Calypso Project Part 2(now with V8 inside)...UPDATE-02/02/10
Moderator: martauto
-
si-
- E30 Zone Regular

- Posts: 445
- Joined: Mon Jul 07, 2008 11:00 pm
- Location: Ware, Herts
cheers jon, im keeping my eye out for a cheap 530 manual, ill use it as a daily till im ready to do the swap
e30.de is good very helpful site that
what mounts of you guys all used???
e30.de is good very helpful site that
what mounts of you guys all used???
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
It is wider, hence the need to run e36 offset wheels..FMH wrote:When you using the e30/e36 mix and match parts on the front, it just helps to re-centre the wheel, the track is the same as a normal e30 set up, its not any wider.bss325i wrote:I know they are wider than the standard E30 suff but are thy wider than the hybrid combo of E30/E36 parts Shaz has used?FMH wrote: Nope, rears are 12mm wider.
So yes, the rears are still 12mm wider.
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
Completely right.. I've held them up against each otherSHAZ325iSPORT wrote:look the same,but 100% definately a differnece,reason i say this is because i changed from standard to evo and there was a difference
-
Kos
- E30 Zone Team Member

- Posts: 15448
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
too right, they must be on youtube some whereoze30 wrote:
Need to find the vid of Aces... Eh Kos? ;)
-
FormerMember
- E30 Zone Regular

- Posts: 848
- Joined: Sun Jul 24, 2005 11:00 pm
- Location: Global
Thee options basically;si- wrote:what mounts of you guys all used???
-Use standard mounts and weld supports to frame rails.
-Buy mounts from www.300mm.de and use 540 rubber mounts & stock E30 mounting position on subframe. This is what i use.
-Fabricate your own mounts and use standard E30 mounting positions on subframe.
E30 Cabrio M-Tech, powered by V8
E34 M5 3.8 x 2
Alpina D10 Touring #33/93
E46 318i Touring
Toyota Hiace 4wd
E34 M5 3.8 x 2
Alpina D10 Touring #33/93
E46 318i Touring
Toyota Hiace 4wd
-
si-
- E30 Zone Regular

- Posts: 445
- Joined: Mon Jul 07, 2008 11:00 pm
- Location: Ware, Herts
i think its going to be fab ( read- get someone to make them!!!) my own mount's..........
does anyone have any dimension's etc of the mounts?
does anyone have any dimension's etc of the mounts?
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
Si- For the grief it is making them up, just fork out for the proper mounts. Unless you have access to a hoist or like fitting and removing engines often.
-
Jean
- E30 Zone Newbie

- Posts: 100
- Joined: Mon Feb 08, 2010 11:00 pm
- Location: California
Nice swap! How much room is there behind the engine/ near firewall?
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
Enough to get a hand down there but that's about it!Jean wrote:Nice swap! How much room is there behind the engine/ near firewall?
-
si-
- E30 Zone Regular

- Posts: 445
- Joined: Mon Jul 07, 2008 11:00 pm
- Location: Ware, Herts
hoist is no problem the cost of the mounts off the shelf is....... 300mm.de works out at about 900 quid form what i can gather!!!!oze30 wrote:Si- For the grief it is making them up, just fork out for the proper mounts. Unless you have access to a hoist or like fitting and removing engines often.
jonsku - have you got any pictures of your mounts or have any of the option's you detailed above, im having trouble navigating and finding what i want on e30de my lack of german and google's literal translation confuses me which aint to hard
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
I meant 2/4 post hoist. You'll need to get under there and tack stuff together. Exhaust wise, it's damn tight in there and you'll need some modifying of original manifolds (not pretty) or get an exhaust shop to fab it up. Just make sure you get new gaskets as it's a pain (read almost imposible) to get to the manifold bolts once it's in.
-
glenn
- Engine Transplant Services

- Posts: 2196
- Joined: Sat Jan 29, 2005 11:00 pm
- Location: blackwood, south wales
here you go.....here's mine.si- wrote:
hoist is no problem the cost of the mounts off the shelf is....... 300mm.de works out at about 900 quid form what i can gather!!!!
jonsku - have you got any pictures of your mounts or have any of the option's you detailed above, im having trouble navigating and finding what i want on e30de my lack of german and google's literal translation confuses me which aint to hard![]()



-
si-
- E30 Zone Regular

- Posts: 445
- Joined: Mon Jul 07, 2008 11:00 pm
- Location: Ware, Herts
wicked thanks glenn, did you just make the mounts up and use the standard e30 rubber's on the crossmember??
-
FMH
- E30 Zone Addict

- Posts: 3213
- Joined: Tue Jun 02, 2009 11:00 pm
- Location: Birmingham
Shaz, what drop did you have on the car when the style 5's were fitted?
-
FMH
- E30 Zone Addict

- Posts: 3213
- Joined: Tue Jun 02, 2009 11:00 pm
- Location: Birmingham
Oh, and when you put the style 5's back together, what torque did you set the nuts/bolts at?

