Hartge 16" Centre Caps

[inlovewithRWD]

I've recently bought a set of Hartge 16" wheels and I'm lookinjg to buy new centre caps. I have contacted Hartge in Germany and they need the serial number of the caps to process the order. I have some caps but they have told me that they don't match the wheels .

Could someone with Hartge wheels please tell me the serial number of their caps? There should be an 8 digit number which apparently begins with 36...

Any help appreciated!

[HartgeH27]

Centre cap numbers on 16" wheels are:

76077 Ronal H0562

[inlovewithRWD]

That is the number I gave her and apparently it isn't right...

Is the serial number for your 16" Hartges H6754031?

[Cook318IS]

Centre cap numbers on 16" wheels are:

76077 Ronal H0562

And only 3 sets left in germany before they go NLA. sit down when you get a quote

Edit: does the wheel have a thread in the wheel behind where the centre cap goes?

[inlovewithRWD]

They gave me a quote before and it didn't seem too bad, unless they have changed the price...

[Cook318IS]

Convert it to £'s and it gets expensive

[inlovewithRWD]

But £ is stronger than € (just). How can it get more expensive?

[Cook318IS]

Edit: does the wheel have a thread in the wheel behind where the centre cap goes?

^
Did you see that bit?

But £ is stronger than € (just). How can it get more expensive?

I ordered some last month. I wouldn't consider over £200 cheap for centrecaps

[inlovewithRWD]

I know what you mean: they are expensive for what they are...

They don't have a thread behind.

[inlovewithRWD]

Well I was very lucky and managed to buy one of the last sets of Hartge centre caps from Hartge Germany . They really weren't cheap but they'll really set the wheels off nicely once refurbed.

Thanks for all the advice and help! As soon as I have photos of them fitted to the car I'll post them up.

[mick_318is]

Does anyone have any damaged centre caps they don't need anymore?

2 of my 4 have broken tabs on the back ( those of you with Hartges know what I am talking about)

I am looking at an alternate method of attaching them once the tabs are broken, However I don't want to "modify" one of mine before I know it works.

Mick

[StuBeeDoo]

I am looking at an alternate method of attaching them once the tabs are broken

Small blob of silicon sealer.
Just enough to hold them in place, but not enough to stop them coming off when you want them to.