325i Parts.

Post Sat May 30, 2009 8:05 pm

Hi

Could I get a quote for a headgasket, pistons + rings for a '87 325i? All standard sizes.

Also, how much are new injectors?

Thank you.

Post Tue Jun 02, 2009 11:01 am

Do I need any more information?

Post Wed Jun 03, 2009 12:00 pm

bump?

Post Wed Jun 03, 2009 12:36 pm

Hi there

just to be sure if you can let me have chassis number

Thanks

Brett

Post Wed Jun 03, 2009 3:59 pm

The engines not the original engine in the car. It came from an older E30. Is there anything else I can get you?

Post Thu Jun 04, 2009 2:00 pm

I have just looked into this part numbers change 9/87

the pison makes avalible are Mahle or KS

both makes of piston have 2 sizes listed as standard diameter 83.980mm or 84.060mm

Mahle also list 1 with height 73.63mm with the above diameter

so i make that a choice of 12 pistons

Post Thu Jun 04, 2009 2:40 pm

NayC wrote:The engines not the original engine in the car. It came from an older E30. Is there anything else I can get you?

pm me your engine number, if its similar to mine, use my chassis number to order parts?

Post Thu Jun 04, 2009 4:07 pm

OK, this may take some time to organise...

Can I get a quote just for a head gasket if possible? pre-facelift engine, never had the head skimmed so the 1.75mm one?

And a cambelt as a spare (whole waterpump + everything is less than 50 miles, so a spare belt incase I disturb it from its slumber!)

Oh and A1BMW325iSport, Cheers mate, If it comes down to it then I'll keep your offer in mind.

Post Mon Jun 08, 2009 3:22 pm

Hi There

gasket £65.46
belt £16.87

Prices inc. VAT delivered to mainland UK
Please call us on 01242 257999 and quote 49432

Thanks

Brett