Bargain Project - Stance sorted - Coilovers Page 3 20-03-09

Show off your pride and joy here

Moderator: martauto

Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Fri Jan 30, 2009 7:25 pm

ricey46 wrote:Looking good Dan, you've fair cracked on with the welding, nice one :cool:
Cheers, it's taken a while but it's well worth it.
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Fri Jan 30, 2009 7:28 pm

beemerbird wrote:This is looking like a carefully engineered project - I am most impressed.

What is the function of the seam sealer stuff you put on? (Still at the getting covered in grease stage myself - never attempted the getting showered with sparks, but the other half has a welder which I may have to use one day).
The seam sealer is a rubber/silicon type paint that you spread over newly welded joints in order to fully seal it from water, corrosion etc. If in the small chance that there are any tiny pin prick holes in the new joint it will fill/seal it. After that I prime it with etch primer then paint with a good quality underseal.
beemerbird
Married to the E30 Zone
Married to the E30 Zone
Posts: 8620
Joined: Mon Mar 24, 2008 11:00 pm
Location: Suffolk

Post Fri Jan 30, 2009 7:46 pm

Dan325iSport wrote:
beemerbird wrote:This is looking like a carefully engineered project - I am most impressed.

What is the function of the seam sealer stuff you put on? (Still at the getting covered in grease stage myself - never attempted the getting showered with sparks, but the other half has a welder which I may have to use one day).
The seam sealer is a rubber/silicon type paint that you spread over newly welded joints in order to fully seal it from water, corrosion etc. If in the small chance that there are any tiny pin prick holes in the new joint it will fill/seal it. After that I prime it with etch primer then paint with a good quality underseal.
Thank you, Sir. I shall file that in my head somewhere useful :D
If it ain't broke, fix it till it is
User avatar
jamie323i
E30 Zone Regular
E30 Zone Regular
Posts: 569
Joined: Sun Aug 10, 2008 11:00 pm
Location: Chafford Hundred Grays Essex

Post Fri Jan 30, 2009 8:01 pm

Looks like an interesting project you have there!

Nice job on the welding :cool:
m4xos
E30 Zone Addict
E30 Zone Addict
Posts: 2410
Joined: Mon Jan 28, 2008 11:00 pm
Location: Bournemouth

Post Fri Jan 30, 2009 8:35 pm

nice job so far mate!!!!

i need to learn how to weld!!
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Sat Jan 31, 2009 6:18 pm

New arch went in today, seam sealed the inside, primed the outside and covered the holes/joint with grease until it goes into the bodyshop for paint.

Image
Image
Image
Image
Image
Image
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Fri Feb 06, 2009 4:31 pm

We're now on the home straight, I can see the MOT test in sight.....at last!

Just got to finish making the plates for the nearside sill (got a new sill here to cut up) and bend up a plate for the footwell.

The jacking support/square sections are a bloody nightmare, their design just traps crap and promotes rot - see 2nd pic.

Anyway, here's a few pics detailing the progress and new parts that have made their way onto the old girl.

Image
Image
Powerflex eccentric control arm bushes fitted along with new arms and antiroll bar links.
Image
Scorpion exhaust system courtesy of Ant, not a big fan of the DTM tailpipe but I'm not going to moan with the price I paid :)
Image
And lastly the new suspension, 60/40 drop.
Image

For now it's going to sit on some 15" BBS' but I have just ordered some new rims.....keep your eyes peeled winkeye
toecutter666
E30 Zone Regular
E30 Zone Regular
Posts: 834
Joined: Thu Feb 21, 2008 11:00 pm
Location: bedfordshire

Post Sat Feb 07, 2009 3:20 pm

Hat off to you mate, bringing one back from the dead. Given me a kick up the butt to get in the garage and brave the dreaded rot :cry:
rix313
E30 Zone Team Member
E30 Zone Team Member
Posts: 4970
Joined: Fri Oct 31, 2008 11:00 pm
Location: Silverstone

Post Sat Feb 07, 2009 3:23 pm

Bloody good work there I'd have run for the hills lol.

shame you welded up the holes, coulda been ya sunday driver, was very 'holy' winkeye
charlE30
E30 Zone Addict
E30 Zone Addict
Posts: 3818
Joined: Mon Jan 10, 2005 11:00 pm
Location: Warwick

Post Sat Feb 07, 2009 8:50 pm

Good to see another one being saved and not fragged :thumb:

Love your sig pic, is it on coilovers? perfect stance :cool:
BMW E30 344i track car :banana:
BMW F31 335d xdrive
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Sat Feb 07, 2009 9:11 pm

charlE30 wrote:Good to see another one being saved and not fragged :thumb:

Love your sig pic, is it on coilovers? perfect stance :cool:
Thanks for the compliment. The IS is on spax krypton shocks with some custom springs I had made up, I managed to get the arch to tyre gap the same on the front and rear. It's actually a few mm higher than that, photoshopped it a bit lower winkeye
charlE30
E30 Zone Addict
E30 Zone Addict
Posts: 3818
Joined: Mon Jan 10, 2005 11:00 pm
Location: Warwick

Post Sat Feb 07, 2009 9:19 pm

I remember seeing an actual photo of your car in another thread and it is spot on :cool:
BMW E30 344i track car :banana:
BMW F31 335d xdrive
Baz666
E30 Zone Addict
E30 Zone Addict
Posts: 3516
Joined: Fri Feb 29, 2008 11:00 pm
Location: Ipswich, Suffolk

Post Sat Feb 07, 2009 11:50 pm

hi dan how close are you now to finishing it fella, work you have done so far it looking good.
Image
E46 328ci, sport bumpers, 19" style 95`s
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Sun Feb 08, 2009 10:29 pm

Baz666 wrote:hi dan how close are you now to finishing it fella, work you have done so far it looking good.
As of today, one more plate to go in Baz. Just the passenger footwell to sort out :D

After that it's time for the MOT, then off to the bodyshop.
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Tue Feb 17, 2009 8:03 pm

Welding finished! Thanks to my Dad and brother the welding marathon is finally over.

Got the O/S sill and footwell done.

Image
Image
Image
What came out of the footwell
Image
Image
What went in
Image
Image
Image

I'll put it on it's wheels tomorrow, it's been on axle stands since october! More pics tomorrow.
d6dph
Married to the E30 Zone
Married to the E30 Zone
Posts: 12435
Joined: Sun Aug 14, 2005 11:00 pm
Location: Tiptree. Essex

Post Tue Feb 17, 2009 8:25 pm

Did you ask your brother if he wants to do my car for a crate of beer and a packet of malteasers Dan? :snigger:

Looking great so far, I'm sure the final result will be awesome. You have a great eye for detail going by the IS.
Image
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Wed Feb 18, 2009 5:22 pm

d6dph wrote:Did you ask your brother if he wants to do my car for a crate of beer and a packet of malteasers Dan? :snigger:

Looking great so far, I'm sure the final result will be awesome. You have a great eye for detail going by the IS.
I did have a word with my brother, he just glared at me and said 'I hate f***in E30's!'. He did have alot of trouble welding the touring up in places. So I wouldn't hold your breath chap. I'll see what he says in a few weeks once he's forgotten about welding BM's :mad:

Cheers for the compliment. You kindly call it 'eye for detail', my parents call it 'faffing around' :roll:
MartC
E30 Zone Newbie
E30 Zone Newbie
Posts: 94
Joined: Wed May 14, 2008 11:00 pm
Location: Hemel Hempstead

Post Wed Feb 18, 2009 9:30 pm

Dan325iSport wrote:I did have a word with my brother, he just glared at me and said 'I hate f***in E30's!'. He did have alot of trouble welding the touring up in places.
:chuckle: not just me that gets frustrated welding the thing up then.

Still, some good progress on the touring there mate. Might be doing one of those sill jacking points myself an you've just helped me out with a picture of whats inside :thumb:
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Thu Feb 19, 2009 9:52 am

At long last it's on its wheels, only been on axle stands since october :mad:

I ran a clay bar over it in preparation for the bodyshop and because it had the left overs of grinding all over it. I went through two clay bars!

Anyway, here's the pics and bear in mind there isn't any polish or wax on it.

Image
Image
Image
Image
Image
Image
Image
Eddie25
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Fri Dec 29, 2006 11:00 pm
Location: Gloucestershire

Post Thu Feb 19, 2009 6:14 pm

:cool: :cool: Looks spot on mate.
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Mon Mar 09, 2009 3:07 pm

I saw these borbet's and had to have them.

It's just waiting to go into the bodyshop then the goodies I've got stashed can go on.

I'm not overly happy with the stance if I'm honest (hottuning 60/40 kit) so I'll be ordering a new setup or making my own coilovers once the cars back from being painted. I ideally want it a bit lower at the rear.

Image
Image
Image
Image
And the daily steed.....
Image
Last edited by Dan320is on Fri Mar 20, 2009 4:43 pm, edited 1 time in total.
Jon_Bmw
Dangerous when thinking
Dangerous when thinking
Posts: 7604
Joined: Tue Jan 11, 2005 11:00 pm
Location: Salisbury

Post Mon Mar 09, 2009 3:23 pm

Looks like standard hieght at the rear? 8O
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Mon Mar 09, 2009 3:24 pm

Wheels look ace, very nice. Agree with the need to lower it a bit more at the rear :) :cool:
Current Fleet:

E30 335i Turbo M3 Convertible Replica
SUMPCRACKER
E30 Zone Addict
E30 Zone Addict
Posts: 2040
Joined: Sat Dec 13, 2008 11:00 pm
Location: Milton Keynes

Post Mon Mar 09, 2009 3:27 pm

Im jelous.
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Mon Mar 09, 2009 3:29 pm

Jon_Bmw wrote:Looks like standard hieght at the rear? 8O
I know, the kit is meant to be 60/40 :mad:
Last edited by Dan320is on Fri Mar 20, 2009 4:44 pm, edited 1 time in total.
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Mon Mar 09, 2009 3:30 pm

ImysE30 wrote:Wheels look ace, very nice. Agree with the need to lower it a bit more at the rear :) :cool:
I know you'd like the deep-dish look!
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Mon Mar 09, 2009 3:33 pm

Dan325iSport wrote:
ImysE30 wrote:Wheels look ace, very nice. Agree with the need to lower it a bit more at the rear :) :cool:
I know you'd like the deep-dish look!
:D

Can't wait to my Kerscher's on, just waiting on some new bolts :cool:
Current Fleet:

E30 335i Turbo M3 Convertible Replica
User avatar
georob
E30 Zone Camper
E30 Zone Camper
Posts: 1106
Joined: Thu Feb 03, 2005 11:00 pm
Location: Aberdeenshire

Post Mon Mar 09, 2009 3:40 pm

Suspension should settle down a bit with use though? Or have you been using it?
E34 x 1 - V8 + lots of CF
E30 x 2 - Tourings (1 x M50, 1 x M40)
RS6 C5 - Stage 1 remap - 500bhp

George
Baz666
E30 Zone Addict
E30 Zone Addict
Posts: 3516
Joined: Fri Feb 29, 2008 11:00 pm
Location: Ipswich, Suffolk

Post Mon Mar 09, 2009 4:45 pm

lookin Dan....but which one you going to bring to the next meet :?: :?:
Image
E46 328ci, sport bumpers, 19" style 95`s
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Mon Mar 09, 2009 7:23 pm

georob wrote:Suspension should settle down a bit with use though? Or have you been using it?
I've done about 120 miles and a track day.
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Mon Mar 09, 2009 7:24 pm

Baz666 wrote:lookin Dan....but which one you going to bring to the next meet :?: :?:
Choices.....I don't know. The IS is going into the bodyshop as soon as the touring is done :D
initial_g
E30 Zone Moderator
E30 Zone Moderator
Posts: 975
Joined: Fri Oct 24, 2008 11:00 pm
Location: derby

Post Mon Mar 09, 2009 8:01 pm

wheels are sick!!!!! i need them!.... were do you live he he :D
User avatar
mabz
E30 Zone Squatter
E30 Zone Squatter
Posts: 1583
Joined: Sat May 24, 2008 11:00 pm
Location: cambridgeshire

Post Mon Mar 09, 2009 9:03 pm

the work that youve done looks amazing.i live in cambridge and may need some welding doing at some point when i get mine back on the road!would your brother be interested :) it would be good to meet up around cambridge in the summer there seems to be a few e30 lovers around this way and a little meet would be sweet,i saw a thread long time ago there was a meet in milton tesco dont know any of the guys but would be good to meet and take some pics for the album!love the dished wheels on your whitey :cool:
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Mon Mar 09, 2009 11:19 pm

get some tools and general shite in the boot and it'll be fine :D

do you have the thicker spring pads on there maybe? it does look a little high :?
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Tue Mar 10, 2009 4:35 pm

mabz wrote:the work that youve done looks amazing.i live in cambridge and may need some welding doing at some point when i get mine back on the road!would your brother be interested :) it would be good to meet up around cambridge in the summer there seems to be a few e30 lovers around this way and a little meet would be sweet,i saw a thread long time ago there was a meet in milton tesco dont know any of the guys but would be good to meet and take some pics for the album!love the dished wheels on your whitey :cool:
A local meet would be awesome, they are plenty of us in the area. I remember that meet in milton, I was there with my old touring.

My bro' is sick of welding up rusty e30's for me, I'll give it some time before I ask him again :mad: