INJECTORS ? HELP PLZ

[drifty325i]

I THINK MY INJECTORS ARE GETTIN A BIT WORN, SOMETIMES TAKES A BIT LONGER TO TURNOVER AND START WHEN THE ENGINES WARM. WHATS THE BEST THING TO DO? UPGRADE TO E36 ONES OR GET MY STOCK
ONES RECOND? OR GO TO MUSTANG ONES WHICH I HAVE HEARD WORK GOOD. CHEERS FOR ANY ADVICE GUYS.

CAR IS A 86 325I, ZONE CHIP, EXHAUST, POD WITH CUSTOM SEALED AIR BOX, WAS AUTO NOW MANUAL IF THAT MAKES ANY DIFF

[astondg]

I thought I had read that the E36 ones could be a bit too big for a close to standard M20. Maybe with the pod and zone chip they would be ok? What Mustang are you talking about? I think the ones in the 4.6L (I think?) V8 Mustangs would be fairly big, although I guess that isn't heaps more per cylinder than a 2.7L 6 cylinder.

You can get yours ultrasonic cleaned which might help.

Aston

[drifty325i]

yer i was thinkin i might just get them cleaned. hopefully this helps.
hay how do you find gettin performance parts for ya bm i ausy? there is hardly any of them over ther from wat ive seen.

[astondg]

I haven't really got any performance parts on mine and the ones that I have are just general stuff. I have a custom made exhaust, springs from an Australian spring manufacturer, Koni dampers, bushes and camber plates from Australian company K-Mac, and a standalone Engine Management System instead of a chip or something. All probably not the best stuff but seems to work ok. The only thing that should have been difficult was my 4.1 LSD but luckily I went to a mechanic that knew where he could get the parts from the 2L Touring Car series they used to have here and he built them into my diff housing . I imagine trying to find a Schrick camshaft or something would be a bit difficult, I did have a look for one a while ago without much luck. I guess with air freight and internet banking and stuff these days I could get parts from overseas.

Other parts are a bit harder, the general wreckers here don't usually have E30s, but I have just tried a German wrecking place here in Brisbane that seems to be ok and they are wrecking a few E30s so hopefully I'll be ok for a while.

Aston

[Widge]

If you ever want a Shrick cam or anything mate - I'll be more than happy to recieve it from ebay etc, check it's all there and post it out to you.

[astondg]

If you ever want a Shrick cam or anything mate - I'll be more than happy to recieve it from ebay etc, check it's all there and try it out / run it in for a year or two.

Yeah thanks .

Seriously, thanks that would be great. I'll see what happens.

Aston

[Widge]

PMSL


I've alreday got an Alpina cam mate, it's difficult enough finding time to put that in! Serousily no probs - Na worries mate