Show off your pride and joy here
Moderator: martauto
-
Ilkorin
- E30 Zone Regular

- Posts: 871
- Joined: Fri Sep 28, 2007 11:00 pm
- Location: Essex
Post
Sat Feb 14, 2009 8:25 pm
And after a whole day of scrubbing, sanding, priming, painting, masking etc... I've turned this:
with some nasty kerbed edges...
Into this:
Now to see how long they last before the paint starts flaking
-
ImysE30
- Married to the E30 Zone

- Posts: 22478
- Joined: Mon Jul 07, 2008 11:00 pm
- Location: Derby Massive!!
Post
Sat Feb 14, 2009 8:26 pm
Nice job, look a lot better

Current Fleet:
E30 335i Turbo M3 Convertible Replica
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
Post
Sat Feb 14, 2009 8:28 pm
good job. i did mine about 2 years ago and theyve still not flaked.
-
Baz666
- E30 Zone Addict

- Posts: 3516
- Joined: Fri Feb 29, 2008 11:00 pm
- Location: Ipswich, Suffolk
Post
Sat Feb 14, 2009 11:28 pm
lookin good fella


E46 328ci, sport bumpers, 19" style 95`s
-
leeparkes
- Married to the E30 Zone

- Posts: 9535
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Post
Sat Feb 14, 2009 11:31 pm
good job!
make sure you put some sort of wax on them as it will make them a lot easier to keep clean

Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..

-
m4xos
- E30 Zone Addict

- Posts: 2410
- Joined: Mon Jan 28, 2008 11:00 pm
- Location: Bournemouth
Post
Sat Feb 14, 2009 11:50 pm
fairplay, they look sweet will be doing mine this week! how'd you get the edge soooo good?
-
Ilkorin
- E30 Zone Regular

- Posts: 871
- Joined: Fri Sep 28, 2007 11:00 pm
- Location: Essex
Post
Sun Feb 15, 2009 12:05 am
lots of elbow grease.....and 80 grit sandpaper

the edges are by no means perfect and some have some visible dips where the serious kerbing was....
here's one mid-refurb
From there a blast with primer and audi aluminium silver paint, and it looks good as new (from a slight distance)
what sort of wax are we talking? just wax like you use on the bodywork.....
-
E30Gheko
- E30 Zone Addict

- Posts: 3789
- Joined: Sun Sep 28, 2008 11:00 pm
- Location: Wirral
Post
Sun Feb 15, 2009 12:46 am
Mate they look the dogs! Good work. I might have a go at mine!

-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
Post
Sun Feb 15, 2009 4:36 pm
Well done fella.
M30 Tech 1 Touring on gas.

-
Ilkorin
- E30 Zone Regular

- Posts: 871
- Joined: Fri Sep 28, 2007 11:00 pm
- Location: Essex
Post
Sun Feb 15, 2009 6:19 pm
Thanks all! I am surprised at how easy it was in the end... Long term durability wise, I'm not completely sure, but it shouldn't be too difficult to respray if it gets chipped...
and here's two pics with them on the car...
I should really get some proper pictures of the car up one day...
-
Andy_E30
- E30 Zone Newbie

- Posts: 30
- Joined: Tue Feb 10, 2009 11:00 pm
Post
Thu Feb 19, 2009 7:08 pm
hey man how did u gt thm so gd i wonna do mine maself but im scared lol

tell me all the lil tips i need 2 no please

-
Ilkorin
- E30 Zone Regular

- Posts: 871
- Joined: Fri Sep 28, 2007 11:00 pm
- Location: Essex
Post
Thu Feb 19, 2009 7:17 pm
haha time and patience are the only little tips I can give....
expect to take a VERY long time sanding the lip down to get rid of the kerbing, and on mine you can still see where it was before...also make sure the wheels are spotless or the paint will go horribly wrong - my hands are still blistered and aching from the scrubbing and sanding...
It helps if you've got the wheels off the car and aren't desperate to get them back on again...it took me all weekend to do the whole set, and I would have rushed it and done a terrible job if I needed them back on the car to use...
-
Cotty
- Hartge Crew
- Posts: 5926
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Orpington, Kent
Post
Thu Feb 19, 2009 7:18 pm
Looking good and I bet a lot cheaper than a shop refurb
-
Bob_S
- Engaged to the E30 Zone

- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
Post
Sat Feb 21, 2009 5:34 pm
cotty this is true.. if you dont have anything else to do!
I pay about £40 a wheel for refurbs to me this is great as they are done properly for that and will last a long time and the lips are right too!
Bollocks to this 24v scrap!
-
fozzymandeus
- E30 Zone Regular

- Posts: 392
- Joined: Tue Mar 07, 2006 11:00 pm
- Location: North Wales
Post
Sat Feb 21, 2009 6:01 pm
if you don't mind me asking, where do you get your refurbs, Bob_S?
I'm based not very far from you and have a need for some work!
-
Bob_S
- Engaged to the E30 Zone

- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
Post
Sat Feb 21, 2009 7:52 pm
I get them done at
www.smartrepaircompany.co.uk Chris is a really good lad and won't be one to hide away if there is a problem. I didnt realise you were close?
He's done my Hartge 3pc wheels and I have a set of staggered alpina's with him at the moment

Bollocks to this 24v scrap!
-
fozzymandeus
- E30 Zone Regular

- Posts: 392
- Joined: Tue Mar 07, 2006 11:00 pm
- Location: North Wales
Post
Sat Feb 21, 2009 11:00 pm
Thanks!
I'm only over North Wales way, I work in Ruthin.
I have 4 very large style 32s to refurb on my seven and 4 15" mazda alloys to do for my wife's MX5.
[edit] Just checked out the website, will give him a go on the mazda wheels when funds allow

[/edit]
-
Bob_S
- Engaged to the E30 Zone

- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
Post
Sat Feb 21, 2009 11:27 pm
Sound, You need a 24v next, join the 24v club lol!
here's my hartge's -

Bollocks to this 24v scrap!
-
fozzymandeus
- E30 Zone Regular

- Posts: 392
- Joined: Tue Mar 07, 2006 11:00 pm
- Location: North Wales
Post
Sun Feb 22, 2009 7:50 am
Those hartge's look great!
My seven has 32 valves, if that helps...
-
Bob_S
- Engaged to the E30 Zone

- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
Post
Sun Feb 22, 2009 10:48 am
it would help in an e30

Bollocks to this 24v scrap!
-
BigBavarian
- E30 Zone Camper

- Posts: 1130
- Joined: Mon Mar 03, 2008 11:00 pm
- Location: Essex/Suffolk boarderlands!
Post
Sun Feb 22, 2009 11:25 am
I must admit ihave looked at doing a home refurb on bbs and i dont have the patience to do all some little corners and spokes.
Good work mate they look great
Call me on 07858 151 197 - leave a message if no answer as i am probably busy! Will call you back!
Please email thru the website as not always on the zone for pm's.
Thanks
Richard
-
m4xos
- E30 Zone Addict

- Posts: 2410
- Joined: Mon Jan 28, 2008 11:00 pm
- Location: Bournemouth
Post
Sun Feb 22, 2009 1:16 pm
Bob_S wrote:Sound, You need a 24v next, join the 24v club lol!
here's my hartge's -

sweet, they are smart, was that a refurbed 1 for £40?
-
Bob_S
- Engaged to the E30 Zone

- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
Post
Sun Feb 22, 2009 6:16 pm
m4xos wrote:Bob_S wrote:Sound, You need a 24v next, join the 24v club lol!
here's my hartge's -

sweet, they are smart, was that a refurbed 1 for £40?
no that was £90 I think he split them, polished the lips, painted the centres, powder coated the rears and resealed them, they have new bolts too
Bollocks to this 24v scrap!
-
mattsbmw
- E30 Zone Regular

- Posts: 447
- Joined: Sun Feb 10, 2008 11:00 pm
- Location: Heanor, Derbyshire
Post
Sun Feb 22, 2009 8:09 pm
I refurbd my BBS last summer, have got another set that i intend on doing a much better job on this spring time.