It does not smell rich, the lambda sensors are not coming on the scaner. Also it does not have a middle box, its two pipes from the manifold to the back box. would fitting a middle box help?
M52 Exhaust Noise Rattle... What Is It?..Help
Moderator: martauto
-
Wilson325i
- E30 Zone Camper
- Posts: 1184
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Here in SE
Hi guys, my m52 pops/rattles in the exhaust when i press or back of the throttle (sp) i changed the back box thinking that would help, but it has not. Do you guys suffer from this? if so have you cured it and how/what did you do to it?
It does not smell rich, the lambda sensors are not coming on the scaner. Also it does not have a middle box, its two pipes from the manifold to the back box. would fitting a middle box help?
It does not smell rich, the lambda sensors are not coming on the scaner. Also it does not have a middle box, its two pipes from the manifold to the back box. would fitting a middle box help?
-
E30BeemerLad
- Married to the E30 Zone
- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
Check your lambda sensors are actually tight.
I had a metallic sound coming from mine when revving it and letting off, noticed I had forgotten to fully tighten up one of the sensors.
I had a metallic sound coming from mine when revving it and letting off, noticed I had forgotten to fully tighten up one of the sensors.
-
Wilson325i
- E30 Zone Camper
- Posts: 1184
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Here in SE
Yeah its a metalic sound, and the sensors are realy tight. i have a video of it some where on the computer.
But it seams to come from the back end of the exhaust, and it is driving me nuts. Even a little start stop in traffic it pops when you back of, when the revs start to drop down.
But it seams to come from the back end of the exhaust, and it is driving me nuts. Even a little start stop in traffic it pops when you back of, when the revs start to drop down.