Tech 2 Touring (Refurbed OZ Wheels Fitted)

Show off your pride and joy here

Moderator: martauto

Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Fri Feb 12, 2010 9:21 pm

Ok so it is acutally a Tech II kitted touring but for the past 6 months is been sat round the back of my house being used as a shed to store loads of my E30 tat.

However a couple of weeks ago i was getting the itch to get in an E30 again so stuck it through an MOT and with no pre test checks it just failed on a small hole in the sill, not bad since it hadn't even been started since August.

After all that time sitting out unloved paint faid was a slight issue so as it was decent weather yesterday and i got away from work early i gave the old girl her first clean and polish, far from perfect though despite now resembling red. The paint is covered in horrific swirl marks so any of you car cleaning gurus with any tips of removing these i'd appreciate them.
Image
Image
Image
Image
Image
Image
Image
Image
Image

Despite looking reasonable in the pics it is a tatty old car, originally bought as breaker but just not got round to it yet, used to be a 318i Auto but has had all the running gear from a Sport fitted. No interior pics though as thats a mess, rear is stripped out and i'd already sold the Sport leathers so have had to chuck in my manky houndstooth recaros for the time being.

Also has this manifold fitted but i'm still not sure what make it is, been told it could be magnex one but some other companies also apparently made similar ones, anyone got any ideas?
Image

Plans for the time being are just to run it for a bit of fun to take some mileage of the daily driver and tidy a few little bits up on it until my chromie is eventually road worthy. :)
Last edited by Kedge on Mon Mar 08, 2010 9:11 pm, edited 2 times in total.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
User avatar
blackE30indy
E30 Zone Camper
E30 Zone Camper
Posts: 1285
Joined: Sun Mar 30, 2008 11:00 pm
Location: leicester/uk

Post Fri Feb 12, 2010 9:47 pm

You gona bring this 1 to the midlands meet,looks tidy enough
Indy :D
Ollie_bwoii
Married to the E30 Zone
Married to the E30 Zone
Posts: 8695
Joined: Sat May 17, 2008 11:00 pm
Location: Northampton

Post Fri Feb 12, 2010 9:50 pm

Looks fairly tidy in the pictures. I hope it won't turn out to be a shocking turd.......

Needs a rear spoiler for the tailgate imo.
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Fri Feb 12, 2010 10:04 pm

Yea will be in this Indy.

Ollie if it was a shocking turd it wouldn't have got through the MOT that easily :P

I've had a wanted add for a spoiler going for a week or so, the previous owner kept the M-Tech spoiler to try and make some money back on the car :(
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
FMH
E30 Zone Addict
E30 Zone Addict
Posts: 3213
Joined: Tue Jun 02, 2009 11:00 pm
Location: Birmingham

Post Fri Feb 12, 2010 10:31 pm

Tech 2 tourings look cool.

Some bigger/better wheels and lowering to suit is the only changes i'd make.
BBS splits :cool:
Daz87UK
E30 Zone Newbie
E30 Zone Newbie
Posts: 133
Joined: Thu Jan 28, 2010 11:00 pm

Post Fri Feb 12, 2010 10:36 pm

i'm a valeter with MotorClean, removing swirl marks:

get down to your nearest shop and dig out some G1 Rubbing Compound and some AutoGlym Paint Renovater & do the following with both.

Rub (using a sponge, not a cloth) in the G1 in straight lines with adequate pressure NOT in circular motions. This will then remove ya swirlies, then do the same with the PR and it will make it Red and shiny, i'm doing this to my Zinnober Pink e30 tomorrow on my lunch and will post up a pic to show you the score, this is the best combination of tools and use to make a pinky a reddy.

anyway, enough of the chattin crap, NICE CAR! look after it
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Sat Feb 13, 2010 12:00 am

It was lowered when i first got it, but was too low and drove like a sack of shit,
Image

Just put standard springs on the rear, front is still as it was and i guess it's sitting even higher now there'e no weight in the back.

I may stick the OZ back on or if i can be bothered take the Hartges off the chromie for a while.

Cheers for the advice Daz, better cross my fingers for some decent weather to have a crack at that, look forward to some before and after shots of yours.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Duke137
Married to the E30 Zone
Married to the E30 Zone
Posts: 7207
Joined: Sat Aug 29, 2009 11:00 pm

Post Sat Feb 13, 2010 12:09 am

Don't break that tourer mate its pretty cool I think :D
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
billgatese30
E30 Zone Team Member
E30 Zone Team Member
Posts: 10989
Joined: Sun Jan 09, 2005 11:00 pm
Location: Tyne & Wear

Post Sat Feb 13, 2010 12:44 am

Dave, what did you do with the zinnobar "Davenotsotouring" touring that you had....I thought you still had it?
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Sat Feb 13, 2010 12:50 am

Looking at those pics, I thought it was the same Tourer housing the s38 i saw last year at DC09 and Pod too.
Oh it does need some BBS splitties though winkeye
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
User avatar
gooner1
Out humping Reindeer
Posts: 13280
Joined: Fri Apr 14, 2006 11:00 pm
Location: Northampton.For my sins.

Post Sat Feb 13, 2010 7:19 pm

Think the Tints ,on the rear windows, spoil the look Dave.
Other than that, it looks fine.
Image
Ollie_bwoii
Married to the E30 Zone
Married to the E30 Zone
Posts: 8695
Joined: Sat May 17, 2008 11:00 pm
Location: Northampton

Post Sat Feb 13, 2010 7:26 pm

Oh Wow, those OZ wheels are stunning. :drool: And would look fantastic on a chromie like yours.

I washed my car to help make a list of what needs doing to make it 'presentable' for the Mids meet, and its a lot shorter than I originally thought. 8)
User avatar
gooner1
Out humping Reindeer
Posts: 13280
Joined: Fri Apr 14, 2006 11:00 pm
Location: Northampton.For my sins.

Post Sat Feb 13, 2010 7:36 pm

Ollie_bwoii wrote:Oh Wow, those OZ wheels are stunning. :drool: And would look fantastic on a chromie like yours.

I washed my car to help make a list of what needs doing to make it 'presentable' for the Mids meet, and its a lot shorter than I originally thought. 8)
Knew that Shorthand course would come in handy, Ollie, :wink:
Image
Ollie_bwoii
Married to the E30 Zone
Married to the E30 Zone
Posts: 8695
Joined: Sat May 17, 2008 11:00 pm
Location: Northampton

Post Sat Feb 13, 2010 7:37 pm

:rofl: Very funny Rob.

It's not that bad is it...... :cry:
User avatar
gooner1
Out humping Reindeer
Posts: 13280
Joined: Fri Apr 14, 2006 11:00 pm
Location: Northampton.For my sins.

Post Sat Feb 13, 2010 7:40 pm

Ollie_bwoii wrote::rofl: Very funny Rob.

It's not that bad is it...... :cry:
Not at all mate, not at all. 8)
Image
Ollie_bwoii
Married to the E30 Zone
Married to the E30 Zone
Posts: 8695
Joined: Sat May 17, 2008 11:00 pm
Location: Northampton

Post Sat Feb 13, 2010 7:48 pm

Ah good, just a certiain part of the car in need of work, AGAIN. :roll:
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Sat Feb 13, 2010 7:54 pm

nice shed,just needs "GALVANISED"!
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Sun Feb 14, 2010 8:17 pm

Chris, Dave old Touring is long gone, think i sold it about 3 1/2 years ago. Some lad bought it from Birmingham, promptly put a rod through the block, dropped another engine and tried to sell it on a few months later on here using the same pics. I know it didn't sell on here but no idea what happened to it in the end.

Rav, i wish it was running an S38. If your generous enough to donate some splitties i don't mind letting some nestle under the arches :P


Rob, i know the tints are pure council but they give the thing excellent shed qualities keeping prying eyes away :)

Ollie, surely you've seen a pic of the OZs before, they're looking a hell of a lot better now winkeye

Anyone got any ideas on the manifold? :)
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Sun Feb 14, 2010 9:08 pm

Kedge wrote:
Rav, i wish it was running an S38. If your generous enough to donate some splitties i don't mind letting some nestle under the arches :P
:)
No probs dave, if you donate the money :mad: i'll kindly donate the Splitties :mad:
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Sat Feb 20, 2010 4:26 pm

Had some time to kill this morning so had a play with making the touring look a little French :)
Image

Paint is starting to fade again already, now i remember why i'd had enough of red cars after the iS went :roll:
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
schnaarf
E30 Zone Camper
E30 Zone Camper
Posts: 1076
Joined: Sun Jun 24, 2007 11:00 pm

Post Sat Feb 20, 2010 5:23 pm

Kedge wrote:It was lowered when i first got it, but was too low and drove like a sack of shit,
Image
I like those wheels! Don't still have them do you?

EDIT - just read you post properly
Baz666
E30 Zone Addict
E30 Zone Addict
Posts: 3516
Joined: Fri Feb 29, 2008 11:00 pm
Location: Ipswich, Suffolk

Post Sat Feb 20, 2010 6:45 pm

Looks good buddy :cool: what did you use on the lights
Image
E46 328ci, sport bumpers, 19" style 95`s
E30BeemerLad
Married to the E30 Zone
Married to the E30 Zone
Posts: 16806
Joined: Mon Mar 28, 2005 11:00 pm
Location: Norfolk

Post Sat Feb 20, 2010 10:52 pm

Dave, if you ever want to move those wheels on..... 8)
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Sat Feb 20, 2010 11:23 pm

Still got the wheels chaps, look a little different now though :wink: , just need some decent center caps making instead of the crappy chromed plastic ones.

I used Lamin-X Baz, not bad for a first attempt but could have done a bit better job as i trimed a touch too much off on the outer lamps, dead easy to do apply!
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
User avatar
BMJG
E30 Zone Regular
E30 Zone Regular
Posts: 808
Joined: Wed Oct 31, 2007 11:00 pm
Location: andover,hampshire

Post Sun Feb 21, 2010 9:28 am

I got some smoked do you make it a little bigger than required and heat edges etc :?:
Baz666
E30 Zone Addict
E30 Zone Addict
Posts: 3516
Joined: Fri Feb 29, 2008 11:00 pm
Location: Ipswich, Suffolk

Post Sun Feb 21, 2010 9:54 am

Image
E46 328ci, sport bumpers, 19" style 95`s
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Sun Feb 21, 2010 10:17 am

BMJG wrote:I got some smoked do you make it a little bigger than required and heat edges etc :?:
I cut the film into 6x6" squares, stuck into down on the faces of the lights then trimmed off the excess and then used a heat gun to soften up the edges to work it round the edges, just make sure you leave a bit extra on the outer lamps :D
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Baz666
E30 Zone Addict
E30 Zone Addict
Posts: 3516
Joined: Fri Feb 29, 2008 11:00 pm
Location: Ipswich, Suffolk

Post Sun Feb 21, 2010 10:27 am

Dave where did you get your sheet from....ebay
Image
E46 328ci, sport bumpers, 19" style 95`s
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Sun Feb 21, 2010 3:07 pm

Here you go Baz,

http://www.e30zone.net/modules.php?name ... c&t=118300

Just buy it in what ever size sheet you need with a nice 10% discount.

Never even looked on Ebay so don't know how much it can be had off there.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Sat Mar 06, 2010 6:17 pm

Got round to putting the OZs back on the touring today, here's the results;
Image
Image
Image
Image
Image
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Mon Mar 08, 2010 9:27 pm

Couple of pics from the Mids meet yesterday;
Image
Image

Couple of some snow action from a couple of weeks ago;
Image
Image
Image
Image
Image
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85