engine change
zoners aims for the year 2010
Moderator: martauto
More work on the sport to make 100% perfect, hope to get around a bit.....more meets.
engine change
engine change
Last edited by Baz666 on Fri Dec 25, 2009 10:41 am, edited 1 time in total.

E46 328ci, sport bumpers, 19" style 95`s
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
no plans...ill just go with the flow and see how it all turns out.im hoping to be in australia by july/august though.
Last edited by fuzzy on Fri Dec 25, 2009 12:22 pm, edited 1 time in total.
Well the 325 touring is sat in my garage with no wheels, no suspension, no brakes, no interior apart from the dash and another 2.5 engine on the garage floor waiting for me to pull my finger out and put in the 2.8 crank.
So for the new year? Get it all back together and built, with a cage, in time for nurburgring in June!
Merry christmas all
So for the new year? Get it all back together and built, with a cage, in time for nurburgring in June!
Merry christmas all
'Assumption is the mother of all f**k ups'
-
essexgirlracer
- Essex meets organiser
- Posts: 1153
- Joined: Mon Feb 11, 2008 11:00 pm
- Location: ESSEX
- Contact:
Mine is to get Billy looking the nuts....(well to be fair he looks good now).... Want to get to more shows too if I can but I will have my escort cabby show car back soon so will being some somes in him too lol..... Want Clay to get his touring finished and his e30 cabby. Mind you the tourning is nearly done....... Want to get our mk2 rs2000 stripped and ready for being worked on too x x


same, i want the chromie on the road for this summerSimon13 wrote:get my 2 door on the road!
and to get the springs on tourer that i got for xmas
'83 320i chromie
'86 316 tech 1/M20B25 conversion
'91 318is touring
'87 chromie M10 rightness
Joe-318i
'86 316 tech 1/M20B25 conversion
'91 318is touring
'87 chromie M10 rightness
Joe-318i
-
pac1982
- Engaged to the E30 Zone

- Posts: 5330
- Joined: Fri Mar 07, 2008 11:00 pm
- Location: isle of wight
Re paint my sills, M52 engine conversion, some deep dish alloys, 60/40 suspension set up job done 

1991 BMW E30 318i Neon Design Convertible (Sold)
1990 BMW E30 325i Touring (Sold)
1990 BMW E30 318IS (Sold)
1990 BMW E30 316i (RIP)
Is that the 5 litre v12 engine you're talkin about?!?!?!?glenn wrote:to get the S62 installed and be driving the car before the end of the summer
Thats MAD!
'Assumption is the mother of all f**k ups'
-
Topblag
- Old Skooler

- Posts: 7095
- Joined: Wed Jul 30, 2008 11:00 pm
- Location: Fife - You got a problem with that ?
Finish my Sport and get the bodywork done on the cab.
Get married, buy a new house and enjoy the benefits of a double garage dedicated to my 2 E30s.
In that order !
Get married, buy a new house and enjoy the benefits of a double garage dedicated to my 2 E30s.
In that order !
1990 325i Cab auto in Alpine White II
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
-
glenn
- Engine Transplant Services

- Posts: 2198
- Joined: Sat Jan 29, 2005 11:00 pm
- Location: blackwood, south wales
no mate, it's the E39 M5 enginetomislav wrote:Is that the 5 litre v12 engine you're talkin about?!?!?!?glenn wrote:to get the S62 installed and be driving the car before the end of the summer
Thats MAD!
i've already done the V12 into an E30
-
andye30nut
- E30Zone Contributor
- Posts: 622
- Joined: Mon Apr 16, 2007 11:00 pm
- Location: Airdrie
paint the cabby do the engine convertion and get the track car finished (haha)
- Get rid of the hoard of E30 parts that I wont use.
- Paint correction/detail on the car to get it 'show ready'.
- New wheels, if the manufacturer gets their arse into gear.
- Go to plenty of shows/meets.
- Paint correction/detail on the car to get it 'show ready'.
- New wheels, if the manufacturer gets their arse into gear.
- Go to plenty of shows/meets.
Last edited by Dan320is on Fri Dec 25, 2009 4:31 pm, edited 1 time in total.
Finish it drive it until its broken then start again
-
ImysE30
- Married to the E30 Zone

- Posts: 22486
- Joined: Mon Jul 07, 2008 11:00 pm
- Location: Derby Massive!!
Loads of stuff, respray, kit, wheels, suspension, engine, interior and I.C.E 
Fixed
Fixed
Last edited by ImysE30 on Fri Dec 25, 2009 7:30 pm, edited 1 time in total.
Current Fleet:
E30 335i Turbo M3 Convertible Replica
E30 335i Turbo M3 Convertible Replica
-
Ollie_bwoii
- Married to the E30 Zone

- Posts: 8695
- Joined: Sat May 17, 2008 11:00 pm
- Location: Northampton
Get a new job. Going for one at the local car auctions.
Then I can afford to do the main things I want to my chromie, 40mm lower, 15" BBS
and later front valance.
Then I can afford to do the main things I want to my chromie, 40mm lower, 15" BBS
Ollie keep it as it is fella.Then I can afford to do the main things I want to my chromie, 40mm lower, 15" BBS and later front valance.
i wonder who will keep to there words on here and get the work done

E46 328ci, sport bumpers, 19" style 95`s
-
e30topless
- E30 Zone Team Member

- Posts: 13598
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
finish my project
I just hope the snow has fooked off so i can get it out of the garage !
I just hope the snow has fooked off so i can get it out of the garage !
Finish building M50B30 motor. Stick the 5 paddle clutch in. Re build the 3.15 quafe LSD into an E30 case. Fit new rear beam and trailing arm bushes to the powdercoated rear beam.
Get a little paintwork done.
Smoke everyone at pod ha ha
Get a little paintwork done.
Smoke everyone at pod ha ha

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
Firstly, wash the car - she's totally filthy.
Couple of bodywork bits and pieces to sort out, otherwise that's it. Although, if some nice original 16 inch Alpinas show up at the right price, I could be tempted.
Couple of bodywork bits and pieces to sort out, otherwise that's it. Although, if some nice original 16 inch Alpinas show up at the right price, I could be tempted.

Sold: 1986 E30 325i Cabriolet, Alpine White
Aquire and fit some more rare and tastey morsels to my sport.
Depending on how other future projects pan out, i may start my serious M20 build.
To cut a long story short, watch this space!
Depending on how other future projects pan out, i may start my serious M20 build.
To cut a long story short, watch this space!
- blackE30indy
- E30 Zone Camper

- Posts: 1289
- Joined: Sun Mar 30, 2008 11:00 pm
- Location: leicester/uk
Mine is to get it threw the mot,then tidy the body and enjoy drivin her
INDY
INDY
Welding as soon as the weather gets a little better.
Buy a shed so I can get all the e30 bits out of my garage and get the e30 back in the garage.
and to be realistic make a start on putting the 2.7 back together.
Buy a shed so I can get all the e30 bits out of my garage and get the e30 back in the garage.
and to be realistic make a start on putting the 2.7 back together.

-
The_Diddler
- Love it up the more door !
- Posts: 3619
- Joined: Tue May 27, 2008 11:00 pm
- Location: Tamworth, Staffs Lovely!!!!!!
-Get the Misano moredoor finished in time for meets in May
-Go to more meets/shows when the above car is ready
-Collect more morsels for the Misano moredoor and Henna chromie
-Get the underneath sorted on the Henna chromie later this year
-Hopefully get on a night college course for bodywork later in the year, always wanted to have a bash at that.......
-Go to more meets/shows when the above car is ready
-Collect more morsels for the Misano moredoor and Henna chromie
-Get the underneath sorted on the Henna chromie later this year
-Hopefully get on a night college course for bodywork later in the year, always wanted to have a bash at that.......
Get my arse into gear and get my chromie running and then finish it off ready for some meets. In the meantime will hopefully bodge the sport through an MOT so i have 'road worthy' E30.
!
Do tellDan320is wrote: - New wheels, if the manufacturer gets their arse into gear.





