would like to know what the above spoilers are and if they are worth anything
what spolier is this?
Moderator: martauto
-
BMWAlpinaC2
- E30 Zone Regular
- Posts: 623
- Joined: Sat Sep 13, 2008 11:00 pm
They're standrd cabby M Tech-2 spoilers. They look exactly like Tech-2s so my moneys on that, its even got the little indent on the right I think? 
-
mrLEE30
- E30 Zone Team Member
- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
cabby tech 2 spoiler????first time i have ever heard such a thing.... thought (to the point of being quite sure) there was only 1 type of mtech 2 spoiler.
this appears to be a mtech 2 copy, the lower part of the spoiler should curve upwards to match the lines of the upper part, your appears to be the standard plastic/rubber boot spoiler with a second tech 2 copy added on top. The join where they meet at each edge of the upper and lower spoiler also do not appear standard
the orginials normally had M Technic stuck in a small recess just above the ''5'' of your 325 badge.
you can see a picture below of the badge and note the curve on the lower part of the spoiler.
as for its value somewhere around 10-20quid if copy or 30-50 quid if original.
good luck!!
this appears to be a mtech 2 copy, the lower part of the spoiler should curve upwards to match the lines of the upper part, your appears to be the standard plastic/rubber boot spoiler with a second tech 2 copy added on top. The join where they meet at each edge of the upper and lower spoiler also do not appear standard
the orginials normally had M Technic stuck in a small recess just above the ''5'' of your 325 badge.
you can see a picture below of the badge and note the curve on the lower part of the spoiler.
as for its value somewhere around 10-20quid if copy or 30-50 quid if original.
good luck!!
-
BMWAlpinaC2
- E30 Zone Regular
- Posts: 623
- Joined: Sat Sep 13, 2008 11:00 pm
You know what I mean, I heard there were different kits for cabs and incidently assumed that there were different...mrLEE30 wrote:cabby tech 2 spoiler????first time i have ever heard such a thing.... thought (to the point of being quite sure) there was only 1 type of mtech 2 spoiler.
this appears to be a mtech 2 copy, the lower part of the spoiler should curve upwards to match the lines of the upper part, your appears to be the standard plastic/rubber boot spoiler with a second tech 2 copy added on top. The join where they meet at each edge of the upper and lower spoiler also do not appear standard
the orginials normally had M Technic stuck in a small recess just above the ''5'' of your 325 badge.
you can see a picture below.
as for its value somewhere around 10-20quid if copy or 30-50 quid if original.
good luck!!
You know what I mean!
You can see the little embedded region on the far right of the picture, but the MTech badge is missing.
-
mrLEE30
- E30 Zone Team Member
- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
I agree!!hoikey wrote:think its a copy then
C2 for info the all tech 2 parts are same for tin top and cab except the lower sill covers, they are slightly different on a cab to cater for the wider sills required to make up for the lack of roof. then of course the 4 door/touring have different door pods to allow for rear door, but front/rear bumper and spoiler are identical accross the board.
mrlee
-
Chris-W
- E30 Zone Team Member
- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
- Contact:
Plus sill covers differ between 2 and 4 door as 2 door have slots for the rear quarter pods to hook into.mrLEE30 wrote:I agree!!hoikey wrote:think its a copy then
C2 for info the all tech 2 parts are same for tin top and cab except the lower sill covers, they are slightly different on a cab to cater for the wider sills required to make up for the lack of roof. then of course the 4 door/touring have different door pods to allow for rear door, but front/rear bumper and spoiler are identical accross the board.
mrlee
The spoiler looks like a replica part to me too.
