Bit of engine bay bling for the turd..

Show off your pride and joy here

Moderator: martauto

Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Mon Mar 09, 2009 10:16 pm

SUMPCRACKER.. I didn't say it would do 171mph, just on the rev limiter would be 171mph. :wink: :P

Nathan.. :lol: Sorry dude! Only shot I had of it where I wasn't in it :P Niggles are getting there.. Misfire was lambdas the wrong way round.. Brakes are sorted now also 8)

Cheers Oakey..

Just got back in from a drive in it, and it is so fooking quick, You are doing 100 (kph of course) before you even realise it.. Plant your boot in 2nd and it snakes up the road :twisted: :twisted:

Wiring needs more tidying, oil cooler needs mounting properly and one of the idlers or something has noisy bearings, but its all small things.. Just got till end of May to get them done now!! :D
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Mon Mar 09, 2009 10:29 pm

Jhonno wrote:Just got back in from a drive in it, and it is so fooking quick, You are doing 100 (kph of course) before you even realise it.. Plant your boot in 2nd and it snakes up the road :twisted: :twisted:
:D :twisted: :twisted: :twisted:

I love the sound of mine as it passes 7000rpm!

What exhaust are you using? Still the Single back box jobbie?
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
SUMPCRACKER
E30 Zone Addict
E30 Zone Addict
Posts: 2040
Joined: Sat Dec 13, 2008 11:00 pm
Location: Milton Keynes

Post Mon Mar 09, 2009 10:34 pm

:o:
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Mon Mar 09, 2009 10:51 pm

bss325i wrote:
Jhonno wrote:Just got back in from a drive in it, and it is so fooking quick, You are doing 100 (kph of course) before you even realise it.. Plant your boot in 2nd and it snakes up the road :twisted: :twisted:
:D :twisted: :twisted: :twisted:

I love the sound of mine as it passes 7000rpm!

What exhaust are you using? Still the Single back box jobbie?
So do I!! There is extra amusement for me as it redlines in the economy gauge on my rev counter.. :mad:

Still running the single box yes.. It is LOUD.. I shall be getting a centre box for it asap now, but will keep the Supersprint :twisted:
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Mon Mar 09, 2009 10:52 pm

Jhonno wrote:
bss325i wrote:
Jhonno wrote:Just got back in from a drive in it, and it is so fooking quick, You are doing 100 (kph of course) before you even realise it.. Plant your boot in 2nd and it snakes up the road :twisted: :twisted:
:D :twisted: :twisted: :twisted:

I love the sound of mine as it passes 7000rpm!

What exhaust are you using? Still the Single back box jobbie?
So do I!! There is extra amusement for me as it redlines in the economy gauge on my rev counter.. :mad:

Still running the single box yes.. It is LOUD.. I shall be getting a centre box for it asap now, but will keep the Supersprint :twisted:
You using standard clocks?
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Mon Mar 09, 2009 10:52 pm

SUMPCRACKER wrote::o:
Don't worry about it! It maybe wasn't clear with the way I wrote it.. I am fully aware the E30 has the aerodynamics of a breeze block :)
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Mon Mar 09, 2009 10:54 pm

Yeah I am.. I am NOT paying through the nose for M3 clocks.. I will just get a new counter face made up marked up to 9k or something if I can be arsed
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Mon Mar 09, 2009 10:55 pm

Shame. I will have a set of M3 clocks for sale soon at a reasonable price.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Mon Mar 09, 2009 10:59 pm

Why is that? :squint:

What do you class as reasonable?
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
bmwowner
E30 Zone Regular
E30 Zone Regular
Posts: 411
Joined: Mon Jul 30, 2007 11:00 pm
Location: Surrey

Post Mon Mar 09, 2009 11:00 pm


Just watched barrys ring video, yes they are fast arnet they!
Any link to this video??
Image
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Mon Mar 09, 2009 11:02 pm

bmwowner wrote:

Just watched barrys ring video, yes they are fast arnet they!
Any link to this video??
Here you go Dan! :)



I think it looks slow!
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Mon Mar 09, 2009 11:05 pm

I've watched that vid of you loads of times now :lol:

Oz still cracks me up at the beginning! :rofl:
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Mon Mar 09, 2009 11:07 pm

At 2min 28 i'm doing about 120-130mph before breaking lifting for the left hand kink.

SOOOO much understeer tyre squeel! I hope the adjustments will cure some of it!

Only 11 weeks to go! :D :D :D :twisted: :twisted: :twisted:
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
bmwowner
E30 Zone Regular
E30 Zone Regular
Posts: 411
Joined: Mon Jul 30, 2007 11:00 pm
Location: Surrey

Post Mon Mar 09, 2009 11:09 pm

Cheers Barry, :thumb:
Image
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Mon Mar 09, 2009 11:14 pm

bss325i wrote:At 2min 28 i'm doing about 120-130mph before breaking lifting for the left hand kink.

SOOOO much understeer tyre squeel! I hope the adjustments will cure some of it!

Only 11 weeks to go! :D :D :D :twisted: :twisted: :twisted:
Well slow :P

Yeah I reckon they will make a difference..

Indeed!! 11 weeks to make sure the turd will actually make it all the way there and back! :o: :lol:
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
bmwowner
E30 Zone Regular
E30 Zone Regular
Posts: 411
Joined: Mon Jul 30, 2007 11:00 pm
Location: Surrey

Post Mon Mar 09, 2009 11:32 pm

Just watched Barry's video, Brilliant, i would be so tired by half way through,
just a little race from the lights gets my adrenaline going for 10 minutes let alone 10 minutes around the ring, i would have to have a nap between laps. Engine sounds lovely, car goes bloody well, how long is the round trip? keep up the good work!!
Image
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Tue Mar 10, 2009 12:28 am

Round trip of the circuit? 13miles iirc..

To the 'Ring.. 800 miles odd
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
winx
E30 Zone Camper
E30 Zone Camper
Posts: 1099
Joined: Wed Jul 30, 2008 11:00 pm
Location: almost certainly not working on my E30...

Post Tue Mar 10, 2009 1:50 pm

11 weeks 8O need to get a wiggle on :twisted:
Bob_S
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5412
Joined: Sat Jun 11, 2005 11:00 pm
Location: chester, cheshire

Post Tue Mar 10, 2009 7:30 pm

winx wrote:11 weeks 8O need to get a wiggle on :twisted:
err should pull my finger out then!!!
Bollocks to this 24v scrap!
Jon_Bmw
Dangerous when thinking
Dangerous when thinking
Posts: 7604
Joined: Tue Jan 11, 2005 11:00 pm
Location: Salisbury

Post Thu Mar 12, 2009 3:01 pm

Jon_Bmw wrote:I've got about 3 people tapping me up! I know I am good looking chaps, but come on :eek: :eek:

Waiting on a fricking exam timetable!! It stitched me up, by about 10 hours, 2 years ago. :(
Would you fucking believe it:

UMKCME-20-3 DIRECT AND DATABASE MARKETING Tuesday 02 Jun 2009 9:00 12:00 3D33 Frenchay Campus

I fucking would.
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Thu Mar 12, 2009 7:41 pm

Jon_Bmw wrote:
Jon_Bmw wrote:I've got about 3 people tapping me up! I know I am good looking chaps, but come on :eek: :eek:

Waiting on a fricking exam timetable!! It stitched me up, by about 10 hours, 2 years ago. :(
Would you ******* believe it:

UMKCME-20-3 DIRECT AND DATABASE MARKETING Tuesday 02 Jun 2009 9:00 12:00 3D33 Frenchay Campus

I ******* would.
Gay! :(
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
Theo
Old Skooler
Old Skooler
Posts: 10735
Joined: Wed Jun 01, 2005 11:00 pm
Location: Kent

Post Thu Mar 12, 2009 7:55 pm

Unlucky Jon, same thing happened to me last year. Next time eh?
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Thu Mar 12, 2009 9:45 pm

Gutted dude :(

Turd made 294bhp on the dyno today though :D
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
march109
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6632
Joined: Sun Aug 20, 2006 11:00 pm
Location: Bournemouth

Post Thu Mar 12, 2009 9:48 pm

Jon_Bmw wrote:
Jon_Bmw wrote:I've got about 3 people tapping me up! I know I am good looking chaps, but come on :eek: :eek:

Waiting on a fricking exam timetable!! It stitched me up, by about 10 hours, 2 years ago. :(
Would you ******* believe it:

UMKCME-20-3 DIRECT AND DATABASE MARKETING Tuesday 02 Jun 2009 9:00 12:00 3D33 Frenchay Campus

I ******* would.
Always the way.... not considered getting a sick note and just sitting the resit then?
325i Tech 1 Touring, breaking.

2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
SUMPCRACKER
E30 Zone Addict
E30 Zone Addict
Posts: 2040
Joined: Sat Dec 13, 2008 11:00 pm
Location: Milton Keynes

Post Thu Mar 12, 2009 10:18 pm

Was in traffic in Luton today,
Heard an awsome sound, looked accross- expecting to see Lamborghini - its Jhonno.
That car looks twice as good in the fleash than on here!
Wheels are WIDE! and the noise would give any straight man semi.

Take it you went to the rollers in sundon park then, they do know their sh1t about BMWs.
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Thu Mar 12, 2009 11:07 pm

Did you go to Sals Dan?
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
SUMPCRACKER
E30 Zone Addict
E30 Zone Addict
Posts: 2040
Joined: Sat Dec 13, 2008 11:00 pm
Location: Milton Keynes

Post Thu Mar 12, 2009 11:13 pm

You lot know Salad?
jaistanley
E30 Zone Addict
E30 Zone Addict
Posts: 2517
Joined: Tue Jan 18, 2005 11:00 pm
Location: Coventry and Essex

Post Thu Mar 12, 2009 11:13 pm

Dan made a noise that'd give a straight man a semi? He will be pleased..... :wink:

Good power JohnBoy.. Bet you're well chuffed.
Image
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Thu Mar 12, 2009 11:25 pm

SUMPCRACKER wrote:You lot know Salad?
He is M5 pilot on here and used he used to be the Zone shop.

My sport has made 185bhp/190lbft on his dyno. Dealt with Sal plenty of times.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
SUMPCRACKER
E30 Zone Addict
E30 Zone Addict
Posts: 2040
Joined: Sat Dec 13, 2008 11:00 pm
Location: Milton Keynes

Post Thu Mar 12, 2009 11:34 pm

Didn't know that.
Im a mobile technician in Luton and surrounding aeras, mostly doing performance cars.
Never used him myself but have been down there with customers and friends for flashes ect..

I was suprised you lot would know him given the distance, had no idea he was a zoner.
There are not many people I would let work on my cars - but he is one.

Good power for a 2.5i btw.
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Thu Mar 12, 2009 11:48 pm

SUMPCRACKER wrote:Didn't know that.
Im a mobile technician in Luton and surrounding aeras, mostly doing performance cars.
Never used him myself but have been down there with customers and friends for flashes ect..

I was suprised you lot would know him given the distance, had no idea he was a zoner.
There are not many people I would let work on my cars - but he is one.

Good power for a 2.5i btw.
Completely standard other than a BTB2 manifold and Scopion pipe! Oh and 53k from new!
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
SUMPCRACKER
E30 Zone Addict
E30 Zone Addict
Posts: 2040
Joined: Sat Dec 13, 2008 11:00 pm
Location: Milton Keynes

Post Thu Mar 12, 2009 11:58 pm

Shows how restrictive the original log and pea shooters must be..
Alpina only managed that power on the C1 with all their fancy bits!
53K!? That car is worth a lot of beans.

Im gona go now as we're cluttering Jhonno's thread.
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Fri Mar 13, 2009 12:07 am

:lol:

Don't worry about it, I don't give a shit, it is hardly spamming my thread with nonsense

It is hard not to notice it isn't it! Rather loud.. It has the bite to back the bark though :twisted:

Got some video's of it on the rollers..
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Fri Mar 13, 2009 12:14 am

Jhonno wrote:Got some video's of it on the rollers..
Post em up! :D
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
SUMPCRACKER
E30 Zone Addict
E30 Zone Addict
Posts: 2040
Joined: Sat Dec 13, 2008 11:00 pm
Location: Milton Keynes

Post Fri Mar 13, 2009 12:21 am

bss325i wrote:
Jhonno wrote:Got some video's of it on the rollers..
Post em up! :D
More semi's on way.