Cheap Budget tyres..

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

Post Reply
SwirlyE30
E30 Zone Squatter
E30 Zone Squatter
Posts: 1509
Joined: Sun Jan 09, 2005 11:00 pm
Location: Worthing-Brighton South Coast
Contact:

Sun Aug 28, 2005 12:37 pm

Right.I know theres a tyre thread somewhere, but im just after some quick advice. Basically ive been doing so many dunots, burnouts etc latly that the inside of my tyres on the rear are fucked, from the outside they look puka


then on the inside they look like this....


Image

Image

Basically, whats gonna be the best budget rears.Im gonna do the fronts soon with some sh*t hot tyres. But i dont want it on the back. Whats gonna be the best like proppe rbudget tyres? Im running 205/55/15'

Remoulds? Or shall i go for a cheap make?




Bit less of this i think!

Image
1986 Chevrolet Corvette. 330ftlb torque....V8s rule!
smithy318i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5797
Joined: Thu Apr 28, 2005 11:00 pm
Location: Tyne & Wear

Sun Aug 28, 2005 12:42 pm

If your looking for extremely cheap tyres, go to a breakers and sort through them, then ask for a price including a changeover. it comes to about 8 quid a tyre.

Then again if you want new cheap tyres, go to Quick-fit and ask for colway remoulds. 20 quid each.
Image
SwirlyE30
E30 Zone Squatter
E30 Zone Squatter
Posts: 1509
Joined: Sun Jan 09, 2005 11:00 pm
Location: Worthing-Brighton South Coast
Contact:

Sun Aug 28, 2005 12:58 pm

Cheers geezer,ill give them a ring.

I can get some nankangs for Ԛ£33 including postage, so id be running the same as the front. Although thats a whole extra ten pounds each tyre.

I gota save for the next set... :P :twisted:
1986 Chevrolet Corvette. 330ftlb torque....V8s rule!
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!
Contact:

Mon Aug 29, 2005 8:22 am

Nankangs are decent for the Ԛ£Ã”šÃ‚£
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
User avatar
naylor04
E30 Zone Regular
E30 Zone Regular
Posts: 449
Joined: Wed Jan 12, 2005 11:00 pm
Location: Beds/Herts border, EAZEE NAH !

Mon Aug 29, 2005 9:41 am

I'm going for a pair of Nankangs for the front, i'm glad you said theyre ok for the Ԛ£Ã”šÃ‚£Ãƒ”šÃ‚£Ãƒ”šÃ‚£. Nankang NS2, 205/40/17 84v RF @ Ԛ£44.90 inc P+P from mytyres.co.uk.
Swirly are these the same as you can get for Ԛ£33 ?

Lee.
SwirlyE30
E30 Zone Squatter
E30 Zone Squatter
Posts: 1509
Joined: Sun Jan 09, 2005 11:00 pm
Location: Worthing-Brighton South Coast
Contact:

Mon Aug 29, 2005 12:14 pm

Nah mate, they were NS1's!


Think im gonna pop down to my local tyre scrappys, they normally have a lot of part worns, or basicalyl brand new ones off of cars that have been written off. Might be able to get some good tyres for propper cheap lol.



Might go 50 instead of the 55's ive got as well, more choice to look through
1986 Chevrolet Corvette. 330ftlb torque....V8s rule!
320Touring
E30 Zone Team Member
E30 Zone Team Member
Posts: 12316
Joined: Fri Feb 11, 2005 11:00 pm
Location: Glasgow (Scotland)

Mon Aug 29, 2005 1:51 pm

fook mate 8O 8O

i'd be keeping 2 steelies in the boot or such driftslaginess

apparenty the tyres fitted to Lada's and Skodas from Eastern Europe last the best cos the rubber is like concrete!!

if going to the scrappy, remember to check all the sidewalls for damage etc
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
Adam318i
E30 Zone Squatter
E30 Zone Squatter
Posts: 1649
Joined: Mon Jan 10, 2005 11:00 pm
Location: Cornwall

Mon Aug 29, 2005 6:49 pm

Naylor, check these tyres out, its what im gona be running on my Alpina reps

There supposed to be a good buget tyre to;

http://www.camskill.co.uk/products.php? ... b0s13p2310

Adam
Image
I love my Rice!
MISSY30
E30 Zone Regular
E30 Zone Regular
Posts: 426
Joined: Mon Jan 10, 2005 11:00 pm
Location: Cornwall

Mon Aug 29, 2005 7:03 pm

Yep Nankang's, Kumho's and Federal's are better budget's.
User avatar
naylor04
E30 Zone Regular
E30 Zone Regular
Posts: 449
Joined: Wed Jan 12, 2005 11:00 pm
Location: Beds/Herts border, EAZEE NAH !

Mon Aug 29, 2005 7:12 pm

Mind you, i do like the tread on these badboys !

http://www.camskill.co.uk/products.php? ... b0s13p2151
SwirlyE30
E30 Zone Squatter
E30 Zone Squatter
Posts: 1509
Joined: Sun Jan 09, 2005 11:00 pm
Location: Worthing-Brighton South Coast
Contact:

Mon Aug 29, 2005 7:38 pm

lol, they look nice. But then again are they any good? Think im gonna get my dad to ring up some places at work tommorow (we work at a car dealers) so he might be able to get some dicounted new ones, if not it will be down to the partworn shop at lunch time!
1986 Chevrolet Corvette. 330ftlb torque....V8s rule!
Bob_S
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5412
Joined: Sat Jun 11, 2005 11:00 pm
Location: chester, cheshire

Tue Aug 30, 2005 12:20 pm

christ almighty dont get kumho's mate there sh1te! I had em on the fiesta and it slid all day everyday when it was wet in the dry great but absolute utter bollocks in the wet! go for the falkens
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!
Contact:

Tue Aug 30, 2005 12:39 pm

falkens are crap in the wet or dry
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
Adam318i
E30 Zone Squatter
E30 Zone Squatter
Posts: 1649
Joined: Mon Jan 10, 2005 11:00 pm
Location: Cornwall

Tue Aug 30, 2005 12:47 pm

I know obviously khumo's and falkens are gona be poor being a budget tyre and all, but i've heard good reports on the khumo's whereas the Falkens are just 8O
Image
I love my Rice!
m1key
E30 Zone Newbie
E30 Zone Newbie
Posts: 195
Joined: Fri Apr 15, 2005 11:00 pm
Location: Stirling, Scotland UK

Tue Aug 30, 2005 9:19 pm

TOURINGDADDY
E30 Zone Addict
E30 Zone Addict
Posts: 2268
Joined: Sat May 14, 2005 11:00 pm
Location: PORTSMOUTH

Tue Aug 30, 2005 9:25 pm

i dont like any of these tyres and being in the tyre trade 4 a while i only use pirelli or conti
Image
Lordschleife
E30 Zone Squatter
E30 Zone Squatter
Posts: 1915
Joined: Sun Jan 09, 2005 11:00 pm
Location: Sunny Southsea
Contact:

Tue Aug 30, 2005 11:04 pm

naylor04 wrote:Mind you, i do like the tread on these badboys !

http://www.camskill.co.uk/products.php? ... b0s13p2151
People on the BMWGB mpower forum really rate the FK451 for the e30 m3, dunno if they do them in regular e30 sizes though?
Cheers,
Robin

Image
SwirlyE30
E30 Zone Squatter
E30 Zone Squatter
Posts: 1509
Joined: Sun Jan 09, 2005 11:00 pm
Location: Worthing-Brighton South Coast
Contact:

Tue Aug 30, 2005 11:06 pm

I got some new tyres today. Cant remember the name lol, Ԛ£25 quid each new. Not bad, although they aint amazing!..
1986 Chevrolet Corvette. 330ftlb torque....V8s rule!
massive
E30 Zone Regular
E30 Zone Regular
Posts: 965
Joined: Thu Aug 04, 2005 11:00 pm

Wed Aug 31, 2005 6:57 pm

your camber is is miles out looking a the wear on those tyres.
massive
E30 Zone Regular
E30 Zone Regular
Posts: 965
Joined: Thu Aug 04, 2005 11:00 pm

Wed Aug 31, 2005 6:59 pm

out of interest how many miles are you getting to the tyre with your kraving for donuts?
Lordschleife
E30 Zone Squatter
E30 Zone Squatter
Posts: 1915
Joined: Sun Jan 09, 2005 11:00 pm
Location: Sunny Southsea
Contact:

Wed Aug 31, 2005 7:00 pm

Thats what you get when you lower your car by a silly amount...
You need some camber correction plates SwirlyE30!
Cheers,
Robin

Image
massive
E30 Zone Regular
E30 Zone Regular
Posts: 965
Joined: Thu Aug 04, 2005 11:00 pm

Wed Aug 31, 2005 7:02 pm

camber correction plates.....where from and how many degrees do they correct?
SwirlyE30
E30 Zone Squatter
E30 Zone Squatter
Posts: 1509
Joined: Sun Jan 09, 2005 11:00 pm
Location: Worthing-Brighton South Coast
Contact:

Wed Aug 31, 2005 7:08 pm

I was told my camber could be sorted but its gota go somewhere with the right equiptment. Although whats camber plates?
1986 Chevrolet Corvette. 330ftlb torque....V8s rule!
massive
E30 Zone Regular
E30 Zone Regular
Posts: 965
Joined: Thu Aug 04, 2005 11:00 pm

Wed Aug 31, 2005 7:23 pm

unfortunately these cars have non-adjustable cambers so you would need to put a correction kit on, but these only correct by 1 degree or so. RCCA used to be available for E30 but not any more, these correct rear camber by upto 4 degrees. Fcuk knows what the plates are??

I would say your camber is negative by about 1-2 degrees. how low is it?
SwirlyE30
E30 Zone Squatter
E30 Zone Squatter
Posts: 1509
Joined: Sun Jan 09, 2005 11:00 pm
Location: Worthing-Brighton South Coast
Contact:

Wed Aug 31, 2005 7:43 pm

40mm at the rear, 60 up front
1986 Chevrolet Corvette. 330ftlb torque....V8s rule!
Chaos
E30 Zone Addict
E30 Zone Addict
Posts: 2460
Joined: Tue Jan 11, 2005 11:00 pm
Location: Cardiff, South Wales

Wed Aug 31, 2005 7:45 pm

Jhonno wrote:falkens are crap in the wet or dry
some are some arent

the fk451 is excellent wet or dry.
Chaos
causing havoc and mayhem wherever i go

Image
Lordschleife
E30 Zone Squatter
E30 Zone Squatter
Posts: 1915
Joined: Sun Jan 09, 2005 11:00 pm
Location: Sunny Southsea
Contact:

Wed Aug 31, 2005 7:59 pm

massive wrote:unfortunately these cars have non-adjustable cambers so you would need to put a correction kit on, but these only correct by 1 degree or so. RCCA used to be available for E30 but not any more, these correct rear camber by upto 4 degrees. Fcuk knows what the plates are??

I would say your camber is negative by about 1-2 degrees. how low is it?
I think they're top mount things fir the shocks?
Not sure - never had to deal with it myself

Do a search for comber correction on this forum, there are a few threads - sounds like there may be some BMW bushes you can get, only skimmed through a couple of threads though
Cheers,
Robin

Image
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!
Contact:

Thu Sep 01, 2005 1:38 am

wont be top mounts they have nothing to do with the camber...
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
Post Reply