slap em on mine too.. even if you lot say it looks naff!

Got a whole bank holiday ahead of me now to do as much as possible (if not everything)
svenga
E30 Zone Regular
E30 Zone Regular
Posts: 467
Joined: Tue Mar 02, 2010 11:00 pm
Location: n.east/n.yorkshire

Post Fri Apr 02, 2010 10:59 pm

New bimmer is home and ready for stripping tomorrow,

Its a shame i cant keep it, its rough & ready :-x

More updates tomorrow :P

Image
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Fri Apr 02, 2010 11:00 pm

are you breaking it then???
svenga
E30 Zone Regular
E30 Zone Regular
Posts: 467
Joined: Tue Mar 02, 2010 11:00 pm
Location: n.east/n.yorkshire

Post Fri Apr 02, 2010 11:06 pm

Taking everything i need Alex, And most probably selling her on as spares or repair depending on what happens.
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Fri Apr 02, 2010 11:07 pm

if your breaking there might be a couple of things i would be interested in

bonnet, possibly front valance, shagging blind etc :)
svenga
E30 Zone Regular
E30 Zone Regular
Posts: 467
Joined: Tue Mar 02, 2010 11:00 pm
Location: n.east/n.yorkshire

Post Fri Apr 02, 2010 11:09 pm

Haha will keep you updated Alex, never did see the point on them blinds until now 8O

Why the valice may i ask? alter/custom it?
dobbie82
E30 Zone Addict
E30 Zone Addict
Posts: 4125
Joined: Thu May 05, 2005 11:00 pm
Location: Dolgellau, Wales (NOT A TRADER,broken a car,got lots of bits)

Post Mon Apr 05, 2010 8:04 pm

Looking good :cool: Really strange seeing the parts off my car on another. I have only ever been sentimental about two cars and this was one of them.

And I agree with everyone else, you should have bought my BBS too haha Seriously though I think they look ok, different without being tacky halfords wheels.
e30 related ebay auctions + shop(MY Stuff for Sale), http://tinyurl.com/64aufr
My Feedback on the e30zone: http://tinyurl.com/dobbie82feedback