Afternoon all,
I have a diff and drive shafts sitting in the garage that were taken from an E32 735i 6 cylinder car that I think was an auto. Just wondered how I would go about finding out the ratio of this particular diff?
Any help appreciated,
Cheers
Diff question.
Moderator: martauto
-
Phatz
- E30 Zone Regular
- Posts: 799
- Joined: Sat Apr 02, 2005 11:00 pm
- Location: Hemel Hempstead, Hertfordshire
The Sport - Gone to a new home to be slowly brought back to life
-
Phatz
- E30 Zone Regular
- Posts: 799
- Joined: Sat Apr 02, 2005 11:00 pm
- Location: Hemel Hempstead, Hertfordshire
Anyone?
The Sport - Gone to a new home to be slowly brought back to life
-
leeparkes
- Married to the E30 Zone
- Posts: 9535
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
I take it the tag is missing off the back of the diff.
You can find out the ratio of the diff by marking a point on the input flange and output flanges(tippex),count how many turns it takes on the input flange to turn the output flanges 360 degree.
ie,3.64 turns = 3.64 ratio
You can find out the ratio of the diff by marking a point on the input flange and output flanges(tippex),count how many turns it takes on the input flange to turn the output flanges 360 degree.
ie,3.64 turns = 3.64 ratio
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
Phatz
- E30 Zone Regular
- Posts: 799
- Joined: Sat Apr 02, 2005 11:00 pm
- Location: Hemel Hempstead, Hertfordshire
Yeah the tag is missing, however I will have a go at doing what you suggested.
Cheers Leeparkes.
Cheers Leeparkes.
The Sport - Gone to a new home to be slowly brought back to life