My E30 - 316i, now 318iS!

Show off your pride and joy here

Moderator: martauto

mr_dink
E30 Zone Regular
E30 Zone Regular
Posts: 812
Joined: Thu Jan 03, 2008 11:00 pm
Location: Huddersfield

Post Sun Mar 16, 2008 4:26 pm

Hi guys, just thought i'd share a few pictures of my new car -

Image
Tyres are still a little soapy as just been washed.


Image
Passenger side - looking good so far.

Couple of interior shots - needs a good clean but drivers seat not too bad for a car with 147000 miles.
Image
Image
As you can see the car has a black dashboard and a grey centre console, the glovebox was grey as well so I assume the car came with the grey trim and has had a replacement black dashboard at some point.

Does anyone know if the grey trim is rare as i've never seen one with it before?


Now for the bad bits -
Image
The guy I got it from said this was done by an RAC man when he locked his keys inside.... not sure if I believe that, surely an RAC man would have caused less damage?
Anyway i've now bent the door back so it shuts better at the top, just need a new B pillar trim piece now.

Image
This is the worst part of the car. A big scrape which has bent the arch inwards slightly, steel spare is pictured as the bent arch rubs very slightly on my 8j alloys.
Can't afford a new rear quarter panel so a hammer and filler job will have to do for now.

Image
The mighty M40!!!!!

You may have spotted my 4 door looking slightly jealous in the background, she's for sale here - http://www.e30zone.net/modules.php?name ... ic&t=95964

Been on for a few days but no interest, this tells me the following things -
1. Nobody wants a 320
2. Nobody wants an auto
3. Nobody wants a 4 door.

If anyone knows anyone who might be interested please let them know, need to sell the 4 door so I can tax my 2 door and start enjoying it!

Also if anyone knows about the grey centre console/glovebox then let me know, hoping it's some kind of ultra-rare option so I can make a few quid back! lol.

My plans for the car include changing the centre console and door cards to black, getting the body straight, and some leathers at some point.

Then this time next year when i've got a year's no claims it'll be M50 time!

Hoping to go to German night at the ace cafe on 31st March as will be in London that weekend anyway, any Zoners planning to be there?

Any comments welcome.

Cheers

Dink
Last edited by mr_dink on Tue Mar 31, 2009 5:03 pm, edited 1 time in total.
ed325i
E30 Zone Addict
E30 Zone Addict
Posts: 4146
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Mar 16, 2008 5:18 pm

There are not many around with the gray console etc.
Been on for a few days but no interest, this tells me the following things -
1. Nobody wants a 320
2. Nobody wants an auto
3. Nobody wants a 4 door
Yes you are right where.
You would be best off putting it on e bay.
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Tue Mar 18, 2008 4:58 pm

nice car spend a few bob on that and give the interior a good clean and it will be a stunner :D
320Touring
E30 Zone Team Member
E30 Zone Team Member
Posts: 12316
Joined: Fri Feb 11, 2005 11:00 pm
Location: Glasgow (Scotland)

Post Tue Mar 18, 2008 6:44 pm

looks a decent solid car!

And MIMs are never bad...

As for 320's, most on here aint seen the light yet :wink:
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
johnl320
E30 Zone Addict
E30 Zone Addict
Posts: 3124
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hampshire

Post Tue Mar 18, 2008 6:52 pm

Exactly what colour is the one you are selling??

cheers

john
mr_dink
E30 Zone Regular
E30 Zone Regular
Posts: 812
Joined: Thu Jan 03, 2008 11:00 pm
Location: Huddersfield

Post Wed Mar 19, 2008 1:45 am

Thanks for the comments guys.

Will be cleaning the interior shortly, I'm hoping to get some black leather and black door cards but on a pretty tight budget.

The MIM's came with my 320, I really like them so swapped them over and put the 14" BBS on the 320.

The one I'm selling is Royal Blue Metallic, I really like the colour but wanted a manual box so when the 2 door came up locally I grabbed it.

I've taken down the for sale thread as I had literally zero interest, but you can see pics of the car here. http://s266.photobucket.com/albums/ii27 ... k_ng7/320/

I will probably be putting it on eBay in a couple of days if it doesn't sell locally, it's in my local free ads paper but I've had nothing but timewasting scallys who say they'll come round and never do.

Cheers

Dink
stevotheevo
West Sussex Hooligan
Posts: 1153
Joined: Mon Apr 09, 2007 11:00 pm
Location: f@cked right off

Post Wed Mar 19, 2008 2:03 am

2.0 6 pot 4 door auto. unfortunatley, the worst combination ever.

your gonna struggle with that one fella.

new one looks nice, loving the mims :D
Image
mr_dink
E30 Zone Regular
E30 Zone Regular
Posts: 812
Joined: Thu Jan 03, 2008 11:00 pm
Location: Huddersfield

Post Tue Mar 31, 2009 5:02 pm

Bit of an update, seeing as it's been over a year since the last one!

The m40 engine didn't last long. Dropped a valve due to tappet failure.

Came out to be replaced by this -

Image

A firebreathing m42! the swap took a couple of days but I was well happy with my new found powah. Sadly over winter I noticed increasing amounts of steam coming out of the exhaust in the morning. A sniff test proved ok and the car never overheated so I carried on driving, having to refill and bleed the coolant system about once a week.

Eventually though I got a leak from the timing case and the oil all went to brown cheese. Head off time :eek:

First step was to remove the inlet and exhaust manifolds, radiator and viscous, and drain what was left of the fluids -

Image

Then the rocker cover -

Image

Lots of brake cleaner to wash all the crap off -

Image

Then you need to set the engine to TDC. There's a hole in the block under the starter motor to lock the flywheel. To set the camshafts you need to be able to hold a flat edge across the 2 flats shown at the back of the cam in this picture -

Image

And the lobes for cylinder 1 should be pointing upwards and inwards as in the above pictures.

Most manuals tell you to turn the engine back 45 degrees or so to avoid damage on reassembly, but as I was not dismantling the head I left both at TDC as I wanted to minimise the chance of disturbing the timing.

Witht he upper timing cover off, I removed the tensioner and the brackety thing between the cam sprokets, but this didn't give me enough slack to get the chain off -

Image

So I marked up the position of the exhaust cam sprocket and took it off -

Image

Now the head could come off. Here it is on the bench -

Image

A quick check showed no sign of leakage from the head gasket. The profile gasket was definately the culprit here -

Image

That hole in the gasket is the main waterway between the pump and the thermostat. You can see in the picture where the gasket has hardened and allowed oil and water to mix.

So the head and the block were given a light clean up -

Image
Image

Installation, as they say, is the reverse of removal!! I got my profile gasket from BMW and OE quality head gasket and head bolts from GSF. It's also advisable to have new inlet and exhaust gaskets, new thermostat and thermostat housing gasket, and of course a new oil filter.

V.important to tighten the head bolts in the right order to 30nm, then 90degrees, then 90 degrees.

Whilst I had the inlet off, I did the "throttle body heater delete mod", which is well known in IS circles to give up to eleventy horsepowers on those cold mornings. Sadly in my tinkering, I got a bit confused over the vaccuum hoses, and when I fired her up she wouldn't idle :cry:

I had to go away and look at some diagrams, went back and bypassed that stupid double t piece thing with the heater pipe inside it and connect the ICV direct to the inlet hose. Then she idled! :D :D :D

I've been out driving all day and the car hasn't missed a beat, sat at just under halfway on the temp guage the whole time. I'm really happy it all still works cos I've never tackled a job this big before.

Here's few pics of the car as she looks now, lowered 60mm all round.

Image
Image
Image
Image
Image

I've also fitted an IS interior in the dark grey check, all she needs now is a black headlining and a respray.... Although knowing me I'll probably end up getting a 24v lump first! :twisted:

I was going to use my pics to do a bit of a write up on profile gasket replacment for the wiki, so if you could let me know if I missed anything in my method and I'll get it written up.

All comments welcome.

Cheers,
Dink
Sanchez
Married to the E30 Zone
Married to the E30 Zone
Posts: 7578
Joined: Sun Apr 17, 2005 11:00 pm
Location: Sunny Scotland

Post Tue Mar 31, 2009 5:16 pm

ed325i wrote:There are not many around with the gray console etc.
Been on for a few days but no interest, this tells me the following things -
1. Nobody wants a 320
2. Nobody wants an auto
3. Nobody wants a 4 door
Yes you are right where.
You would be best off putting it on e bay.
Induvidually no one wants them let alone all together.

Worst combination iv you ask me.
Image
MrWhite
E30 Zone Regular
E30 Zone Regular
Posts: 721
Joined: Fri Mar 14, 2008 11:00 pm
Location: Renfrewshire

Post Tue Mar 31, 2009 5:37 pm

Good job getting it all running nice again. I do like those wheels, especially on a black car.

A profile gasket wiki article would be a useful addition but i must say I'm not a fan of your photography skills.
rust never sleeps
User avatar
georob
E30 Zone Camper
E30 Zone Camper
Posts: 1106
Joined: Thu Feb 03, 2005 11:00 pm
Location: Aberdeenshire

Post Tue Mar 31, 2009 5:44 pm

Doubtful about the RAC man, never had to do damage like that when i've locked my keys inside and when the c/l went daft, looks like some lowlife scrote trying their luck breaking into it :-x

Looks nice though 8)
E34 x 1 - V8 + lots of CF
E30 x 2 - Tourings (1 x M50, 1 x M40)
RS6 C5 - Stage 1 remap - 500bhp

George
mr_dink
E30 Zone Regular
E30 Zone Regular
Posts: 812
Joined: Thu Jan 03, 2008 11:00 pm
Location: Huddersfield

Post Tue Mar 31, 2009 5:44 pm

MrWhite wrote:Good job getting it all running nice again. I do like those wheels, especially on a black car.

A profile gasket wiki article would be a useful addition but i must say I'm not a fan of your photography skills.
They're not great photos as theyre taken with a camera phone, and all the engine ones are in a dark garage at night so even worse.

Perhaps if I were to write the article I could look for better photos.
mr_dink
E30 Zone Regular
E30 Zone Regular
Posts: 812
Joined: Thu Jan 03, 2008 11:00 pm
Location: Huddersfield

Post Tue Mar 31, 2009 5:47 pm

georob wrote:Doubtful about the RAC man, never had to do damage like that when i've locked my keys inside and when the c/l went daft, looks like some lowlife scrote trying their luck breaking into it :-x

Looks nice though 8)
Yeah I know mate, definately an attempted break in.

I've touched those areas up now, and I've got a set of rear pop out windows that will make it look all better (If I ever get round to fitting them!)
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Thu Apr 02, 2009 1:16 pm

looking good, it just needs an IS front spoiler :wink:
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Thu Apr 02, 2009 3:25 pm

Look's lovely :cool:

+1 on the IS lip 8)
Current Fleet:

E30 335i Turbo M3 Convertible Replica
LeonNewton
E30 Zone Camper
E30 Zone Camper
Posts: 1223
Joined: Sat Dec 29, 2007 11:00 pm
Location: wirral

Post Fri Apr 03, 2009 4:06 pm

Love the pinstriping on e30's did a red is come with any pinstriping as standard or an option
Yer i am sorry for my bad spelling. i am dislexic and find it just as hard to read your posts as you do mine.
Image
GrindCulture
E30 Zone Addict
E30 Zone Addict
Posts: 2955
Joined: Mon Mar 03, 2008 11:00 pm
Location: Exeter

Post Fri Apr 03, 2009 4:16 pm

Looks a pretty tidy motor mate, even better with some of that iS powwwaaahh!
Not in E30s any more :(
mr_dink
E30 Zone Regular
E30 Zone Regular
Posts: 812
Joined: Thu Jan 03, 2008 11:00 pm
Location: Huddersfield

Post Fri Apr 03, 2009 5:27 pm

ImysE30 wrote:Look's lovely :cool:

+1 on the IS lip 8)
I hear what you're saying but I live in an area with a lot of speedbumps, the standard lip gets knocked off quite often so I'd have no chance with the IS lip!
LeonNewton wrote:Love the pinstriping on e30's did a red is come with any pinstriping as standard or an option
My car has the pinstripe as it's not a real IS, it's based on a 316i lux. All the lux models I've seen have the pinstripe, don't know whether it was an option on other models. Should I ever get round to respraying the car I would keep the pinstripes, I like them a lot :)

Thanks for the comments guys
GrindCulture
E30 Zone Addict
E30 Zone Addict
Posts: 2955
Joined: Mon Mar 03, 2008 11:00 pm
Location: Exeter

Post Fri Apr 03, 2009 5:41 pm

mr_dink wrote:Should I ever get round to respraying the car I would keep the pinstripes, I like them a lot :)
Me too, I wanna get mine sorted, seeing yours has made the want all the bigger.
Not in E30s any more :(
mr_dink
E30 Zone Regular
E30 Zone Regular
Posts: 812
Joined: Thu Jan 03, 2008 11:00 pm
Location: Huddersfield

Post Fri Apr 03, 2009 5:50 pm

GrindCulture wrote:
mr_dink wrote:Should I ever get round to respraying the car I would keep the pinstripes, I like them a lot :)
Me too, I wanna get mine sorted, seeing yours has made the want all the bigger.
Well the most recent pictures are quite flattering, close up the car has scratching or damage of some sort on pretty much every panel.

Respray is a long way down the list at the moment, I live in a fairly rough area and I wouldn't be able to sleep at night if the car was mint and parked out on the street!

One day though (that's what I tell her!) :lol: