Where abouts it the ABS light on the dash? My car failed its mot because the abs light doesnt come on and off on start up. Turns out i didnt have any sensors on the front so ive added them but now i cant see the light to check.
A simple check is to just slam on and see if i skid. The car will not skid but yet i dont feel and judder under the brake pedal.
The car is booked back in for its mot on monday and it needs to pass or im screwed getting to work. if i have sensors in and it isnt working what am i best to do? get a new control unit and pump?
oh my car is a 320se but its got the m20b27 engine just in case it changes anything
Thanks in advance
Richard
where is the ABS light on the dash? ABS not working!
Moderator: martauto
-
Rickbmw1984
- E30 Zone Newbie
- Posts: 96
- Joined: Fri Apr 17, 2009 11:00 pm
hmmm well that doesnt light up on my car but yet i have all the sensors now plugged in....damn it!
any ideas?
any ideas?
-
Rickbmw1984
- E30 Zone Newbie
- Posts: 96
- Joined: Fri Apr 17, 2009 11:00 pm
well im guessing thats why the previous owner had removed the sensors. but saying that he had changed the suspension over so thought he may have just forgotten. It passed the last mot ok and now it fails.
i should check the bulb before going round changing pumps n that!
i should check the bulb before going round changing pumps n that!
-
gareth
- E30 Zone Team Member
- Posts: 11009
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
it's possible to get the abs bulb and oil pressure bulb to accidentally light up in the wrong holes should you really need to 
Sole founder of Fe2O3-12V it's a lifestyle
LSD rebuilding / modification services provided, PM for details
LSD rebuilding / modification services provided, PM for details
-
gareth
- E30 Zone Team Member
- Posts: 11009
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
the answer beat you to that question....bodger wrote:whats the green light under the fuel gauge for
Jon_Bmw wrote:Dan the shame, you have your front fogs on!
Sole founder of Fe2O3-12V it's a lifestyle
LSD rebuilding / modification services provided, PM for details
LSD rebuilding / modification services provided, PM for details
-
gareth
- E30 Zone Team Member
- Posts: 11009
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
so they are... 
i've just been out to look at my spare dash cluster in the garage and that light segment is there, is green and has no markings on the lense. on the back of the dash there is a marking showing a circular arrow...
traction control?
i've just been out to look at my spare dash cluster in the garage and that light segment is there, is green and has no markings on the lense. on the back of the dash there is a marking showing a circular arrow...
traction control?
Sole founder of Fe2O3-12V it's a lifestyle
LSD rebuilding / modification services provided, PM for details
LSD rebuilding / modification services provided, PM for details
-
Rickbmw1984
- E30 Zone Newbie
- Posts: 96
- Joined: Fri Apr 17, 2009 11:00 pm
well just to let you know i went with the oil pressure option and now i have perfect working abs *cough*
Passed my mot now too! after its third fail!
Got pulled by the police driving to collect a drivers seat but a £60 fine is nothing compared to the feeling i now have of having a legal car back on the road
So all in all ive had to do the following.
All new discs and pads
handbrake adjustment
emmissions as they were well too high.
drivers seat in secure so new seat put in.
ABS not working so bodged the electrics.
Hardly any bulbs on the car so added all new bulbs all round.
Exhaust was insecure so bracketed that up.
All in all it was worth it as i now have a car that passed with flying colours! haha
Thanks for your help
Passed my mot now too! after its third fail!
Got pulled by the police driving to collect a drivers seat but a £60 fine is nothing compared to the feeling i now have of having a legal car back on the road
So all in all ive had to do the following.
All new discs and pads
handbrake adjustment
emmissions as they were well too high.
drivers seat in secure so new seat put in.
ABS not working so bodged the electrics.
Hardly any bulbs on the car so added all new bulbs all round.
Exhaust was insecure so bracketed that up.
All in all it was worth it as i now have a car that passed with flying colours! haha
Thanks for your help
I have an MOT coming up and know for a fact that the ABS bulb has been disconnected as it shows red all the time. I assumed this had been done to get it through a previous MOT. If ABS is fitted to the car does it have to work to pass MOT?
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
No, doesn't have to work, as there's no way of testing it - no road test in a UK MOT test.kman82 wrote:I have an MOT coming up and know for a fact that the ABS bulb has been disconnected as it shows red all the time. I assumed this had been done to get it through a previous MOT. If ABS is fitted to the car does it have to work to pass MOT?
The warning light does have to do what it's supposed to do, though.
What EXACTLY does your light do. Most ABS faults are easily cured.
Brian
Have looked into this fault in more detail after replacing my instrument cluster at the weekend. The ABS light goes off after starting the car then comes back on 20 yards down the road. Assuming a sensor problem.
Have checked the resistance at each connector and the front left didn't give me any reading at all which would suggest the problem lies there?
Whats the next step for me? Theres no obvious signs of cracks or tears but it does look a little old and brittle. Do i just replace the sensor? Does it just pull out from the hub?
Have looked into this fault in more detail after replacing my instrument cluster at the weekend. The ABS light goes off after starting the car then comes back on 20 yards down the road. Assuming a sensor problem.
Have checked the resistance at each connector and the front left didn't give me any reading at all which would suggest the problem lies there?
Whats the next step for me? Theres no obvious signs of cracks or tears but it does look a little old and brittle. Do i just replace the sensor? Does it just pull out from the hub?
Are you sure you are measuring the right part of the connector? To not give any resistance on all of them is unlikely. I am sure you are, but just to check, you are measuring the sensor side of the yellow plugs rather than the ABS ecu side?
They should read around 1000ohms and anything substancially different is likely to indicate a fault.
They should read around 1000ohms and anything substancially different is likely to indicate a fault.
yeah mate, sorry probably not made that very clear. I checked them all sensor side in the connector. Back two and front right all measure about 1100 ohms. Front left gives no reading at all
Sorry, I have read your post properly now. 
It was perfectly clear, except it didn't account for an idiot like me. 
Yes the front left is the sensor that normally goes in my experience. I suspect its because its the NS and collects crude in and around the ABS ring and sensor. As it is reading open circuit you are pretty much guarenteed you need a new sensor, expect to pay around £10-20 for a second hand one and probably approaching £100 for a new one.
They are held by a simple allen key bolt and just pull out. It is worth cleaning the ABS ring as well, whilst you are grovelling about underneath.
After a 'new' sensor is fitted there is no reset procedure or anything like that.
It was perfectly clear, except it didn't account for an idiot like me. Yes the front left is the sensor that normally goes in my experience. I suspect its because its the NS and collects crude in and around the ABS ring and sensor. As it is reading open circuit you are pretty much guarenteed you need a new sensor, expect to pay around £10-20 for a second hand one and probably approaching £100 for a new one.
They are held by a simple allen key bolt and just pull out. It is worth cleaning the ABS ring as well, whilst you are grovelling about underneath.
After a 'new' sensor is fitted there is no reset procedure or anything like that.
If you have time on your hands you could check the wiring to the sensor to make sure its not fractured, but for the hassle its usually worth just getting another one off one of the reputable traders off here.
Righty. I'll try and acquire a 'new' one then. thanks
Another quick question.... Will any age ABS sensor work with my 88 325i cabby? I believe its pre facelift and may have the early ABS ecu. Are they interchangeable
I've been searching on there all morning for the sensors but cant find them.
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
No age related change in the sensors, AFAIK. The old and new ABS ECUs are interchangeable as well, although an early one fitted to a late car might fall victim to a voltage surge at some time.
ABS sensors 'just pull out' in the same way that rear beam bushes do! Some might come out easily, but others will have effectively welded themselves in position!
ABS sensors 'just pull out' in the same way that rear beam bushes do! Some might come out easily, but others will have effectively welded themselves in position!
hmmm. 'effectively welded' doesn't sound great. We shall wait and see, i'll wait until i get a replacement sensor before i try persuading. I'll keep you posted
Just a quick update, a bought a second hand sensor off ebay from a '91 325i for £13 and fitted it this morning - no more ABS light!!