Heres something i found extremely good on the internet before which for some reason doesnt want to now load :\ so ive copied it over includin pics for anyone who wants to give it a go!
The Ghost Car: cutting and blending techniques
When creating collages from multiple photographs, you always deal with cutting and blending. Cutting refers to extracting objects, persons or parts of a photograph to be used in a composition with other parts from other photographs. Blending is the techniques used to make the parts work well with one another, as if they would be shot in the same photograph.
The techniques I will be presenting are not the only way to get to these results, but they are what I use most often.
Tools: I am using Photoshop CS2, some photographs taken with my Canon XTi, and a Wacom Intuos tablet, on a PC running Windows XP. Although I will be using the tablet's pen in the steps below, they can be followed even if you use a mouse (as I used to, before I started using the tablet).
Difficulty level: medium. This tutorial assume that you already know some basic operations in Photoshop (opening, saving, creating files, using the tools, and the other palettes, working with layers and some basic selections).
I have chosen this image of an old car, taken at the junk yard. I want to extract the car and place it in a different background.
(Note: my original picture size is 2592 x 3888 pixels.)
Cutting the car off the background
In Photoshop, magnify your image at 100% and select the pen tool pen tool. Start placing points by clicking on the outline of your object. As you can see, because my foreground image is red, the shape we're creating with the pen will fill red. You will also notice that this action also places a new layer on top of the background, a layer named Shape 1.
This can become confusing if your selection is an irregular shape (most times), so I recommend you to go in the Layers palette and change the shape's fill or opacity to 0%:
If you used the polygonal lasso tool for selecting, you will notice that the pen tool works pretty much like it. But, unlike the lasso, you can undo each step if you didn't place the point right, you can press the space bar and hold it down while dragging with the mouse to scroll in the image, you can stop for switching to another program and take it from where you left it later. The lasso won't allow you to interrupt the selecting process and if you have a rather complicated selection, it can become tiring or accidents can happen (like to accidentally close the selection).
So, back to the pen selection: go back to the picture and continue adding points on the outline, until you return to where you started and close the shape. Once you closed the shape, the outline will change to a continuous line, like this:
Now, it's time to transform the shape into a selection: hold down the Ctrl key and, in the Layers palette, click the shape's thumbnail:
You will notice how the outline of the object in the picture will change into a selection outline.
Now, I will delete the Shape 1 layer, as it is no longer needed. With the selection active, click on the Background layer and hit Ctrl + j, which will place the car in a new layer. Hide the Background layer (click on the eye symbol) to examine your new cut object.
Of course, there is still some work to do: to "clear" the windows of the view from the other side. Use the same technique, but keep in mind that you will need to repaint in the reflections after you replace the background. I will leave the gray windows as they are. Keep the original file as reference in case you need to come back later.
(It's also a good idea to save your work!)
After cutting the windows out, it looks like this:
The only change from the steps above is that, after I make the selection and delete the Shape layer, I just hit Delete to cut the selected part form my layer with the car, then Ctrl + D to deselect. Because I use this very often, I created a custom action for all the steps that follow after I close my path. This way, I only click the run button and I get the result I need. This will save you a lot of time!
Here is how you can create a custom action for deleting parts that you selected with the pen tool:
1. After you closed the shape, go in the Actions palette and click the small arrow at the right side of the palette. it will open a menu.
2. Chose New set... and name it (My custom actions or just your name...)
3. Click the arrow again and chose New Action... Fill in a name (for instance, Deleting selection), make sure that the Set is the one you created at step 2, associate a function key if you want (this will allow you to just press that key to run the action, instead of clicking on the Play button in the Actions palette). Then click on Record.
4. You will notice a red dot in the Actions palette; this indicates that the action is being recorded: every step you make from now on will be recorded. So, follow these steps: Ctrl + click on the Shape's thumbnail from the Layers palette to select the shape.
5. Delete the Shape layer.
6. The new active layer automatically switches to the one you were selecting in.
7. Hit Delete.
8. Hit Ctrl + D.
9. In the Actions palette, hit the stop button (the square).
Now, you can dock the steps in the Action palette by clicking the arrow next to your new action. And, every time you need to transform a shape into a selection and have it deleted from the layer you're working in, just select the specific action and click the Play button (or press the key you set for it, if any).
Bringing in new background and foreground
Let's create a basic composition: we need a new sky and some grassy field for the background. Make a new document and bring them all in, on separate layers, then bring the car in too. Voila! (The beautiful sky picture was taken by my husband, Eric Levay.)
I made a 12 x 12 in @ 300 dpi new document, in which now I have 3 layers: the sky, the car, and the grass. I did some simple editing:
1. on the car: sharpening, curves, hue/saturation;
2. on the sky: hue/saturation, to match it better with the car colors;
3. on the grass: deleted the upper part, using the Eraser tool with a large slightly soft brush; hue/saturation to match it better with the car's rusty color.
Of course, everything looks just pasted together, and not like this could be one photograph. But we already did the first step towards blending: matching the colors of the photos coming together in the same image.
Blending the edges
This is a very important step in photo manipulation: when you cut parts of photos and place them on top of other photos, the edge is always sharp, as you can see below, in the 100% magnification:
Check any (unmanipulated) photograph at 100% and you will notice that always the edges are soft. Never, never leave a cut object in your manipulation without blending its edges!
The most common blending option is to feather the selection before you cut it out (using the Feather option from the Select menu). However, this tends to soften the edges too much, even when very low numbers are used. The method I'm using for blending edges is as follows:
1. Ctrl + click on the layer thumbnail of your object to select it.
2. In the Select menu, choose Modify -> Border and fill in 2 pixels.
3. Go to Filter -> Blur -> Gaussian blur and chose a very low value, between 0.5 and 2. I usually go with 0.7 but this varies from picture to picture and is mostly influenced by the image's resolution (as well as the width of the border!) Examine different parts of the image in the Preview window. Hit ok when you're pleased with the result.
4. Ctrl + D to deselect.
Since you will use this with every cut piece from your image, it's also a good idea to create a custom action that you can run any time you need it.
After a blended the edge of the car, it looks like this (100% magnification):
Shadows & foreground
Blending doesn't end with the margins. The car above looks obviously out of place, and not like it's in the grass. As you can see, the are some really dark shadows on the lower part of the car and, if you reference the original photo, you can notice how the shadows look on the ground. Also, it's necessary to bring some of the grass over the car. You can either select it from the layer and copy it in a new one, which you'll bring over the car layer, or you can copy the layer, bring it forward, and delete the parts not needed. Or just paint them in, clone them from the grass layer, the possibilities are endless. Also, don't forget about the reflections on the windshield I was mentioning when I cut the glass out.
For the reflections in the windshield, I created a new layer on top of the car layer, and, with a sponge-like brush set to low opacity, I painted a few strokes in the direction of the original ones. Then I applied the filter Motion blur, in the same direction.
To make the image a bit more dramatic, I created a vignette: in a new layer on top of the stack, make a circular selection and feather it to maximum (250). Ctrl + I to invert the selection, hit D to bring black as foreground color and Ctrl + Delete to fill the layer with the foreground color. Set the blending mode of the layer to Color Burn and lower the opacity of the layer until you're satisfied with the result.
For a slightly surreal effect of a "ghost car", I added some beams of light by creating a feathered selection of their shape in a new layer, filling it with yellow, and setting the blending mode to Lighten.
This image can be furthermore improved and spiced up, but for the purpose of this tutorial I consider it done.
I hope this has been helpful. Have fun!