drinks holder for e30
Moderator: martauto
-
Morat
- E30 Zone Team Member

- Posts: 8943
- Joined: Thu Feb 09, 2006 11:00 pm
- Location: The Peoples Republic of Yorkshire
BMW suck at cupholders!
E30 - none
E39 - two front (fragile) two rear (always broken)
E46 - none in the front, touring has two in the rear centre armrest which are useless unless you're a rear seat passenger with anorexia.
An aftermarket drinks holder for the E30 would be great
E30 - none
E39 - two front (fragile) two rear (always broken)
E46 - none in the front, touring has two in the rear centre armrest which are useless unless you're a rear seat passenger with anorexia.
An aftermarket drinks holder for the E30 would be great
E30 Touring 0.35 cD - more slippery than prison soap 

Praise the Lard... and pass the dripping!

Praise the Lard... and pass the dripping!
- flipmode786
- E30 Zone Newbie

- Posts: 132
- Joined: Tue Sep 22, 2009 11:00 pm
- Location: edinburgh
i want a drink holder and a centre arm rest
-
Topblag
- Old Skooler

- Posts: 7095
- Joined: Wed Jul 30, 2008 11:00 pm
- Location: Fife - You got a problem with that ?
You can wedge a can of juice in the right hand corner in the space behind ashtray and below heater control panel - it works a treat and doesn't budge under hard cornering.
Simples.
Simples.
1990 325i Cab auto in Alpine White II
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Sooner have something like that in the passenger seatFMH wrote:Something like this in the centre console:sihooker wrote:How?FMH wrote:i'm making my own soon
Youth is wasted on the young.
could you not have done it without the need to retrim the centre console by marking out the holes and making a series of cuts from the centre of the circle out to the circumfrence peeled the vinyl ? up and then cut out the hole and wrapped the vinyl round the underneath and glued it back on .. ? if you were putting some kind of trim ring round the top i think that would be more then adequateFMH wrote: will do Immy, cut the holes and now waiting to get the whole centre console re-trimmed
-
gareth
- E30 Zone Team Member

- Posts: 11009
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
just drink red bull. the cans wedge in the door pocket perfectly and don't spill of fall over. simples 
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
bobcat
- E30 Zone Newbie

- Posts: 35
- Joined: Sun Oct 04, 2009 11:00 pm
- Location: mid north coast australia
e46 has an option of cupholders in the console btween the seats,put them in my touring they are great.Morat wrote:BMW suck at cupholders!
E30 - none
E39 - two front (fragile) two rear (always broken)
E46 - none in the front, touring has two in the rear centre armrest which are useless unless you're a rear seat passenger with anorexia.
An aftermarket drinks holder for the E30 would be great
ah chromie -classic not plastic
-
bpowell555
- E30 Zone Camper

- Posts: 1011
- Joined: Sun Jun 14, 2009 11:00 pm
Problem solved!! Think outside of the holder and let the cup do the hard work - just drove 20miles, pretty hard with a boiling hot cup of coffee to sip along the way...

This is OK...

This works like a dream, especially if you angle the cup's opening at 9pm, not 6pm - work slike a charm.....

This is OK...

This works like a dream, especially if you angle the cup's opening at 9pm, not 6pm - work slike a charm.....

325i Touring OUT
325i Touring OUT
E36 M3 Evo IN
106 Quicky IN
Still here for the quality advice!
You can get cheapo things from ebay that clip over the door card. Only good on the Mway though as they tend too fall off around corners!
Example:
http://cgi.ebay.co.uk/CAR-VAN-TRUCK-FOL ... 2309fcbae1
Example:
http://cgi.ebay.co.uk/CAR-VAN-TRUCK-FOL ... 2309fcbae1

1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
ones from a newish mondeo pop out of the centre console, im going to fit some of those to mine soon ish.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
Just noticed the jug holders in the centre consul - i mean mug holdersd1mkaz wrote:how are you doin'FMH wrote: Something like this in the centre console:
Phase I - Bodywork Complete
http://www.e30zone.net/modules.php?name ... by+restore
Phase II - 2.8 stroker- Complete
Project II - 325 Motorsport Cabriolet Restoration.
http://www.e30zone.net/modules.php?name ... by+restore
Phase II - 2.8 stroker- Complete
Project II - 325 Motorsport Cabriolet Restoration.
-
Morat
- E30 Zone Team Member

- Posts: 8943
- Joined: Thu Feb 09, 2006 11:00 pm
- Location: The Peoples Republic of Yorkshire
Ah, interesting. I've just found what you mean on REALOEM. Our car has the phone console which isn't very useful because the 10 year old motorola is carp.bobcat wrote:e46 has an option of cupholders in the console btween the seats,put them in my touring they are great.Morat wrote:BMW suck at cupholders!
E30 - none
E39 - two front (fragile) two rear (always broken)
E46 - none in the front, touring has two in the rear centre armrest which are useless unless you're a rear seat passenger with anorexia.
An aftermarket drinks holder for the E30 would be great
E30 Touring 0.35 cD - more slippery than prison soap 

Praise the Lard... and pass the dripping!

Praise the Lard... and pass the dripping!







