will M52 328I injectors fit into a e30 325i?

Need technical Q/A then you're in the right place

Moderator: martauto

Post Reply
325isporttech1
E30 Zone Camper
E30 Zone Camper
Posts: 1196
Joined: Sat Feb 14, 2009 11:00 pm
Location: Telford, Shropshire
Contact:

Fri May 15, 2009 8:57 pm

Hi guys i found a site ages ago that said m52 injectors can be put into the 325i as a direct replacment and as such make the injectors silent and makes the engine more efficient, just wondered if anyone has any knowledge of this?
rix313
E30 Zone Team Member
E30 Zone Team Member
Posts: 4942
Joined: Fri Oct 31, 2008 11:00 pm
Location: Silverstone
Contact:

Fri May 15, 2009 9:32 pm

I'd suspect they do.

Not sure if they'd over fuel though the flow rate might be higher.
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28641
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs
Contact:

Fri May 15, 2009 9:42 pm

They do fit straight in, but the engine will over fuel, they are not silent though trust me!
325isporttech1
E30 Zone Camper
E30 Zone Camper
Posts: 1196
Joined: Sat Feb 14, 2009 11:00 pm
Location: Telford, Shropshire
Contact:

Fri May 15, 2009 9:55 pm

lol any other sugestions in the injector department then?
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28641
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs
Contact:

Fri May 15, 2009 10:09 pm

The closest flow rate E36 injectors are from the E36 320i, they give a better atomisation of the fuel but unless yours are shagged I doubt they would be quieter
Reflex
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Thu Mar 06, 2008 11:00 pm
Location: N.W. London

Sat May 16, 2009 12:12 am

what about for a 327 with uprated fuel pump?
There Was A Time Last Year When I Was 17, But I'm 19 Now... And Things Have Changed

http://photos-h.ak.fbcdn.net/photos-ak- ... 778999.jpg
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28641
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs
Contact:

Sat May 16, 2009 12:16 am

Dont quote me on this but I believe the 2.7 builds just use the standard M20B25 injectors, the next flow rate up though are M50B25 injectors
Post Reply