Good idea about the spring pads, will give it a go.gareth wrote:get some tools and general shite in the boot and it'll be fine![]()
do you have the thicker spring pads on there maybe? it does look a little high
Bargain Project - Stance sorted - Coilovers Page 3 20-03-09
Moderator: martauto
-
Dan320is
- E30 Zone Squatter

- Posts: 1813
- Joined: Wed Jan 12, 2005 11:00 pm
- Location: Cambridgeshire
Last edited by Dan320is on Fri Mar 20, 2009 4:45 pm, edited 1 time in total.
-
mabz
- E30 Zone Squatter

- Posts: 1583
- Joined: Sat May 24, 2008 11:00 pm
- Location: cambridgeshire
fair play!i wouldnt know where to start and if i did id eff it up! when im sorted(get the tech 2 kit on!!!!!!!!!)will pm you and see if we can get a meet on!a trip to bigbavarianbeauties is always a nice run 
-
Dan320is
- E30 Zone Squatter

- Posts: 1813
- Joined: Wed Jan 12, 2005 11:00 pm
- Location: Cambridgeshire
Sounds good to me, I went to their last very cold BBQ. We'll take a run up to the next onemabz wrote:fair play!i wouldnt know where to start and if i did id eff it up! when im sorted(get the tech 2 kit on!!!!!!!!!)will pm you and see if we can get a meet on!a trip to bigbavarianbeauties is always a nice run
-
Dan320is
- E30 Zone Squatter

- Posts: 1813
- Joined: Wed Jan 12, 2005 11:00 pm
- Location: Cambridgeshire
Another update for you all. Got the new suspension set up on, just need to raise the rear a bit as it was touching slightly on bumpy roads and hard accelleration.
















Last edited by Dan320is on Fri Mar 20, 2009 4:59 pm, edited 1 time in total.
-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
Awesome. Looks great Dan. 

-
punk_sy
- E30 Zone Regular

- Posts: 427
- Joined: Sun Jan 13, 2008 11:00 pm
- Location: nottingham
looking a lot better on that setup got any piccys of the coil overs ?!
-
paulmitchell1984
- E30 Zone Regular

- Posts: 490
- Joined: Tue Feb 24, 2009 11:00 pm
what coilovers did you use an how much if you dont mind me asking, loosks sweet though 

-
ImysE30
- Married to the E30 Zone

- Posts: 22478
- Joined: Mon Jul 07, 2008 11:00 pm
- Location: Derby Massive!!
Looks awesome now
I need some coilovers

Current Fleet:
E30 335i Turbo M3 Convertible Replica
E30 335i Turbo M3 Convertible Replica
-
Dan320is
- E30 Zone Squatter

- Posts: 1813
- Joined: Wed Jan 12, 2005 11:00 pm
- Location: Cambridgeshire
No pics as yet as they are coming back off for a few more tweeks and finishing touches (powder coating etc). I bought all the components and made the kit myself (with the help of my welder/fabricator brotherpaulmitchell1984 wrote:what coilovers did you use an how much if you dont mind me asking, loosks sweet though
I haven't costed everything yet but I bought shocks, threaded sleeves, collars, helper springs etc. Definately no more than £500 all in. As with nearly all coilover kits for the E30, the rear isn't a true coilover - Just a shorter spring on an adjustable perch.
Last edited by Dan320is on Sat Mar 21, 2009 12:26 am, edited 1 time in total.
-
Dan320is
- E30 Zone Squatter

- Posts: 1813
- Joined: Wed Jan 12, 2005 11:00 pm
- Location: Cambridgeshire
Thanks mate, this suspension and wheel package would look awesome on the nato machine! But I do admire the look you have already.initial_g wrote:
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
-
ImysE30
- Married to the E30 Zone

- Posts: 22478
- Joined: Mon Jul 07, 2008 11:00 pm
- Location: Derby Massive!!
Where did you get the components from?I bought all the components and made the kit myself
Current Fleet:
E30 335i Turbo M3 Convertible Replica
E30 335i Turbo M3 Convertible Replica
-
Dan320is
- E30 Zone Squatter

- Posts: 1813
- Joined: Wed Jan 12, 2005 11:00 pm
- Location: Cambridgeshire
Some parts from rally design (threaded sleeves) and a local engineering supplies company (all hardware inc stainless nuts & bolts etc).ImysE30 wrote:Where did you get the components from?I bought all the components and made the kit myself
It takes a long time to get everything set up perfectly straight and to counter measure the pull/distortion from welding the threaded sleeve to the strut.
-
ImysE30
- Married to the E30 Zone

- Posts: 22478
- Joined: Mon Jul 07, 2008 11:00 pm
- Location: Derby Massive!!
Sound's like hardwork but just what i need for my car.Dan325iSport wrote:Some parts from rally design (threaded sleeves) and a local engineering supplies company (all hardware inc stainless nuts & bolts etc).ImysE30 wrote:Where did you get the components from?I bought all the components and made the kit myself
It takes a long time to get everything set up perfectly straight and to counter measure the pull/distortion from welding the threaded sleeve to the strut.
These parts?
http://www.rallydesign.co.uk/index.php?cPath=1358
Current Fleet:
E30 335i Turbo M3 Convertible Replica
E30 335i Turbo M3 Convertible Replica
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
Moar lower in front!!!
Looking good dude!
Looking good dude!
-
Dan320is
- E30 Zone Squatter

- Posts: 1813
- Joined: Wed Jan 12, 2005 11:00 pm
- Location: Cambridgeshire
Yep, they're the bits you need.ImysE30 wrote:Sound's like hardwork but just what i need for my car.Dan325iSport wrote:Some parts from rally design (threaded sleeves) and a local engineering supplies company (all hardware inc stainless nuts & bolts etc).ImysE30 wrote: Where did you get the components from?
It takes a long time to get everything set up perfectly straight and to counter measure the pull/distortion from welding the threaded sleeve to the strut.
These parts?
http://www.rallydesign.co.uk/index.php?cPath=1358
-
Dan320is
- E30 Zone Squatter

- Posts: 1813
- Joined: Wed Jan 12, 2005 11:00 pm
- Location: Cambridgeshire
It's going to come down on the front and I'm going to lift the rear slightly.Jhonno wrote:Moar lower in front!!!
Looking good dude!



