How's it Looking?
Moderator: martauto
-
djk
- E30 Zone Addict

- Posts: 2389
- Joined: Wed Mar 19, 2008 11:00 pm
- Location: Hertfordshire
Is it just the different rear arches, or did chromies have totally different springs - my facelift moredoor has standard, non-mtech, suspension and it doesn't look that high. I don't normally go in for lowering, but your chromie really is on stilts!
It is a nice old thing though - black chromies with no extra tat just look so right. The only thing I might be tempted to do would be add the OE 'se' chin spoiler (not the mtech valance) - the one my cabby has, there's a good pic of one on capri_rob's bronzit chromie in his sig, though his has oil cooler holes as its a 325.
It is a nice old thing though - black chromies with no extra tat just look so right. The only thing I might be tempted to do would be add the OE 'se' chin spoiler (not the mtech valance) - the one my cabby has, there's a good pic of one on capri_rob's bronzit chromie in his sig, though his has oil cooler holes as its a 325.

"doughnuts - power braking in circles" Peterborough Evening Telegraph
-
Ollie_bwoii
- Married to the E30 Zone

- Posts: 8695
- Joined: Sat May 17, 2008 11:00 pm
- Location: Northampton
May lower it in the future!
I would have one of those spoilers but I would have to change to the later front valance as well, And I actually quite like the one it has!
Also does any know how to gain access to fit fog lights? Remove valance? Remove inner arch panel?
I would have one of those spoilers but I would have to change to the later front valance as well, And I actually quite like the one it has!
Also does any know how to gain access to fit fog lights? Remove valance? Remove inner arch panel?
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
Ollie, this is an original pre facelift spoiler. No need to change the valance.

and with it fitted.

Re the foglights. Open bonnet, remove the two black plastic covers in front of the headlights. That should give you access to the loom part iirc. The aperture for the fogligts themselves is probably covered by a blanking plate, just unscrew, or prise out
and all should be clear.

and with it fitted.

Re the foglights. Open bonnet, remove the two black plastic covers in front of the headlights. That should give you access to the loom part iirc. The aperture for the fogligts themselves is probably covered by a blanking plate, just unscrew, or prise out
and all should be clear.
Last edited by gooner1 on Wed Jul 29, 2009 10:40 pm, edited 1 time in total.

-
pac1982
- Engaged to the E30 Zone

- Posts: 5330
- Joined: Fri Mar 07, 2008 11:00 pm
- Location: isle of wight
That look sexual!

1991 BMW E30 318i Neon Design Convertible (Sold)
1990 BMW E30 325i Touring (Sold)
1990 BMW E30 318IS (Sold)
1990 BMW E30 316i (RIP)
-
Ollie_bwoii
- Married to the E30 Zone

- Posts: 8695
- Joined: Sat May 17, 2008 11:00 pm
- Location: Northampton
I think though gooner its for the later chromie valance and not the early one! One is deeper than the other!
And I will have a look tommorrow if what you said about getting to the fog lights is correct! So thanks for the help!
And I will have a look tommorrow if what you said about getting to the fog lights is correct! So thanks for the help!
-
djk
- E30 Zone Addict

- Posts: 2389
- Joined: Wed Mar 19, 2008 11:00 pm
- Location: Hertfordshire
Really? I'm sure Andyboy fitted one to the B-reg TBMW project chromie last year, wouldn't that have had the 'earlier' valance, saying that I guess he might have changed it - they bolt on don't they? Have to say I though they were all the same, but chromies aren't really my area of expertise.Ollie_bwoii wrote:I think though gooner its for the later chromie valance and not the early one! One is deeper than the other!
And I will have a look tommorrow if what you said about getting to the fog lights is correct! So thanks for the help!

"doughnuts - power braking in circles" Peterborough Evening Telegraph
-
Ollie_bwoii
- Married to the E30 Zone

- Posts: 8695
- Joined: Sat May 17, 2008 11:00 pm
- Location: Northampton
I think andy changed his because originally it had the early valance with the black plastic fog light blanks, but then it had the later one with painted blanking plates!
There definately is a difference!
There definately is a difference!
-
ImysE30
- Married to the E30 Zone

- Posts: 22478
- Joined: Mon Jul 07, 2008 11:00 pm
- Location: Derby Massive!!
Current Fleet:
E30 335i Turbo M3 Convertible Replica
E30 335i Turbo M3 Convertible Replica
-
Ollie_bwoii
- Married to the E30 Zone

- Posts: 8695
- Joined: Sat May 17, 2008 11:00 pm
- Location: Northampton
It won't fit! Early front valance is not as deep as the later!

-
ImysE30
- Married to the E30 Zone

- Posts: 22478
- Joined: Mon Jul 07, 2008 11:00 pm
- Location: Derby Massive!!
It says it came off a 84 car though? 
Current Fleet:
E30 335i Turbo M3 Convertible Replica
E30 335i Turbo M3 Convertible Replica
-
Ollie_bwoii
- Married to the E30 Zone

- Posts: 8695
- Joined: Sat May 17, 2008 11:00 pm
- Location: Northampton
Typical Ebayer, doesn't know what they are talking about! 
-
ImysE30
- Married to the E30 Zone

- Posts: 22478
- Joined: Mon Jul 07, 2008 11:00 pm
- Location: Derby Massive!!
Sounds about right, no doubt someone will buy it though 
Current Fleet:
E30 335i Turbo M3 Convertible Replica
E30 335i Turbo M3 Convertible Replica
-
capri_rob
- Married to the E30 Zone

- Posts: 9678
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
Ollie_bwoii wrote:It won't fit! Early front valance is not as deep as the later!
Maybe you'll just have to "Tech1" it then

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
Ollie_bwoii
- Married to the E30 Zone

- Posts: 8695
- Joined: Sat May 17, 2008 11:00 pm
- Location: Northampton
I like the one that is on it! Nice and original looking! Will hopefully soon have some fog lights in it! 
-
Alex
- Married to the E30 Zone

- Posts: 22665
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
-
mathieud60
- E30 Zone Newbie

- Posts: 44
- Joined: Wed Nov 05, 2008 11:00 pm
- Location: France
Amazing work. Your car looks so great now 
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Felix79 wrote:Stains are pretty easy to get rid of. Any good wet vac with some decent chemicals will shift the most stubbern of stains. The biggest trick is obviously clean well before fitting in and make sure it is well dry before fitting. Dad uses a George vac ( they have the face on them and it's green ) and will use a dish brush and nail brush and scrub the seats with the detergent mixture to get deep into the cloth. He used this method on my houndstooth to get it back to mint condition and it just needs a hover every few weeks to keep on top of it.
If your interier has a rip on the grey cloth it can be fixed pretty easy and it will do your car wonders with that trim. Dans M52 beast has the same as your but with highbacks. Santapod is only round the corner or try and do a meet we both can be at before hand ( could even pop up to say hello ) and I be happy to give you some headrests that are in the same grey as the bolsters and see if we can salvage the material. And I guess you can have a look at the Alpina if you really want to ( don't want to bore you with it lol )
'Some' stains just dont come out
My seats are the facelift cloth Felix, diagonal flock or whatever its called
Its a classic trim and suits your car Ollie but its really not worth spending much money on as standard seats are never really desirable
-
Tedswagon
- E30 Zone Addict

- Posts: 2195
- Joined: Sun Nov 23, 2008 11:00 pm
- Location: Edinburgh
Alex, great link. I'm looking for material for my tatty sport seats - they had it on this site!Alex wrote:ollie is this any good for you, seen it the other day
http://www.bmminiparts.com/PartDetails. ... 00167FA5D2
if you plan on keeping the original seats
Sorry of off topic Ollie - your car look great btw.
-
Ollie_bwoii
- Married to the E30 Zone

- Posts: 8695
- Joined: Sat May 17, 2008 11:00 pm
- Location: Northampton
Tanks fo rthe nice comments!
Dan I am not going to spend money on me cr4ppy comfort seats, I want soe mcloth sports seats, But other jobs have priority!
Dan I am not going to spend money on me cr4ppy comfort seats, I want soe mcloth sports seats, But other jobs have priority!

