89 SPORT RESTO [OH MY GOD]

Show off your pride and joy here

Moderator: martauto

User avatar
Nogaro325
E30 Zone Regular
E30 Zone Regular
Posts: 461
Joined: Sat Jun 14, 2008 11:00 pm

Post Mon Feb 02, 2009 9:55 pm

My dolphin grey 325 sport has been at the bodyshop since Oct 2008,at last the project has started these pics where sent today the 2nd of Feb 2009 i nearly dropped down dead :D
I am sure you guys will know the bits that you are looking at from the pics.
Guys how bad is it,should i scrap it or save it.
I could really do with some help regarding parts if i decided to save her.
Any advice welcome as i know a few of you guys have been where i am now.
Been quoted £1300 in parts alone from Bmw.
£170 for rear valance.
£120 for the front.
£165 for new wings.
£170 for inner and outer rear arches.
cant recall what they wanted for new jacking points and the reinforceing bits.
New sills.
Would like to save money where i can ie second hand wings.
Really gutted not sure what to do :cry:

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Last edited by Nogaro325 on Mon Feb 02, 2009 10:10 pm, edited 1 time in total.
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Mon Feb 02, 2009 10:00 pm

wheres the pics
Image
Considering Selling the Cabby, looks like its gonna go
User avatar
Nogaro325
E30 Zone Regular
E30 Zone Regular
Posts: 461
Joined: Sat Jun 14, 2008 11:00 pm

Post Mon Feb 02, 2009 10:12 pm

:cry: :cry: :cry:
User avatar
Nogaro325
E30 Zone Regular
E30 Zone Regular
Posts: 461
Joined: Sat Jun 14, 2008 11:00 pm

Post Mon Feb 02, 2009 10:13 pm

What will i get for it scrap value these days :D
bmw1066
E30 Zone Newbie
E30 Zone Newbie
Posts: 233
Joined: Sat Jan 15, 2005 11:00 pm
Location: West Sussex

Post Mon Feb 02, 2009 10:18 pm

Anthing under the bumpers can be patched easey, ok it's not as good a full repear but if sealed well it wont be a problom, wing's can be got sh, the wheel arches can be got cheeper. I would just plate it and seal and wax oil, if it can't be seen what's it matter, Some people may not like the sound off that but I not a snob, plate and seal repears are good if dun well.

TBO it don't look that bad. Body shop shound's like thay don't wont to get involved?
Last edited by bmw1066 on Mon Feb 02, 2009 10:19 pm, edited 1 time in total.
Mark
BMW E23 735 1982 RESTO
BMW E34 V8 1994 SPORT KIT
BMW E30 320I TRACK AND RESTO TOY
RANGE ROVER CLASSIC
JEEP

Spelling and Gramer alway's very bag
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Mon Feb 02, 2009 10:18 pm

Oh the joys of tech 2 body kits! :(
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9535
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Post Mon Feb 02, 2009 10:20 pm

fook,i thought my old 320i had rot!

proof tech-2 kits murder E30's :(
Last edited by leeparkes on Mon Feb 02, 2009 10:21 pm, edited 1 time in total.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Mon Feb 02, 2009 10:21 pm

bmw1066 wrote:Anthing under the bumpers can be patched easey, ok it's not as good a full repear but if sealed well it wont be a problom, wing's can be got sh, the wheel arches can be got cheeper. I would just plate it and seal and wax oil, if it can't be seen what's it matter, Some people may not like the sound off that but I not a snob, plate and seal repears are good if dun well.

TBO it don't look that bad. Body shop shound's like thay don't wont to get involved?
From another thread...
bss325i wrote:
B7 wrote:No point in cutting corners if your serious about saving an e30.
+1!

This goes for ALL areas of E30 restoration, i cant stress how important this is!
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Mon Feb 02, 2009 10:21 pm

leeparkes wrote:fook**One day I'll learn how to use the space bar**i thought my old 320i had rot!

proof tech-2 kits murder E30's :(
If not maintained properly.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
User avatar
Nogaro325
E30 Zone Regular
E30 Zone Regular
Posts: 461
Joined: Sat Jun 14, 2008 11:00 pm

Post Mon Feb 02, 2009 10:24 pm

I would like to do it right first time with all gen BMW parts but the cost is just to much :cry: .
I suppose i already owe money to the bodyshop for labour stripping the car,best thing to do is scrap me thinks :cry:
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9535
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Post Mon Feb 02, 2009 10:25 pm

where are you located?
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
bmw1066
E30 Zone Newbie
E30 Zone Newbie
Posts: 233
Joined: Sat Jan 15, 2005 11:00 pm
Location: West Sussex

Post Mon Feb 02, 2009 10:26 pm

Looking at the pic's why do you need new seal's? from the pic's don't look to bad?

Resto's arnt cheep, and should never be dun to make ££ as it will be a sh*t job likley. Thay should be dun for what you get a nice sorted car, get it sorted slow and stedy there is not a rush. sorce sh part's were you can and new were you can't.
Mark
BMW E23 735 1982 RESTO
BMW E34 V8 1994 SPORT KIT
BMW E30 320I TRACK AND RESTO TOY
RANGE ROVER CLASSIC
JEEP

Spelling and Gramer alway's very bag
The_Diddler
Love it up the more door !
Posts: 3619
Joined: Tue May 27, 2008 11:00 pm
Location: Tamworth, Staffs Lovely!!!!!!

Post Mon Feb 02, 2009 10:26 pm

Wow some serious work and money required there :cry: :cry:

Unless your really serious about saving that particular E30 i'd be very tempted to remove all the tasty morsels sell them on and weigh the rest in...........

I reckon you'll need to spend 10K to make that look like a car you could buy right now for 5-6K.
User avatar
Nogaro325
E30 Zone Regular
E30 Zone Regular
Posts: 461
Joined: Sat Jun 14, 2008 11:00 pm

Post Mon Feb 02, 2009 10:28 pm

Its a shame really this i 1 looked after sport only 2 owners from new with nearly full dealer service history and every bill mot etc from new,so it just goes to show,used everyday or trailer queen the old tin worm still gets in :cry:
bmw1066
E30 Zone Newbie
E30 Zone Newbie
Posts: 233
Joined: Sat Jan 15, 2005 11:00 pm
Location: West Sussex

Post Mon Feb 02, 2009 10:29 pm

Nogaro325 wrote:I would like to do it right first time with all gen BMW parts but the cost is just to much :cry: .
I suppose i already owe money to the bodyshop for labour stripping the car,best thing to do is scrap me thinks :cry:
To be a proper job don't need to be gen parts!!! do it cheeper and have the car wax oiled. it will then be a usable e30. But if you feel scrap then that would be a shame.
Mark
BMW E23 735 1982 RESTO
BMW E34 V8 1994 SPORT KIT
BMW E30 320I TRACK AND RESTO TOY
RANGE ROVER CLASSIC
JEEP

Spelling and Gramer alway's very bag
bmwe30mtech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5288
Joined: Thu Feb 03, 2005 11:00 pm

Post Mon Feb 02, 2009 10:33 pm

Your Sport can be saved if you want to put in the time and money.

This is my dolphin sport resto project.

http://www.e30zone.net/modules.php?name ... 06&start=0

Skip to page 6 onwards to see the bodywork done.

Your rot is a fair bit worse that mine was, but if your replacing whole panels it doesnt really matter how rotten they are.
1988 M3 EvoII, Macau Blue/EvoII trim
1989 325i Sport M Tech II, Diamond Black/Black leather
User avatar
Nogaro325
E30 Zone Regular
E30 Zone Regular
Posts: 461
Joined: Sat Jun 14, 2008 11:00 pm

Post Mon Feb 02, 2009 10:39 pm

How much did it cost you for all your panals,i got a quote of £1100 for everthing still need a quote for nuts bolts washers etc but thats gen bmw bits.
How long from start to finish on your project.
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Mon Feb 02, 2009 10:42 pm

option 1) there's nothing whatsoever wrong with second-hand panels, if they are rust free. there are plenty of E30s being scrapped and quite often are fairly rust-free examples. a good bodywork man can weld in and prepare and paint to a perfectly acceptable standard for very reasonable cost. how fussy do you want to be?
spend what you are happy to spend to get it to your required standard and you will be very glad that you did, from the first time it's back on the road.

option 2) the value of scrap metal has decreased, so i'll give you £20 more than the scrappies! winkeye

p.s. what's your location?
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Mon Feb 02, 2009 10:43 pm

Check your sunroof tray as well.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
User avatar
Nogaro325
E30 Zone Regular
E30 Zone Regular
Posts: 461
Joined: Sat Jun 14, 2008 11:00 pm

Post Mon Feb 02, 2009 10:46 pm

sunroof tray is fine,he did say there was a bit in the bat tray but it can be saved,asked bmw today but they dont do a replacement.
User avatar
Nogaro325
E30 Zone Regular
E30 Zone Regular
Posts: 461
Joined: Sat Jun 14, 2008 11:00 pm

Post Mon Feb 02, 2009 10:47 pm

Will sleep on it and give a few numbers a ring from the Bm mags and see what i can come up with :D
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Mon Feb 02, 2009 10:53 pm

leeparkes wrote:where are you located?
+1
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Mon Feb 02, 2009 10:56 pm

Nogaro325 wrote:sunroof tray is fine,he did say there was a bit in the bat tray but it can be saved,asked bmw today but they dont do a replacement.
Do you mean the boot battery tray or the one in the bay?
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
User avatar
brettski
E30 Zone Camper
E30 Zone Camper
Posts: 1046
Joined: Mon Jan 10, 2005 11:00 pm
Location: stafford

Post Tue Feb 03, 2009 7:26 pm

get on www.chriswarburton.co.uk he might have some wings and other panels that you might need.
initial_g
E30 Zone Moderator
E30 Zone Moderator
Posts: 975
Joined: Fri Oct 24, 2008 11:00 pm
Location: derby

Post Tue Feb 03, 2009 8:13 pm

few tips m8

* buy second hand unrusty wings 9/10 times they fit better than replacment new weather there genuine bmw or copys

*DO NOT use second hand quarter panel/rear arch, its not worth the hastle ( from experiance being a panel beater/painter)

mine was rotton dont ther rear were the battery would sit when repaired ask them to drill a small drainage hole to stop it happening in the future

when u get ur wings weather new or second hand brush sealer on the rear of the arch part of the wing (will make them last pretty much forever

and when you get the car back get a can of spray wax (WORTH) do this and open ur doors then pray like mad all inside the doors and in the rear quarter panels use as much as you can the more the better, this will provide good anti corrosion protection

hope this helps
graham
Jim78
E30 Zone Regular
E30 Zone Regular
Posts: 550
Joined: Tue Jul 08, 2008 11:00 pm
Location: Mirfield, West Yorkshire.

Post Tue Feb 03, 2009 9:14 pm

bss325i wrote:
Nogaro325 wrote:sunroof tray is fine,he did say there was a bit in the bat tray but it can be saved,asked bmw today but they dont do a replacement.
Do you mean the boot battery tray or the one in the bay?
It's the one that Batman has his tea on in front of the bat telly.
Image
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Tue Feb 03, 2009 9:43 pm

:teehee:
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Tue Feb 03, 2009 9:54 pm

Well it's certainly frilly thats for sure.

The thing with 2nd hand panels is that they take longer to prep up. It's very rare a 2nd hand panel is perfectly straight. 99% of the time, they have a pin dent here, scratch there, a scab under there etc. So what you end up saving on a purchase price is swallowed in additional labour for prep.

I've not seen a genuine BMW panel yet that don't fit. Pattern panels are fine for rear arch repairs but front wings really need to be genuine.

Looking at your car I reckon they've not yet discovered the worst of it. Wheres the photos of the front inner wings under the washer bottle, the photos of the inner arches from the boot, Scuttle etc.? thers bound to be more when they really did deep.

Thought about a reshell? You'd reshell that with a good shell for under a grand.
B7's Motto. "If it's French, BURN IT!!!!!!"
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Tue Feb 03, 2009 10:04 pm

B7 wrote:Thought about a reshell? You'd reshell that with a good shell for under a grand.
As long as the donor shell doesn't need paint.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Tue Feb 03, 2009 10:22 pm

bss325i wrote:
B7 wrote:Thought about a reshell? You'd reshell that with a good shell for under a grand.
As long as the donor shell doesn't need paint.
You'd need to find a nice one (like your 2 door) and have to live with maybe a colour that wasn't you're first choice.

I was thinking Josh's 316 auto. You could do a lot worse. Okay the tech 2 kit would need to be painted but at least it's a solid base. Bare in mind hes been qouted 1300 quid for panels alone from BMW. This is going to escalate beyond control without a doubt.

£695 the solid 316 + what? 500 quid to paint the kit? Swap it all over and okay, it's no longer a genuine sport but then how many had sport on the log books????? Okay so it's over a grand but it would build a very solid 325i sport lookalike with no issues.
Last edited by B7 on Tue Feb 03, 2009 10:27 pm, edited 1 time in total.
B7's Motto. "If it's French, BURN IT!!!!!!"
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Tue Feb 03, 2009 10:26 pm

B7 wrote:
bss325i wrote:
B7 wrote:Thought about a reshell? You'd reshell that with a good shell for under a grand.
As long as the donor shell doesn't need paint.
You'd need to find a nice one (like your 2 door) and have to live with maybe a colour that wasn't you're first choice.

I was thinking Josh's 316 auto. You could do a lot worse. Okay the tech 2 kit would need to be painted but at least it's a solid base.
Yes that would be more cost effective but the problem is, it wont have a sport id unless you do a scuttlectemy and keep the colour correct.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Tue Feb 03, 2009 10:27 pm

Sorry I was editing mine as you were typing.
B7's Motto. "If it's French, BURN IT!!!!!!"
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Tue Feb 03, 2009 10:40 pm

B7 wrote:Swap it all over and okay, it's no longer a genuine sport but then how many had sport on the log books?????
Dealer print out will reveal all and half the value!
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
User avatar
Nogaro325
E30 Zone Regular
E30 Zone Regular
Posts: 461
Joined: Sat Jun 14, 2008 11:00 pm

Post Tue Feb 03, 2009 10:41 pm

Quick update,the rest of the car is solid no more rust aside from whats in the pics,i have looked plus she has had the once over for mot.
Would never dream of a reshell anyway thats really asking for trouble :D
I had a chat with the guy today,she does not need the front valance as its only a small hole.
Dont need inner and outer arches,as he says he can get repair arche kits.
Need the jacking points and sills and rear valance.
The car will need the whole front end resprayed so as to blend in the paints.
Looking at £1000 to do the work plus what ever the parts cost. :cry:
Rang round loads of breakers today and not 1 had a set of second hand wings. :cry: :cry:
I am in two minds at what to do at the min ,cut my losses and scrape her or carry but take a bit of time to collect the bits i need and hope the guy is not in a rush. :cool:
initial_g
E30 Zone Moderator
E30 Zone Moderator
Posts: 975
Joined: Fri Oct 24, 2008 11:00 pm
Location: derby

Post Tue Feb 03, 2009 10:44 pm

i know for a fact there are a pair local to me in derby