If I used a M50 engine in an E36 328i, what missions am I looking at when it comes down to wiring harness and ECU etc.
The E36 has got a good gearbox and clutch but the engine is blown so I am planning to use a M50 I have kicking about.
Any help would be great.
M52 to M50 swap - ECU Difference
Moderator: martauto
-
jimmymig
- E30 Zone Newbie
- Posts: 135
- Joined: Thu Jul 24, 2008 11:00 pm
- Location: Swindon
you will need engine harness and ecu too match.my bro has chipped ecu if u need one.goodluck 
-
Dave_M3
- E30 Zone Addict
- Posts: 3428
- Joined: Sat Jun 24, 2006 11:00 pm
- Location: Cork
Your going the wrong way!!!
S50 is the only way forward from a blown M52
S50 is the only way forward from a blown M52
M42 rightness above 6500rpm, nobody can hear you scream