325i Relays
Moderator: martauto
- pimp_mobile
- E30 Zone Newbie

- Posts: 30
- Joined: Sat Feb 16, 2008 11:00 pm
What does the blue relay do that is situated with the DME (White) and Fuel Pump (orange) relays? On mine these three sit in a black box attached to the passenger side bulk head.
-
e301988325i
- E30 Zone Addict

- Posts: 3701
- Joined: Fri Feb 01, 2008 11:00 pm
- Location: Taunton, Somerset
Lambda sensor heater element relay
I said:
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
- pimp_mobile
- E30 Zone Newbie

- Posts: 30
- Joined: Sat Feb 16, 2008 11:00 pm
Cheers.
Will it have a lambda sensor if it doesn't have a cat?
Will it have a lambda sensor if it doesn't have a cat?
- Brianmoooore
- E30 Zone Team Member

- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
Only if it's been modified to run on LPG.
- pimp_mobile
- E30 Zone Newbie

- Posts: 30
- Joined: Sat Feb 16, 2008 11:00 pm
Hmmm... so what does the middle relay do then as it hasn't been modfied and it doesn't have a Cat and never has done. There are wires coming out the bottom of the socket so its connected to something(!)
Apologies I thought I'd put a date for my car... its 1990-91 (H reg)
Apologies I thought I'd put a date for my car... its 1990-91 (H reg)
sorry for the hijack but comeing out of my relay box i have a long green wire thats been cut, ive tried running the car with them cut adn with them joined and it makes no difference to how it runs. any ideas on what that could be?

- Brianmoooore
- E30 Zone Team Member

- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
Shouldn't be any plain green wires going to the box with the three relays. Plain green is unfused ignition switched live, and doesn't go anywhere near these relays.yeah_mick wrote:sorry for the hijack but comeing out of my relay box i have a long green wire thats been cut, ive tried running the car with them cut adn with them joined and it makes no difference to how it runs. any ideas on what that could be?
- Brianmoooore
- E30 Zone Team Member

- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
Wiring for a cat is all there, whether it has one or not.pimp_mobile wrote:Hmmm... so what does the middle relay do then as it hasn't been modfied and it doesn't have a Cat and never has done. There are wires coming out the bottom of the socket so its connected to something(!)
Apologies I thought I'd put a date for my car... its 1990-91 (H reg)
If the relay is fitted, all it will be doing is switching power to the lambda sensor socket under the battery tray.
i also have a stray thing wire comeing off the loom below the throttle body. the end looks like its been stripped as there is no insulation, i earthed it and it done nothing but when connected to a live feed it turned the ignition on
at the moment its just floating. any ideas on that?
at the moment its just floating. any ideas on that?

- Brianmoooore
- E30 Zone Team Member

- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
There's a spare socket in this area for an emissions control solenoid valve, but without EXACT wire colours, I can't say for sure.

