Guys
I got a tin of maurtius blue mixed from halfrods and painted my tailgate. however the shade is way out and has turned out orange peel like. I read somewhere if i wet and dry it with 1200 or finer grade, this will make it less noticeable.
Can anyone advise please?
orange peel paint!!!
Moderator: martauto
-
smithy318i
- Engaged to the E30 Zone

- Posts: 5797
- Joined: Thu Apr 28, 2005 11:00 pm
- Location: Tyne & Wear
Standard problem with spraying with tins mate.
1200 is okay, but try and get some SF.
1200 is okay, but try and get some SF.

-
johnono
- E30 Zone Addict

- Posts: 4677
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: land of the vikings
if u dont spirit clean the area before u spray it will "orange peel" ( and u also need to "key" the area too before that, key with a scotchbrite pad and spirit wipe after, and it should go on ok,..) also dont hit it too hard too many times
i have done lots of light coats ( 5 or 6), with 30 second spacing.. or 2 / 3 heavy coats with a good 5 mins inbetween., depends on the type of paint though
silvers and heavier metalics dry quicker but " dustier" than flat gloss colours so spray a similar surface before u do the job
i have done lots of light coats ( 5 or 6), with 30 second spacing.. or 2 / 3 heavy coats with a good 5 mins inbetween., depends on the type of paint though
silvers and heavier metalics dry quicker but " dustier" than flat gloss colours so spray a similar surface before u do the job
-
philglasgow
- E30 Zone Newbie

- Posts: 76
- Joined: Mon Jul 04, 2005 11:00 pm
the area was primed rubbed down , primed again then panel wiped ,before painting ,my question is will rubbing down with 1200 grade or finer get the orange peel out?
Cheers
Phil
Cheers
Phil
-
smithy318i
- Engaged to the E30 Zone

- Posts: 5797
- Joined: Thu Apr 28, 2005 11:00 pm
- Location: Tyne & Wear
Yes.
Before

After.

Before

After.


