5 series wheels

Post Sat Jun 06, 2009 7:31 pm

are two, possibly three of these any use to anyone?

Post Sat Jun 06, 2009 7:36 pm

Barx325i wrote:are two, possibly three of these any use to anyone?

I could be interested mate. They 5x120..?

You after much for them?

And where abouts in cheshire are you?

Thanks

Chris

Post Sat Jun 06, 2009 7:42 pm

5x120 yes, I'll ask & get back to you.. I'm based near tarporley..

They're 1 piece just so you know. I found out, as one was so badly bent, the tire was off & it looked like a first attempt at spinning a clay vase - all shapes

Post Sat Jun 06, 2009 7:47 pm

how much you after for them. these will go lovely on my 6 i also have a brand new spare so can make a set are they curbed etc. also are they 8j's all round or 9j rears and which ones are damaged? thanks

Post Sat Jun 06, 2009 7:50 pm

bmw-mad wrote:how much you after for them. these will go lovely on my 6 i also have a brand new spare so can make a set are they curbed etc. also are they 8j's all round or 9j rears and which ones are damaged? thanks

y'know it didn't occur to me to check, but thinking about it I'm sure the dish was a tiny bit wider on the rear. nsf was mangled

Post Sat Jun 06, 2009 7:50 pm

Barx325i wrote:
bmw-mad wrote:how much you after for them. these will go lovely on my 6 i also have a brand new spare so can make a set are they curbed etc. also are they 8j's all round or 9j rears and which ones are damaged? thanks
y'know it didn't occur to me to check, but thinking about it I'm sure the dish was a tiny bit wider on the rear. nsf was mangled

how much would you want for them?

Post Sat Jun 06, 2009 7:55 pm

depends on the price I get from the breaker, I'll not be adding much for my travel & getting a bit dirty.

I'll check they're round etc & come back to you..

Post Sat Jun 06, 2009 8:02 pm

Barx325i wrote:depends on the price I get from the breaker, I'll not be adding much for my travel & getting a bit dirty.

I'll check they're round etc & come back to you..

ok that would be great if you can get a few pics while your there that would be spot on. Do you knw when you will be there next? just drop me a pm when you have any more info thanks

Post Sat Jun 06, 2009 8:05 pm

bmw-mad wrote:
Barx325i wrote:depends on the price I get from the breaker, I'll not be adding much for my travel & getting a bit dirty.

I'll check they're round etc & come back to you..
ok that would be great if you can get a few pics while your there that would be spot on. Do you knw when you will be there next? just drop me a pm when you have any more info thanks

indeed, I should know tomorrow..

Post Sat Jun 06, 2009 8:05 pm

Barx325i wrote:
bmw-mad wrote:
Barx325i wrote:depends on the price I get from the breaker, I'll not be adding much for my travel & getting a bit dirty.

I'll check they're round etc & come back to you..
ok that would be great if you can get a few pics while your there that would be spot on. Do you knw when you will be there next? just drop me a pm when you have any more info thanks
indeed, I should know tomorrow..

i cant tell in the pic but they are on a e34 right?

Post Sat Jun 06, 2009 8:13 pm

I think an e39 - pretty sure

they're not meant to be on that car I know that for sure

Post Sat Jun 06, 2009 9:17 pm

Those are style 5s. Originally fitted to E 31 8s and E39 5s. So they probably were meant to be on that car. If E 39 fitment, you need hubcentric rings to fit them on your E 24.

Post Sat Jun 06, 2009 9:56 pm

cecotto479 wrote:Those are style 5s. Originally fitted to E 31 8s and E39 5s. So they probably were meant to be on that car. If E 39 fitment, you need hubcentric rings to fit them on your E 24.

I think you must be right there, thanks for the info Cecotto,

Could they be staggered, do you know?

Post Sat Jun 06, 2009 10:02 pm

If from an E31 - staggered 8J front and 9J rear, if from an E39 either staggered or 8J all round.

I'll buy them if nobody else wants them whichever they are if they're cheap enough and you don't waste my time. Again.

Post Sat Jun 06, 2009 10:08 pm

cecotto479 wrote:If from an E31 - staggered 8J front and 9J rear, if from an E39 either staggered or 8J all round.

I'll buy them if nobody else wants them whichever they are if they're cheap enough and you don't waste my time. Again.

the thought had crossed my mind actually

Post Sat Jun 06, 2009 10:09 pm

Barx325i wrote:I think an e39 - pretty sure

they're not meant to be on that car I know that for sure

no worries mate just pm me a price and some pics when you can tommorow thanks

Post Sat Jun 06, 2009 10:11 pm

bmw-mad wrote:
Barx325i wrote:I think an e39 - pretty sure

they're not meant to be on that car I know that for sure
no worries mate just pm me a price and some pics when you can tommorow thanks

yep shall do..

Post Sat Jun 06, 2009 11:27 pm

which breakers are they at? car transplants or something? if they are 8j they may not be any good for me. Let me know about them anyway.

Post Sun Jun 07, 2009 9:37 pm

They are two piece as well.

And they look like 8J all round, yet to see an e39 with 9J on the back from factory.

Post Wed Jun 10, 2009 10:33 pm

they are also ALL bent.

Post Wed Jun 10, 2009 11:41 pm

Bob_S wrote:they are also ALL bent.

cheers Bob saved me a job I guess, but I'll have a check..

It's not like you to snipe from your archair with clever comments though, what's that all about?

Post Thu Jun 11, 2009 12:46 am

Barx325i wrote:
Bob_S wrote:they are also ALL bent.
cheers Bob saved me a job I guess, but I'll have a check..

It's not like you to snipe from your archair with clever comments though, what's that all about?

They have been sat in the yard for a good 12/18 months and obviously been free wheeling and as I recall one was completely facked, and I recall the other 3 twisted as I considered them for mine

Post Thu Jun 11, 2009 11:24 pm

Are these the wheels on that E39 touring fatality that looks to have been pushed off a cliff?

Post Thu Jun 11, 2009 11:33 pm

Where is this breaker

Post Thu Jun 11, 2009 11:47 pm

They wont fit your car gareth

Post Thu Jun 11, 2009 11:54 pm

I have a e39 but I dont wont those wheels. The yard have a e30 I understand?.

Post Thu Jun 11, 2009 11:54 pm

I may be interested though - depending on price!

Please pm me when price obtained

Post Fri Jun 12, 2009 9:46 am

DanThe wrote:Are these the wheels on that E39 touring fatality that looks to have been pushed off a cliff?

indeed - one is good, one is salvageable / straigtenable, the other two diagonal opposites are torn..

Post Fri Jun 12, 2009 10:41 am

Also a couple interior bits from the e39 touring may be useful to me.
Anyone going to give me a clue, you all seem to go!.

Post Fri Jun 12, 2009 10:51 am

gaz it's ticket only

Post Fri Jun 12, 2009 10:39 pm

Dont want a ticket, just some parts, been waiting a week for you to come back to me.
Where is this breakers?.

Post Fri Jun 12, 2009 11:12 pm

pm sent Gaz

Post Sat Jun 13, 2009 1:00 am

clywd breakers, ruthin, near wrexham

Post Sat Jun 13, 2009 10:42 am

Bob_S wrote:clywd breakers, ruthin, near wrexham

wrong again unfortunately Bob, Ruabon not Ruthin, but a good 6/10 at least for that one

Post Mon Jun 15, 2009 7:32 pm

Barx325i wrote:
Bob_S wrote:clywd breakers, ruthin, near wrexham
wrong again unfortunately Bob, Ruabon not Ruthin, but a good 6/10 at least for that one

Like, same difference not like Wales is that big really is it.

Hows your m50 coming along?

p.s don't you live in Wrexham?