Im looking to rebuild an m20 engine. Iv been lost in the google world for days now looking for decent diy info with no luck. Its a 325i 885 head on an eta 2.7 bottom but really im looking for a general engine rebuild link.
Can anyone suggest a link?
thanks.
Helpful links for m20 rebuild?
Moderator: martauto
-
327ire
- E30 Zone Regular
- Posts: 267
- Joined: Wed Apr 23, 2008 11:00 pm
a few bits like
=torque settings
=processes of dismantle / reassemble
=things to look out for etc
I know the 2.7 eta conversion is another thing but im up to date with that (i think)
=torque settings
=processes of dismantle / reassemble
=things to look out for etc
I know the 2.7 eta conversion is another thing but im up to date with that (i think)
-
goosiegander
- Zonegoose
- Posts: 2544
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: East Anglia
Good evening -get hold of a bently manual for the e30 -all the tollerances/torque settings/procedures you will need are in there, if there is anything you cant find there than there is plenty of info here 
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
B7 is doing a photo re-build of an M20,check out the photo gallery. Simon13 has just done the same with his Alpina touring,check out the photo gallery.Jazzman did a 2.8 build a while back, a search should bring it up.M20 is a logical engine to strip and re-build,take your time and enjoy it.
Youth is wasted on the young.