Carbon Fibre door cards *DEPOSITS NOW WANTED*

[SteMarsden]

Following another recent thread on here, a couple of people showed an interest in some carbon fibre front door / rear door/panel trims.

These can be viewed in the performance-trim website.
http://www.performance-trim.com/product ... oduct_id=6

I have had an email from Mike today confirming that there is still a 10% discount available for 5+ buys and a 15% discount for 10+.

Current prices are:
2 door front, 4 door front and 4 door rears £97.75
2 door rears £86.25

With 5 to 10 buyers (10% discount) this would be:
2 door front, 4 door front and 4 door rears £87.97
2 door rears £77.62

With 10 plus buyers (15% discount) this would be:
2 door front, 4 door front and 4 door rears £83.10
2 door rears £73.32

Postage on this would be circa £2 per person to my house (from Performance Trim as they wont send individually), and then Id post out at cost.

Prices HAVE gone up since the last thread as the company have become VAT registered, but (thanks to Gordon 'Scrooge' Brown VAT is now 15%).
Going to post a link to this on the PBMW forum as the more people we get the cheaper it'll will be.

Anyone else interested?
Although I know its not the most affluent time of year.....

Ste.

[rix313]

Interested 2 door fronts

[zerocool]

Im interested too

[ks652]

Im also interested

[lee]

interest too...but whats the price for a 4dr

[SteMarsden]

Lee,
If your buying for the front AND rears then that would be 2 x the higher price. Can you confirm whether you wants fronts AND rears?

So far so good:
1. Ste M
2. rix313
3. zerocool
4. ks652
5. lee

Thats (at least) the five sets needed for our 10% discount
Can the rest of you confirm whether you want 2 door fronts, 4 door fronts, 2 door rears and/or 4 door rears?


Ta.

[maxfield]

Would be interested in 2 door fronts.

[SteMarsden]

Lee,
If your buying for the front AND rears then that would be 2 x the higher price. Can you confirm whether you wants fronts AND rears?

So far so good:
1. Ste M - 2 door fronts
2. rix313
3. zerocool
4. ks652
5. lee - 4 door fronts?
6. Maxfield - 2 door fronts


Ta.

[m4xos]

very interested for the front and rear for a 2 door.

how do they fix???

[SteMarsden]

m4xos,
There is a link at the top of this thread which doesnt really show much, but, I was going to use a few short self tapping screws with bevelled washers so that it sits flush.
Ste.

[rix313]

I take it they'll come with the door handle inserts and window mechanism holes pre cut?

[SteMarsden]

As per the website, you can request any/all of those holes pre-cut ready for fitting.

[rix313]

Hot to trot?

[SteMarsden]

Lee,
If your buying for the front AND rears then that would be 2 x the higher price. Can you confirm whether you wants fronts AND rears?

So far so good:
1. Ste M - 2 door fronts
2. rix313
3. zerocool
4. ks652
5. lee - 4 door fronts?
6. Maxfield - 2 door fronts


Ta.

7. m4xox

Im looking for deposits now as I want to order these next Monday, PayPal me at @

the_marsdens@hotmail.co.uk

Or PM me for my address to send cash.

Anyone else interested to make it even cheaper?

Ste.

[325rick]

ste u got a pm

[JimmyC]

Fitted mine with velcro

They are a perfect fit and look great

[m4xos]

Hello, are these still available?? i need 2 fronts and 2 rears for a 2 door! cheers max

[rix313]

You can buy em direct mate

[flipper325]

Hi folks,

I started a group buy in the USA, but the factory said that anyone could join. We already have more than 10 people, so it'll be a 15% discount. If you've been waiting for another GB to lower the cost, here is your chance!

Here is the thread on the R3V forum, that I'm using as a focal point:

http://www.r3vlimited.com/board/showthread.php?t=147143

Alex

[m4xos]

so how much in english pounds for front and rears?? cheers

[flipper325]

so how much in english pounds for front and rears?? cheers

List price is £97.75 for the front, and £86.25 for rear quarter trims. Now subtract 15%

Here is the factory web site, with all the details:

http://www.performance-trim.com/product ... oduct_id=6

Alex

[nickso]

hmm could go for this too.

you want me to put my name up on the other thread?

going to get complicated running a UK delivery on a US group buy isnt it?

[flipper325]

hmm could go for this too.

you want me to put my name up on the other thread?

Sure. Or I'd be glad to -- as long as both of us don't do it.

going to get complicated running a UK delivery on a US group buy isnt it?

Not at all! I'm handling the bulk shipment to the US, and then distributing it. The factory will ships yours directly to you -- no difference from the UK group buy.

[nickso]

hmm could go for this too.

you want me to put my name up on the other thread?

Sure. Or I'd be glad to -- as long as both of us don't do it.

i dont have a profile on there so if you could put me down for a set of front and rears for a two door that would be great, either that or i could stop being lazy set a profile up tomorrow.

[m4xos]

i will definately have the front and rears too please! 100%

[flipper325]

i dont have a profile on there so if you could put me down for a set of front and rears for a two door that would be great, either that or i could stop being lazy set a profile up tomorrow.

i will definately have the front and rears too please! 100%

Cool! You both have been added to the list.

[flipper325]

i dont have a profile on there so if you could put me down for a set of front and rears for a two door that would be great, either that or i could stop being lazy set a profile up tomorrow.

i will definately have the front and rears too please! 100%

For the front panels, do you want the smaller 'race' version, or the larger 'street' version, covering the whole door? Also, I assume the standard 1.5 mm thickness, not 0.8 mm?

[m4xos]

i want the smaller race version please, and just the 1.5mm thick, cheers

[SteMarsden]

Put me down for a set of rear quarters in 0.8mm please as I have already had my fronts (and very nice they are too!)
Ste.
#40.

[nickso]

i dont have a profile on there so if you could put me down for a set of front and rears for a two door that would be great, either that or i could stop being lazy set a profile up tomorrow.

For the front panels, do you want the smaller 'race' version, or the larger 'street' version, covering the whole door? Also, I assume the standard 1.5 mm thickness, not 0.8 mm?

ill take the race 1.5mm front and back please.

[flipper325]

I just posted additional GB details on the R3V forum:

http://www.r3vlimited.com/board/showpos ... ostcount=1

Alex

[flipper325]

Folks,

I have a favor to ask of you. For several days, I've been trying to get a hold of Mike (the owner of Performance Trim), without success. He hasn't responded to e-mails from several interested buyers in the US, nor my e-mails and voice-mails.

I've talked to Mike a couple of times on the phone early on, and he promptly responded to my initial e-mails, but now I'm getting concerned about proceeding with this GB. Since it's a bit of a pain for me to call him from the US, can you try calling him?

Also, have any of you in the UK already made a payment?

TIA,
Alex

[nickso]

hi, i was starting to get a bit concerned myself.

i copied you in to my email as requested but i havent recieved a reply or made any payments as the email i sent was to confirm the total price per your instructions.

i was going to wait until monday, in case he was away last week, and see if he replied.

[flipper325]

hi, i was starting to get a bit concerned myself.

i copied you in to my email as requested but i havent recieved a reply or made any payments as the email i sent was to confirm the total price per your instructions.

i was going to wait until monday, in case he was away last week, and see if he replied.

Yep, I saw your e-mail. Hold off on your payment until we straighten this out.

If this deal falls through, I found another source in the US, that can make these panels for the same price. Of course the shipping situation would be reversed for you guys in the UK.

[nickso]

If this deal falls through, I found another source in the US, that can make these panels for the same price. Of course the shipping situation would be reversed for you guys in the UK.

bloody postage.

i may have to forget it and revert to plan A if thats the case. shame as ive already sorted out some fixings.