Daimlerman's cabbie project...trinkets added....

Show off your pride and joy here

Moderator: martauto

B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Mon Aug 10, 2009 8:14 am

This is looking very good malc. Have you decided what to do with the interior yet? I'd bite the bullet and just buy the best leather trim you can find. No retrims, just find a nice original set. Looks like the cars gonna deserve it.
B7's Motto. "If it's French, BURN IT!!!!!!"
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Mon Aug 10, 2009 3:30 pm

rubber_duck89 wrote:at least your allowed another e30 i cant even dream on ebay without getting my head chewed off .
Time to give her the push then Mate. It's so sad to see the 'wife forces sale' adverts. Unless she's paying for it, 'the wife' can f*ck right off!

Oh, nice work Mr Daimler. Think of the money you put into the car as an investment - a nice E30 Convertible will always have a value. If the bugger starts to get you down, think of cruising around Loch Haggis next year with the hood down!
psychochild187
E30 Zone Squatter
E30 Zone Squatter
Posts: 1857
Joined: Tue Feb 08, 2005 11:00 pm
Location: brighton

Post Mon Aug 10, 2009 3:49 pm

god do they all rust in so may places
everyday i look at mine i see more
i need to put it in the garage fast or it will get worse before i can make it any better
tomson
E30 Zone Addict
E30 Zone Addict
Posts: 3598
Joined: Sun Nov 06, 2005 11:00 pm
Location: Bristol

Post Mon Aug 10, 2009 11:26 pm

Switchable auto would be lovely in this cruiser Malc, had any more thoughts about it ? winkeye
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Wed Aug 12, 2009 12:19 pm

My entry for the council competition...
Image
Image
Ordered further supplies from those gents at Cotswold at the end of last week and enquired again about seat covers in Neon Green,cushions were still NLA but the ware house had found some seat back covers.....
Image
Image
I bought two....£128.73 each :eek: and Calamity will be able to adapt one for a cushion,these seats will be the most expensive E30 seats ever!
This is the final piece in this jigsaw puzzle,any other bits will be available somewhere...
Tom,settled on a manual 'box,I needed to get the clutch working for the bodyshop trip so bought a new master,the one in the pretty red box...
Youth is wasted on the young.
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Wed Aug 12, 2009 12:27 pm

ummmm :drool: new degisn edition seat covers :D


i would love a set in mine shame there only for cabbys :(
clarko74
Old Skooler
Old Skooler
Posts: 1585
Joined: Sat Mar 05, 2005 11:00 pm
Location: Kent

Post Wed Aug 12, 2009 1:36 pm

I've just read through this whole thread, lovely project you've got on the go here. It's a great feeling knowing that rust won't be an issue for a long time to come.

Well done procuring that fabric. I'm looking forward to the updates.
clarko74
Image
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Wed Aug 12, 2009 6:20 pm

Well done on the seat fabric :D

Not far off now :cool:
Current Fleet:

E30 335i Turbo M3 Convertible Replica
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Thu Sep 03, 2009 2:02 pm

Saga of the Seat....
We started with this drvers seat..
Image
Upon dismantling the seat I found this broken seat base...
Image
And we then discovered that 4 of the 6 covers needed replacing,both r/h bolsters and not only the cushion as can be seen,but the backrest centre was worn threadbare in two places.
When placing a parts order with CotswoldBMW I enquired about the availability of fabric on the roll and seat covers in neon green.The lads at Cotswold were very interested and helpfull, promising to phone Germany to check for me.Unfortunately they rang me back and said that nothing was currently available.
So the search was on for s/h fabric,or someone who could make up a small amount of matching fabric...
Nothing showed up,car went off down the road for it's re-spray and I mentioned my problems to the painter...he commented that he had problems finding paint...and also mentioned that he had learnt that not many neon green cabbies were sold,so what happened to the unsold ones?
With my next parts order to CotswoldBMW I asked again about seat covers,and this time was told that 27 backrest covers were showing as available in Germany...we had already taken carefull measurments and knew that a backrest cover could be 'adapted' for a cushion cover so I ordered two...at a cost with zone discount..of a shade under £130 each :eek:
This is what arrived about 10 days later...
Image
and
Image
The backrest was little more than a fitting job,
Image
But the cushion cover needed a strip adding to each side and modification to one end to remove the headrest mounting and add the theigh support thingy.The covers are held on at the factory with steel rods and 'hog rings'.Hog rings are a device invented by the devil himself,arkward to remove and next to impossible to insert without the correct 'hog ring pliers' which are sold by Frosts at enormous expense.We used cable ties... :o:
Image
Image
Image
And the finished result,
Image
We adapted two backrest bolster covers to make one cushion bolster cover,
Image
I reckon that Calamity has done really well with this seat,many thanks!
Now to the next problem!
After removing this poor little thing winkeye Image
I was able to pressure wash the engine bay out and found this,
Image
Image
Which I really should have checked properly before the re-spray :cry: and this from careless handling of brake fluid,
Image
So I bought a new welding mask this morning....
To be continued...
Youth is wasted on the young.
E30BeemerLad
Married to the E30 Zone
Married to the E30 Zone
Posts: 16806
Joined: Mon Mar 28, 2005 11:00 pm
Location: Norfolk

Post Thu Sep 03, 2009 2:06 pm

It'd be a dull life without these dramas eh Malcolm :)
m_jermyn
E30 Zone Team Member
E30 Zone Team Member
Posts: 4208
Joined: Sat Mar 14, 2009 11:00 pm
Location: Sydney Australia Mate

Post Thu Sep 03, 2009 2:19 pm

Keep it up malcom, bummer about the rust in the bay dude.

Mike
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Thu Sep 03, 2009 2:25 pm

m_jermyn wrote:Keep it up malcolm, bummer about the rust in the bay dude.

Mike
My fault for not checking properly before the bodyshop,but to get the car to and fro I needed the engine in and was reluctant to do 'half a job' on the cleaning before taking the engine out.
We do say in England that you should expect a car that has lived in Scotland to be rusty....I will just have to take care with the MiG!
Youth is wasted on the young.
E30Gheko
E30 Zone Addict
E30 Zone Addict
Posts: 3789
Joined: Sun Sep 28, 2008 11:00 pm
Location: Wirral

Post Thu Sep 03, 2009 2:59 pm

Nice job on the seat Malcolm! Shame about the rust in the bay. I have a little in the same place but it hasn't taken hold quite as badly yet. :?
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Thu Sep 03, 2009 3:18 pm

Seat looks great :cool:

Shame about the rust :(

Keep it going 8)
Current Fleet:

E30 335i Turbo M3 Convertible Replica
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Thu Sep 03, 2009 5:16 pm

now how about buying "calamity"a tumble drier as a reward ...you know you want to winkeye
Image
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Thu Sep 03, 2009 5:37 pm

DaveD wrote:now how about buying "calamity"a tumble drier as a reward ...you know you want to winkeye
Years ago I was running an elderly XJ6.Needed two tyres.
Jane asked how much they had cost...'£140,dear' ,Itold her...
'I could have bought a washing machine for that!',she replied.
'Yes darling,but it would not have fitted the rims.....' winkeye
Youth is wasted on the young.
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Sep 12, 2009 11:01 am

It's not pretty...
Image
Image
...but it should be strong!
Youth is wasted on the young.
m_jermyn
E30 Zone Team Member
E30 Zone Team Member
Posts: 4208
Joined: Sat Mar 14, 2009 11:00 pm
Location: Sydney Australia Mate

Post Sat Sep 12, 2009 11:04 am

What is it? Never seen that stuff before.
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Sep 12, 2009 11:44 am

I have welded steel plate over the rust holes,then seam sealed,primed with a zinc rich primer, followed by a top coat of B/Q 'forrest green'....from the wheel housing side,seamsealed,painted and waxoiled....mucky offwhite furry thing in the foreground of the second piccie is an old towel used to protect the fresh paintwork....
Last edited by daimlerman on Wed Jan 28, 2015 9:25 pm, edited 1 time in total.
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Sat Sep 12, 2009 12:25 pm

could you not get a rattle can mixed in neon green malcolm? with the paint code, my local pait supplier can mix one up. it'll look a lot neater then
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
E30Mark
E30 Zone Team Member
E30 Zone Team Member
Posts: 8107
Joined: Sun Jan 09, 2005 11:00 pm
Location: Wimborne, Dorset

Post Sat Sep 12, 2009 12:52 pm

All that effort in respraying, then you 'Dulux' the engine bay :?
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Sep 12, 2009 1:26 pm

This car will have round wheels fitted,so I can drive it,not plant it in a field to be looked at!
Once the engine is in and the headlights fitted,you will not be able to see much paintwork in the 'bay.
If I was building to show the car,I would have struggled to get the thing to the painter with the engine out and had a 'proper' job done!
Still,we all have a point of view and if I was afraid of your comments/criticisam I would not have posted the 'before' or 'after' shots.
Youth is wasted on the young.
m_jermyn
E30 Zone Team Member
E30 Zone Team Member
Posts: 4208
Joined: Sat Mar 14, 2009 11:00 pm
Location: Sydney Australia Mate

Post Sat Sep 12, 2009 1:28 pm

after all its there to be driven is it not. Dont look like it will rust there again anyway lol. Good work Malc
Blitz
Married to the E30 Zone
Married to the E30 Zone
Posts: 11151
Joined: Mon Jan 30, 2006 11:00 pm
Location: East London+Basildon

Post Sat Sep 12, 2009 1:58 pm

Looks great. I love those seats.
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Sat Sep 12, 2009 2:09 pm

gareth wrote:could you not get a rattle can mixed in neon green malcolm? with the paint code, my local pait supplier can mix one up. it'll look a lot neater then
Have a job now it's in dulux. It'll react like a nuclear explosion.

Shame about that rust Malc. looks like the welding went okay though. Did you cut away to good metal first?
B7's Motto. "If it's French, BURN IT!!!!!!"
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Sep 12, 2009 2:46 pm

B7 wrote:
Shame about that rust Malc. looks like the welding went okay though. Did you cut away to good metal first?
Oh yes,the plates that you can see are on the edges of sound metal.I am not very good with the MiG,when I retire or am next out of work I shall do a collage course!
Youth is wasted on the young.
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Sep 12, 2009 10:01 pm

Just looking at those photos again,the flash has made the neon green 'blue' but kept the other green,it's not as painful in real life!
Spent the day swapping the rear springs on the touring,have a hunt for this year's zone roam photos,my touring looks low at the rear,or high at the front,the photo at John o' Groats shows it well against Grant's cabbie,the springs I took out have the same paint marker as the rear springs I took out of the 4 door last year....I fitted these to the cabbie,new M-tec rears on the left,the old cabbie rears are now in the touring!
Image
Youth is wasted on the young.
User avatar
hoshy
E30 Zone Wiki Guru
E30 Zone Wiki Guru
Posts: 4118
Joined: Tue Jan 18, 2005 11:00 pm
Location: Munich

Post Sun Sep 13, 2009 2:59 am

Hey Malc. Great job Jane did on the seats. Look like the project is moving on well.

Are you gonna Mtec it all around? I only ask cos for a while my 318 had iS 15mm rears and stock front and it induced awful understeer.
E46 M3 CSL but dreaming of another E30.
User avatar
Felix79
All loved up !
Posts: 5134
Joined: Sat May 24, 2008 11:00 pm
Location: Hereford

Post Sun Sep 13, 2009 6:03 am

I really really really like the colour. Also for me it's intresting to see emergancy welding repairs done, gives me hope I might be able to do some bits if needed.

I really hope I'll get to see it in the flesh one day as I think it brilliant what you are doing to it.
Felix79 aka Dan
If you got haters, then your doing something right!
E85 Z4M Roadster
Dezzy
CR24v it's a lifestyle
Posts: 11974
Joined: Thu May 15, 2008 11:00 pm
Location: Middlesbrough

Post Sun Sep 13, 2009 9:11 am

I keep checking this thread. Really wasn't sure about the colour to start with. Defos a grower though. As said above even green hammerite would have at least given proper protection?
Really good to see someone going to these lengths to save an E30 :cool:
Image
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sun Sep 13, 2009 12:17 pm

hoshy wrote:Hey Malc. Great job Jane did on the seats. Look like the project is moving on well.

Are you gonna Mtec it all around? I only ask cos for a while my 318 had iS 15mm rears and stock front and it induced awful understeer.
I fitted M-tec springs/dampers alround to the 4 door after the first roam,and seeing the videos :mad: ,I am fitting the 2.7 engine and the front struts I built up for the 4 door to the cabbie.
Cabbie/touring use a stiffer rear spring,though,so I bought new rears.All the stuff removed from the cabbie suspension -wise is being ,erm,re-cycled,the rear springs went into the touring yesterday and the front struts will join that little 4 pot thing in the 4 door shell next weekend-ish....the gas rear dampers bought new for the 4 door will transfer as well...
Youth is wasted on the young.
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Thu Oct 15, 2009 11:53 am

Not a lot of progress over the last month,lots of little jobs finished,though.
Brackets added to the engine bay to suit the M20.Painted neon green,please note!
Image
Fitted HID's to the folly a few weeks back,well impressed,so I have fitted a set to the cabbie.
Managed to get the magic box under the light cluster,with the cover on in the engine bay it is completely concealed,much neater fit than I managed with the other one,as that has the ABS pump in the way one side and my air horns the other!

Image
Fitted the front grille as well,been working on the engine,replaced most of the crankcase breather system as it was leaking oil,discovered that I had failed to fit the big washers over the 'O' rings correctly last time.. :mad:
No alternater fitted here,the new polybushes for that arrived yesterday,alternator now fitted!
Just waiting for the gearlinkage bits to arrive,then the engine/box can go in.
Image
Youth is wasted on the young.
m_jermyn
E30 Zone Team Member
E30 Zone Team Member
Posts: 4208
Joined: Sat Mar 14, 2009 11:00 pm
Location: Sydney Australia Mate

Post Thu Oct 15, 2009 11:55 am

Looking good Malcom... Getting excited now?

Mike
beemerbird
Married to the E30 Zone
Married to the E30 Zone
Posts: 8620
Joined: Mon Mar 24, 2008 11:00 pm
Location: Suffolk

Post Thu Oct 15, 2009 12:02 pm

Great work, Malcom. Looks like she'll be ready for the first snows of winter :wink:
If it ain't broke, fix it till it is
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Thu Oct 15, 2009 5:29 pm

Not long to go now, then you can enjoy the joys on winter cabby motoring :D
Current Fleet:

E30 335i Turbo M3 Convertible Replica