pic request. modified arches

Show off your pride and joy here

Moderator: martauto

SickEddy
E30 Zone Newbie
E30 Zone Newbie
Posts: 114
Joined: Wed Oct 29, 2008 11:00 pm
Location: Aylesbury, Bucks

Post Sat Nov 21, 2009 2:02 pm

hello everyone.
i am requesting pics of modified arches. stretched, flared or something completely different. whatever was needed for very wide alloys. i have got myself some 8.5 and 10j 17inch alloys and they will be going on the car. i would like it to look as standard as possible but post up whatever you have done or seen.

thanks

also would be even better if the pics have a tech 2 kit
User avatar
Fal_325i
E30 Zone Camper
E30 Zone Camper
Posts: 1261
Joined: Sun May 21, 2006 11:00 pm
Location: Bucks

Post Sat Nov 21, 2009 2:35 pm

Sorry mate, can't help with the pics, did see your car coming behind me on Oxford Road a few months back with your xenon's on, I was in my Golf and was going straight over the roundabout you done a left towards Bicester Road ends, car sounded good though.
SickEddy
E30 Zone Newbie
E30 Zone Newbie
Posts: 114
Joined: Wed Oct 29, 2008 11:00 pm
Location: Aylesbury, Bucks

Post Sat Nov 21, 2009 2:47 pm

thanks, miss driving my sport :( its off the road at the moment having a 5 stud conversion and e36 steering rack. back in my old 320 zender atm. still trying to get money for an m52 lump but just bought 17inch borbet a's so kinda ruined that lol
jasso
E30 Zone Regular
E30 Zone Regular
Posts: 531
Joined: Tue Mar 28, 2006 11:00 pm

Post Sun Nov 22, 2009 7:17 pm

I take it you bought the ones off ebay, i concidered them myself but i dont know if your aware that if you do a e36 rear 5 stud conversion the hub sits 12mm further out so it will get agressive
SickEddy
E30 Zone Newbie
E30 Zone Newbie
Posts: 114
Joined: Wed Oct 29, 2008 11:00 pm
Location: Aylesbury, Bucks

Post Mon Nov 23, 2009 2:01 am

theyre not the ones from ebay but probably the same thing. i have 9j at the moment. so an extra inch and a half including the 12mm + theyre 17s not 16s...hmm...im still doing it, i will consider anything to get these on the car other than a genesis kit. but i do want it looking as stock as possible

anybody have any pics?
SickEddy
E30 Zone Newbie
E30 Zone Newbie
Posts: 114
Joined: Wed Oct 29, 2008 11:00 pm
Location: Aylesbury, Bucks

Post Mon Nov 23, 2009 2:15 am

actually the offset is 20 for the new alloys and the 9j were 15 so they will sit further in the arch so that helps. stil will be a big mod though but im sure someone has done it before
jasso
E30 Zone Regular
E30 Zone Regular
Posts: 531
Joined: Tue Mar 28, 2006 11:00 pm

Post Mon Nov 23, 2009 10:50 pm

Have you concidered e30 m3 rear hubs and disc's?? or even getting a engineering company to machine out some blank hubs and provided the diameter of the blank hub is wide enough get it drilled 5 x 120
FMH
E30 Zone Addict
E30 Zone Addict
Posts: 3213
Joined: Tue Jun 02, 2009 11:00 pm
Location: Birmingham

Post Mon Nov 23, 2009 11:52 pm

SickEddy wrote:actually the offset is 20 for the new alloys and the 9j were 15 so they will sit further in the arch so that helps. stil will be a big mod though but im sure someone has done it before
The wheels sitting in could also be an issue, they will probably catch the inner arch, so you might need spacers and futher flare. What wheels are they?
FMH
E30 Zone Addict
E30 Zone Addict
Posts: 3213
Joined: Tue Jun 02, 2009 11:00 pm
Location: Birmingham

Post Tue Nov 24, 2009 12:01 am

Just to give you and idea of what sort of work you'l need to do.
Heres a few pics i got from the guy who modified the m3 cab rep i'v brought.
These wheels are 10j ET13, bolted onto the normal 4 stud just to see how they looked, after the 5 stud, they came out a further 12mm.
A flare/roll will be no help at all to be honest, you'l definitely need to butcher the arches, maybe adapt some from another car.
With these wheels fitted with the e36 set up, not even the m3 arches could clear them.

Image

Image

Image
User avatar
Zizzle
E30 Zone Regular
E30 Zone Regular
Posts: 798
Joined: Mon Sep 10, 2007 11:00 pm

Post Tue Nov 24, 2009 12:20 am

SickEddy wrote:hello everyone.
i am requesting pics of modified arches. stretched, flared or something completely different. whatever was needed for very wide alloys. i have got myself some 8.5 and 10j 17inch alloys and they will be going on the car. i would like it to look as standard as possible but post up whatever you have done or seen.

thanks

also would be even better if the pics have a tech 2 kit

Here you go mate...

this is sitting on 10's all the way round...


http://www.e30zone.net/modules.php?name ... t=#1655567
SickEddy
E30 Zone Newbie
E30 Zone Newbie
Posts: 114
Joined: Wed Oct 29, 2008 11:00 pm
Location: Aylesbury, Bucks

Post Thu Nov 26, 2009 12:51 am

FMH wrote: The wheels sitting in could also be an issue, they will probably catch the inner arch, so you might need spacers and futher flare. What wheels are they?
the new alloys are 10j et20 17inch borbet a's. will probably be running 245/35 tyres. the front should be ok (not 10j) its only the rears im worried about. at the moment i have 9j 16s and they are et15 so new ones will be a bit further in but then 12mm out after the 5 stud (old alloys are 4 stud) so i dont think they will be rubbing on the inside so shouldnt need spacers. will just be the outside of the car needing mods.
i love that cab. and the arches still look stock. may have to get in touch with the owner and find out exactly what was done and where. borbets too so probably same offset.
and tech 2 kit, main reason i asked for that was to see if the arch needed pulling out nearer the bottom not just the top, if it was done the kit still looks flush all the way.

cheers people

actually how much difference is there between 15 and 20 offset in mm? +12mm out from 5 stud, - about the same from extra width - et5. i think i have around 5mm clearance at the moment ... if its not an easy answer dont worry. this was only a quick thread for arch pics, thanks
FormerMember
E30 Zone Regular
E30 Zone Regular
Posts: 848
Joined: Sun Jul 24, 2005 11:00 pm
Location: Global

Post Thu Nov 26, 2009 6:50 am

Here's my cabrio, factory arches were stretched quite a bit. Now 10" ET14 with 245/35 rubber and 280mm from wheel center to arch rolls nicely without rubbing. Camber is adjusted to -2 deg.

Image

Image

Image
E30 Cabrio M-Tech, powered by V8
E34 M5 3.8 x 2
Alpina D10 Touring #33/93

E46 318i Touring
Toyota Hiace 4wd
march109
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6632
Joined: Sun Aug 20, 2006 11:00 pm
Location: Bournemouth

Post Thu Nov 26, 2009 3:07 pm

Flared arches, done with new inner and outer genuine BMW arches both sides. Not too agressive but done to fit some 8j Ketskins without rubbing on a 60mm drop. Picture is obviously with the BBS RMs though.

Image

Heres same car same arches same drop on 7.5J 17inch Alpina reps

Image

Will check on offset of the RMs later today, but they always scrubbed the arches on my last e30. Fit like a glove on this one. Council drop to be removed in favour of 30-45mm over winter.
325i Tech 1 Touring, breaking.

2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Thu Nov 26, 2009 3:13 pm

march109 wrote:Flared arches, done with new inner and outer genuine BMW arches both sides.
BMW dont do rear outer arch repair sections, just the inners and whole rear quarters.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Thu Nov 26, 2009 3:30 pm

Is it a difficult job to flare standard e30 arches?
Current Fleet:

E30 335i Turbo M3 Convertible Replica
User avatar
gooner1
Out humping Reindeer
Posts: 13280
Joined: Fri Apr 14, 2006 11:00 pm
Location: Northampton.For my sins.

Post Thu Nov 26, 2009 3:33 pm

bss325i wrote:
march109 wrote:Flared arches, done with new inner and outer genuine BMW arches both sides.
BMW dont do rear outer arch repair sections, just the inners and whole rear quarters.
Correct, but there are two parts for the inner, the outer inner
and the inner inner. That confused me greatly when i ordered
what i thought was an outer arch repair section.
Ended up buying the complete rear quarter as well in the end.
Image
march109
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6632
Joined: Sun Aug 20, 2006 11:00 pm
Location: Bournemouth

Post Thu Nov 26, 2009 3:53 pm

bss325i wrote:
march109 wrote:Flared arches, done with new inner and outer genuine BMW arches both sides.
BMW dont do rear outer arch repair sections, just the inners and whole rear quarters.
Well yes it was new rear quarters, and rear bumper and rear lights and rear slam panel boot floor ect ect, all courtesy of the silly tart that ran up Adams backside when he owned the car, have reciepts for it all.

The whole rear end is just 7 years old this winter. The only thing that pisses me off is they only painted the rear and not the whole car, and if your anal like me you notice the colour difference quite a bit. Someday I'll do it properly since I need a new sunroof panel and front wings.
325i Tech 1 Touring, breaking.

2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Thu Nov 26, 2009 3:55 pm

march109 wrote:Flared arches, done with new inner and outer genuine BMW arches both sides. Not too agressive but done to fit some 8j Ketskins without rubbing on a 60mm drop. Picture is obviously with the BBS RMs though.

Image

Heres same car same arches same drop on 7.5J 17inch Alpina reps

Image

Will check on offset of the RMs later today, but they always scrubbed the arches on my last e30. Fit like a glove on this one. Council drop to be removed in favour of 30-45mm over winter.
Did you use spacers for the ~RM's, just too clear it up for others, as some say you need them and some say you don't.
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Thu Nov 26, 2009 3:56 pm

march109 wrote:
bss325i wrote:
march109 wrote:Flared arches, done with new inner and outer genuine BMW arches both sides.
BMW dont do rear outer arch repair sections, just the inners and whole rear quarters.
Well yes it was new rear quarters, and rear bumper and rear lights and rear slam panel boot floor ect ect, all courtesy of the silly tart that ran up Adams backside when he owned the car, have reciepts for it all.

The whole rear end is just 7 years old this winter. The only thing that pisses me off is they only painted the rear and not the whole car, and if your anal like me you notice the colour difference quite a bit. Someday I'll do it properly since I need a new sunroof panel and front wings.
Holy smoke! I'm surprised that didn't write the car off as that wouldn't have been cheap!
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
march109
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6632
Joined: Sun Aug 20, 2006 11:00 pm
Location: Bournemouth

Post Thu Nov 26, 2009 3:57 pm

No spacers ever. Don't like them. Wouldn't have the RMs if I needed them, I'll check the offset later today like I said. But they work fine without them and I've no reason to see why anyone would unless the offset was cack. But FFS buy the right ones in the first place.
325i Tech 1 Touring, breaking.

2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
march109
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6632
Joined: Sun Aug 20, 2006 11:00 pm
Location: Bournemouth

Post Thu Nov 26, 2009 4:00 pm

bss325i wrote:
march109 wrote:
bss325i wrote: BMW dont do rear outer arch repair sections, just the inners and whole rear quarters.
Well yes it was new rear quarters, and rear bumper and rear lights and rear slam panel boot floor ect ect, all courtesy of the silly tart that ran up Adams backside when he owned the car, have reciepts for it all.

The whole rear end is just 7 years old this winter. The only thing that pisses me off is they only painted the rear and not the whole car, and if your anal like me you notice the colour difference quite a bit. Someday I'll do it properly since I need a new sunroof panel and front wings.
Holy smoke! I'm surprised that didn't write the car off as that wouldn't have been cheap!
Twasn't (is that a word?)

But if you remember Adam at all you'd know he liked to put his hands in his own pockets quite a bit. I had 3 folders of receipts and invoices off him when I bought the car.

Wasn't done at a BMW delearship though, local independant bodyshop that I know rather well due to a few other smashes.
325i Tech 1 Touring, breaking.

2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
SickEddy
E30 Zone Newbie
E30 Zone Newbie
Posts: 114
Joined: Wed Oct 29, 2008 11:00 pm
Location: Aylesbury, Bucks

Post Tue Dec 01, 2009 8:24 pm

when everyone says doing a 5 stud will push the wheels out 12mm from 4 stud, is this just the front or at the back aswell? thanks
FMH
E30 Zone Addict
E30 Zone Addict
Posts: 3213
Joined: Tue Jun 02, 2009 11:00 pm
Location: Birmingham

Post Tue Dec 01, 2009 8:52 pm

SickEddy wrote:when everyone says doing a 5 stud will push the wheels out 12mm from 4 stud, is this just the front or at the back aswell? thanks
Only the rear.
SickEddy
E30 Zone Newbie
E30 Zone Newbie
Posts: 114
Joined: Wed Oct 29, 2008 11:00 pm
Location: Aylesbury, Bucks

Post Tue Dec 01, 2009 8:54 pm

thanks, anyone with 5 studs please can you put up your alloy width and offset? thanks