primer for alloy referb.
Moderator: martauto
-
Sanchez
- Married to the E30 Zone
- Posts: 7578
- Joined: Sun Apr 17, 2005 11:00 pm
- Location: Sunny Scotland
as title really whats the best primer or undercoat to use when referbing my alloys?
-
Andy325i
- E30 Zone Addict
- Posts: 4052
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Avon
Etch Primer maybe? I am no expert but sure someone will be along in a minute 
M50B25NonVanos & M52B28Vanos Heads for sale. Pm Me.
-
Muli
- E30 Zone Newbie
- Posts: 108
- Joined: Tue Sep 11, 2007 11:00 pm
- Location: North Wales
It all depends . . .
If you have rubbed down to bare metal then make sure you use etch primer. It will protect the bare metal and prevent any rusting issues in the future.
If you havent then just use your ordinary primer from your local motor factor.
Good luck with the re-furb, I have done a set of 5 spokes for a Pug about a year ago and vowed never again!!!
If you have rubbed down to bare metal then make sure you use etch primer. It will protect the bare metal and prevent any rusting issues in the future.
If you havent then just use your ordinary primer from your local motor factor.
Good luck with the re-furb, I have done a set of 5 spokes for a Pug about a year ago and vowed never again!!!
-
Sanchez
- Married to the E30 Zone
- Posts: 7578
- Joined: Sun Apr 17, 2005 11:00 pm
- Location: Sunny Scotland
there done apart from laquering.
not the best job but there for me and im no professional.
not the best job but there for me and im no professional.