eta krank/rev

[nikos]

what is the max. rev for the 2.7 conv. without breaking the motor?
anyboby knows? thank you

[bigdek]

read somehere about 6000 max

[Karan]

what is the max. rev for the 2.7 conv. without breaking the motor?
anyboby knows? thank you

my 2.7 had a new eta crank in it when it was built and has 90k miles on it in a high state if tune and it hasnt broken yet and can spin up to 7k nicely. but i dont bother and just change at 6k max usually

[Templ8e30]

I heard that the eta crank is safe up to 6200rpm continuous. Above that the crank can twist between the webs.

I usually change around 6000 as well.

Cheers,

Iain T

[M5pilot]

Karan's has been revved passed 6500 alot and it hasnt had a problem.

[Karan]

as long as the crank and everything was balnced and tolerances were spot on when the engine was assembled i dont see a problem in revving way past 6k

[Simon13]

C2's had the steel crank for a reason!!!

[Templ8e30]

:yeahthat:

Cheers,

Iain T

[nikos]

thank you everybody
I set the rev limiter on 6200 and see you in two weeks time, vacation time has arrived
Nikos

[rowemeister]

Mine spins up to 7000 and I am convinced it will go past that.

Maybe its because Hartge forged there own crank.

Im sure M5Pilot will know!