318is chips

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
bimmer_add
E30 Zone Newbie
E30 Zone Newbie
Posts: 12
Joined: Fri Nov 16, 2007 11:00 pm
Location: Winchester

Sat Jan 16, 2010 5:44 pm

Has anyone got any experience of chipping the ECU in their 318is? Have seen a posting advertising chips for M20 engines with good reports from zoners for £25, does anyone know of similar chips for the M42 engine?

I have done some research on the internet and the best I can find are American and on ebay, they cost upwards of $50 and have no feed back as to performance.
Bob_S
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5412
Joined: Sat Jun 11, 2005 11:00 pm
Location: chester, cheshire

Sat Jan 16, 2010 5:57 pm

no great advantages to be had from a chip on these motors
Bollocks to this 24v scrap!
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Sat Jan 16, 2010 6:04 pm

i have one from evolve,
i think speedtouch on here sells is ones now.

the chip may give a bit better mpg and the rev limiter is lifted from 6.5krpm to 7.5krpm.

that's about it
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
DHFiS
Old Skooler
Old Skooler
Posts: 2733
Joined: Sat Aug 12, 2006 11:00 pm
Location: cambridge

Sat Jan 16, 2010 6:15 pm

I got one from Evolve. Here is the dyno plot

http://img685.imageshack.us/img685/706/image001v.jpg

Still makes 136bhp but revs to 6750rpm.
User avatar
chrisE318is
E30 Zone Newbie
E30 Zone Newbie
Posts: 149
Joined: Mon Jan 12, 2009 11:00 pm

Sat Jan 16, 2010 7:06 pm

mine seemed to make alot of difference after i chipped it, unless you but from evolve and speedtouch its hard to get a chip to suit the i.s though as theres 3 types of firm ware and its luck of the draw which 1 you have.
breaking 2 door dolphin grey tec 2
pm me
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Sat Jan 16, 2010 7:14 pm

i'm at a rolling road meet tommorow.

i'm not expecting miracles but we'll soon see if i have more than 136 ponies alive 8)
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
User avatar
Brian28
E30 Zone Squatter
E30 Zone Squatter
Posts: 1596
Joined: Sat Jun 11, 2005 11:00 pm
Location: Bournemouth
Contact:

Sat Jan 16, 2010 7:48 pm

Good luck tomorrow :wink: . Anybody have contact details/website link for Evolve? I want one of their 318is chips but don't know how to get hold of them.

Thanks
Brian
For sale - E30 320i racer project - sold.
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Sat Jan 16, 2010 7:55 pm

here you go brian,phone them up on monday.
i remember i had to give the ecu code and also the standard chip code from the back of the chip.
:)



http://evolveyourcar.com/default.asp
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
User avatar
Brian28
E30 Zone Squatter
E30 Zone Squatter
Posts: 1596
Joined: Sat Jun 11, 2005 11:00 pm
Location: Bournemouth
Contact:

Sat Jan 16, 2010 7:58 pm

Good man thanks :thumb:
For sale - E30 320i racer project - sold.
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Sat Jan 16, 2010 7:59 pm

the best to do is to get a lightened m20 flywheel and a suited sachs clutch with the longer thrust bearing shaft :D


the chip does help but i only had my car a week before i chipped it so i can't remember much what it was like pre chip.
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22666
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Sat Jan 16, 2010 8:26 pm

Mine chipped well, certainly a lot more punch, and @ BOB yes still slow :D

chip cost £30 off ebay.

shame you have lightened flywheel Magpie otherwise we could have had a chip challange tomorrow Morining :roll:
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Sat Jan 16, 2010 8:31 pm

the fly gives no bhp advantage.

game on dude winkeye
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22666
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Sat Jan 16, 2010 8:33 pm

winkeye winkeye your on
Daf318is
E30 Zone Camper
E30 Zone Camper
Posts: 1260
Joined: Mon Jul 30, 2007 11:00 pm
Location: North Wales (Denbighshire)

Sat Jan 16, 2010 9:00 pm

I found the best thingto do with the M42 engine is to pull it out and put and M52 in there winkeye

On a 'less' serious note I had a chip in my IS and didn't notice any difference. I have no idea where the chip came from though to be honest - it just said 'viper' on it!
Image
Now driving an E46 320D touring :(, but it get's worse..... the new project is going to be Ford powered!
asmith88
E30 Zone Addict
E30 Zone Addict
Posts: 2684
Joined: Sat Aug 23, 2008 11:00 pm
Location: Co Down, N.I

Sat Jan 16, 2010 10:39 pm

Bob_S wrote:no great advantages to be had from a chip on these motors
Bob shush.. my chip made a fairly noticeable difference, and it only cost me 30 quid on ebay..

best value for money upgrade i know of :cool:
1990 brilliant red 318 is
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22666
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Sat Jan 16, 2010 10:46 pm

asmith, did you get the same one i bought ?
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Sat Jan 16, 2010 11:43 pm

alex if the turd your getting tomorrow needs owt then let me know before i crush the 325i.
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
asmith88
E30 Zone Addict
E30 Zone Addict
Posts: 2684
Joined: Sat Aug 23, 2008 11:00 pm
Location: Co Down, N.I

Sun Jan 17, 2010 12:07 am

Yea the same as yours Alex, i think, from an american company.. Will be very interested in hearing all your rolling road results. :)
1990 brilliant red 318 is
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Sun Jan 17, 2010 3:15 pm

asmith88 wrote:Will be very interested in hearing all your rolling road results. :)
me too ! :cool:
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Sun Jan 17, 2010 4:09 pm

here's mine winkeye

Image

Image

not bad i spose :D
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
User avatar
Jozi
E30 Zone Addict
E30 Zone Addict
Posts: 3076
Joined: Thu Nov 22, 2007 11:00 pm
Location: Dublin, Ireland

Sun Jan 17, 2010 4:15 pm

That looks pretty good Magpie, just a chip and flywheel? I'd be happy with that if my car had similar figures.

I had a Viper chip in mine at the start, swapped it with the standard one for the NCT and you would notice the difference then. Around town I found myself holding onto revs just a little longer before changing gear. Felt like there was less power lower down in th rev range.

I've a evolve chip in it now that I got the lend of to try out. Can't say there's a difference between it and the Viper one. More power lower down the revs and no limiter at 6500rpm. Be nice if it improves my mpg as well, 26average around town with the viper chip :(
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Sun Jan 17, 2010 4:19 pm

there is a slight difference between the vipe and evolve but i'll let alex tell you all.

i have a k&n panel filter also.the guy said mine was "SMOOTH"

jozi you have more weight than me re mpg
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
asmith88
E30 Zone Addict
E30 Zone Addict
Posts: 2684
Joined: Sat Aug 23, 2008 11:00 pm
Location: Co Down, N.I

Sun Jan 17, 2010 4:24 pm

magpie wrote:here's mine winkeye

Image

Image

not bad i spose :D
Very good, chip does seem to make a fair difference :cool:
1990 brilliant red 318 is
User avatar
Jozi
E30 Zone Addict
E30 Zone Addict
Posts: 3076
Joined: Thu Nov 22, 2007 11:00 pm
Location: Dublin, Ireland

Sun Jan 17, 2010 4:42 pm

magpie wrote:
jozi you have more weight than me re mpg
Never thought about that as being a factor, even though it is. Another reason to be a little less unhappy :)

I've a K&N panel filter also as well as a BBTB no fancy flywheels though, not yet.
GrindCulture
E30 Zone Addict
E30 Zone Addict
Posts: 2955
Joined: Mon Mar 03, 2008 11:00 pm
Location: Exeter

Sun Jan 17, 2010 4:45 pm

What diff you using Jozi?
Not in E30s any more :(
User avatar
Jozi
E30 Zone Addict
E30 Zone Addict
Posts: 3076
Joined: Thu Nov 22, 2007 11:00 pm
Location: Dublin, Ireland

Sun Jan 17, 2010 4:49 pm

Pretty sure it s a standard 4.27 open diff that came in the touring from the factory, it's not going to help the mpg either, I got it up to nearly 34mpg with lots of motorway and little town driving.
GrindCulture
E30 Zone Addict
E30 Zone Addict
Posts: 2955
Joined: Mon Mar 03, 2008 11:00 pm
Location: Exeter

Sun Jan 17, 2010 4:56 pm

Ah, same as mine then. Although mine averages 35-38mpg weekly with mixed motorway and A-road driving and a little town driving in between. Bone stock M42 with a K&N panel and a dodgy exhaust.
Not in E30s any more :(
User avatar
Jozi
E30 Zone Addict
E30 Zone Addict
Posts: 3076
Joined: Thu Nov 22, 2007 11:00 pm
Location: Dublin, Ireland

Sun Jan 17, 2010 7:03 pm

GrindCulture, sent you a pm, stop the topic from going more of topic :)
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22666
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Sun Jan 17, 2010 7:33 pm

magpie wrote:there is a slight difference between the vipe and evolve but i'll let alex tell you all.

i have a k&n panel filter also.the guy said mine was "SMOOTH"

jozi you have more weight than me re mpg
Smoother..... :P , my power is lower down :gay: :D

When you comming to wash My Car Magpie??????

need loads mick, shells to good to scrap to be honest looks like it will be getting put back on the road, its only done 90k too


Image
Image
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Sun Jan 17, 2010 7:51 pm

so were in the 152bhp "IS" club then.


good results m8 :D

is the cab a chromie?
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22666
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Sun Jan 17, 2010 7:55 pm

magpie wrote:so were in the 152bhp "IS" club then.


good results m8 :D

is the cab a chromie?
it certainly is mick, although it did have the wrong facelift bumpers, has small lights and on a G reg so deffintly a Pre-facelift

zero rot in the usuall places, just some wierd holes in the rear valance :?

need a fuel pump, rocker cover and oil filter housing to get it fired up. will do away with the oil cooler till i know the engine is sound as they cost more

oh and 2x chrome bumper 2x wings a door, and a front valance and it will be complete ish :D
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Sun Jan 17, 2010 8:20 pm

what colour is it?

is the roof still with it?
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22666
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Sun Jan 17, 2010 8:21 pm

magpie wrote:what colour is it?

is the roof still with it?
Alpine white II, has a roof but has a massive hole in it :roll: and plenty of cuts, wierd wheels though, some sort of bbs replica things :mad:

has a shitty slush box though, will get that ripped out
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Sun Jan 17, 2010 8:32 pm

i have a pedal box, fluid res and metal bulk head clutch pipe £20?
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22666
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Sun Jan 17, 2010 8:33 pm

magpie wrote:i have a pedal box, fluid res and metal bulk head clutch pipe £20?
the manual conversion is the last thing i will do mick :)
Post Reply