I'm getting a 325i cab tomorrow that i might be breaking. It is morsel laden.The_Diddler wrote:It was probably too good to use as a donor car, but thinking about all the lovely morsels i could use for my project got the better of meAlex wrote:my step dad was thinking about buying that car![]()
84 320i Moredoor Resto Project (Updated 01/02/09)
Moderator: martauto
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
-
Alex
- Married to the E30 Zone

- Posts: 22665
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
yer far too good for a donor
i hope you are putting some BBS on it too, ive got a lovely set of 14"s here
i hope you are putting some BBS on it too, ive got a lovely set of 14"s here
-
Alex
- Married to the E30 Zone

- Posts: 22665
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
shame on youbss325i wrote:I'm getting a 325i cab tomorrow that i might be breaking. It is morsel laden.The_Diddler wrote:It was probably too good to use as a donor car, but thinking about all the lovely morsels i could use for my project got the better of meAlex wrote:my step dad was thinking about buying that car![]()
what morsels has it got????
-
The_Diddler
- Love it up the more door !
- Posts: 3619
- Joined: Tue May 27, 2008 11:00 pm
- Location: Tamworth, Staffs Lovely!!!!!!
Tell me, tell me, whats up for grabsbss325i wrote:I'm getting a 325i cab tomorrow that i might be breaking. It is morsel laden.The_Diddler wrote:It was probably too good to use as a donor car, but thinking about all the lovely morsels i could use for my project got the better of meAlex wrote:my step dad was thinking about buying that car![]()
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
The standard 325i stuff +Alex wrote:shame on youbss325i wrote:I'm getting a 325i cab tomorrow that i might be breaking. It is morsel laden.The_Diddler wrote: It was probably too good to use as a donor car, but thinking about all the lovely morsels i could use for my project got the better of me![]()
![]()
what morsels has it got????![]()
Factory A/C
Heated black sport leather with rear head rests
cruise
15"BBS
tech1 steering wheel
headlamp wash wipe
80's car phone!
13 button OBC
maybe a 3.73 LSD
switchable auto box.
Propper option meister!
-
The_Diddler
- Love it up the more door !
- Posts: 3619
- Joined: Tue May 27, 2008 11:00 pm
- Location: Tamworth, Staffs Lovely!!!!!!
Ticks all the boxes!!!!!!!

-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Does that engine bay really need paint?
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
bss325i wrote: I'm getting a 325i cab tomorrow that i might be breaking. It is morsel laden.
The standard 325i stuff +
Factory climate A/C SOLD
Heated blue sport leather with rear head rests
cruise SOLD
5x 15"BBS with 4 caps and 4 good tyres
tech1 steering wheel
headlamp wash wipe
80's car phone!![]()
13 button OBC
3.73 LSD PROV SOLD
switchable auto box.
Heated door mirrors/door lock/washer jets.
Good unskimed 885 M20B25 head.
Propper option meister!
Sorry for the spam.
Pm me if you need anything Diddler (sorry cant remember your name.)
-
maxfield
- Old Skooler

- Posts: 15185
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield
There was no way that needed restoring!

-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Kinel Barry, you will be putting prices up next 
-
The_Diddler
- Love it up the more door !
- Posts: 3619
- Joined: Tue May 27, 2008 11:00 pm
- Location: Tamworth, Staffs Lovely!!!!!!
As i want to get the whole car painted and the engine is coming out anyway i'd thought i may as well plus the front panel item 1 in attached drawing is quite rusty all over and would be more cost effective to change than repair.DanThe wrote:Does that engine bay really need paint?
Then everything can be nice and shiny

-
The_Diddler
- Love it up the more door !
- Posts: 3619
- Joined: Tue May 27, 2008 11:00 pm
- Location: Tamworth, Staffs Lovely!!!!!!
I suppose restoring maybe be a bit strong, maybe light restoration would be better suitedmaxfield wrote:There was no way that needed restoring!
I have always wanted to do something like this with a car, the E30 is so easy to work on, its just nuts and bolts at the end of the day what could possibly go wrong anyway
The shell is in fantastic condition considering its nearly 25 years old, only 2 months away!!!, a 4 door 320i auto was never gever going to be a E30 classic icon, so i thought hey why not have some fun with this car!!!!!
When its finished from the outside it would look just as it should, a little lower than the average 320, 15" BBS wheels would be in keeping with the appearance, but under the bonnet, something a little special would be lurking
-
kdevitt
- E30 Zone Regular

- Posts: 591
- Joined: Sun Feb 05, 2006 11:00 pm
- Location: Dublin
This is slightly concerning - if I get my 323i up to the standard of your car, before work was started, I'd be a happy man 
-
The_Diddler
- Love it up the more door !
- Posts: 3619
- Joined: Tue May 27, 2008 11:00 pm
- Location: Tamworth, Staffs Lovely!!!!!!
You should see it todaykdevitt wrote:This is slightly concerning - if I get my 323i up to the standard of your car, before work was started, I'd be a happy man
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Good plan to just change the front panel, I wouldnt worry about getting the loom out though, just unclip the engine bay part back and let it hang down into the trans tunnel area with the fuse box
Heres a pic of my old 1984 Henna Red 2 door

Heres a pic of my old 1984 Henna Red 2 door

-
The_Diddler
- Love it up the more door !
- Posts: 3619
- Joined: Tue May 27, 2008 11:00 pm
- Location: Tamworth, Staffs Lovely!!!!!!
Yeah think thats the best idea with the loom dan, don't really need to remove it, i'm sure that the fusebox and engine bay loom can be covered up for the re-paint.
Lovely looking old chromie as well
, what happened to it?
Lovely looking old chromie as well
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
If i was pulling the dash out (like you have) and was having the engine bay painted then i would just pull the loom out.
Its not that bigger deal.
Its not that bigger deal.
-
The_Diddler
- Love it up the more door !
- Posts: 3619
- Joined: Tue May 27, 2008 11:00 pm
- Location: Tamworth, Staffs Lovely!!!!!!
Well a little more done today, but really the purpose of the post was to show slighty better pictures in daylight







Drivers side footwell

Passenger side footwell

Around Fusebox/wiring loom

Rear offside wheelarch, where fuel expansion tank should be

Rear nearside wheel arch from boot

Rear offside wheel arch from boot

Behind nearside front wing

Little plate needed here

And here too

Apart from the rear panel where a tow bar was fitted, around the rear arch lips, front panel, and bottom of the wheelarch adjacent to the jacking points(littlr metal squares) not much in the way of new tin required, happy days!!!!
Next job, get the lump and box out, should be fun never done that before.







Drivers side footwell

Passenger side footwell

Around Fusebox/wiring loom

Rear offside wheelarch, where fuel expansion tank should be

Rear nearside wheel arch from boot

Rear offside wheel arch from boot

Behind nearside front wing

Little plate needed here

And here too

Apart from the rear panel where a tow bar was fitted, around the rear arch lips, front panel, and bottom of the wheelarch adjacent to the jacking points(littlr metal squares) not much in the way of new tin required, happy days!!!!
Next job, get the lump and box out, should be fun never done that before.
-
The_Diddler
- Love it up the more door !
- Posts: 3619
- Joined: Tue May 27, 2008 11:00 pm
- Location: Tamworth, Staffs Lovely!!!!!!
I did think about that, but i was'nt sure if the stick on covers that protect the loom down the sides of the car were still available form the dealers, see pic below.bss325i wrote:If i was pulling the dash out (like you have) and was having the engine bay painted then i would just pull the loom out.
Its not that bigger deal.

Can you see it running from front to back, had a look at removing but the only way would be to destroy it to get it off??
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
Not all E30's have the stick on covers.The_Diddler wrote:I did think about that, but i was'nt sure if the stick on covers that protect the loom down the sides of the car were still available form the dealers, see pic below.bss325i wrote:If i was pulling the dash out (like you have) and was having the engine bay painted then i would just pull the loom out.
Its not that bigger deal.
Can you see it running from front to back, had a look at removing but the only way would be to destroy it to get it off??
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
You should pull those off anyway and spray a load of waxoil in the sills 
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
They can be removed ok with care.
-
hennabm
- Old Skooler

- Posts: 1395
- Joined: Sun Jul 08, 2007 11:00 pm
- Location: Edinburgh
Looks well for 25yrs young but time now will save trouble in the future.
I'm just disappointed you are being tempted down the modding route rather than keeping the poor beast a std car
. At least it will still be Henna
I'm in the process of saving for my trip down the resto road. Looking at things I think it will be approx 3yrs time. I want to go the whole hog and give it a bath at the Surface Preparation compnay and then start afresh from that.
For this year it will get a new cam belt, water pump and viscous fan.
I'm in the process of saving for my trip down the resto road. Looking at things I think it will be approx 3yrs time. I want to go the whole hog and give it a bath at the Surface Preparation compnay and then start afresh from that.
For this year it will get a new cam belt, water pump and viscous fan.
'82 323i henna
'90 320iSE sterling silver No more!
'10 116d Sport Red - MkI
'12 1.4 Punto Easy Exotica Red
'11 X3 3.0d SE
'89 240 DL Estate
'90 320iSE sterling silver No more!
'10 116d Sport Red - MkI
'12 1.4 Punto Easy Exotica Red
'11 X3 3.0d SE
'89 240 DL Estate
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Wheres the fun in a 320 auto though,,,, its almost as bad as ratch telling me to keep the M10 flint in my 316 
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
Restoration?!!!hennabm wrote:Looks well for 25yrs young but time now will save trouble in the future.I'm just disappointed you are being tempted down the modding route rather than keeping the poor beast a std car
. At least it will still be Henna
![]()
I'm in the process of saving for my trip down the resto road. Looking at things I think it will be approx 3yrs time. I want to go the whole hog and give it a bath at the Surface Preparation compnay and then start afresh from that.![]()
For this year it will get a new cam belt, water pump and viscous fan.
Your car is concours!
-
aceraf
- E30 Zone Addict

- Posts: 3005
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Derby
**LPG E39 Spares or Repairs for Sale**

Breaking 325i Touring

Breaking 325i Touring
-
rebelcruiser
- E30 Zone Regular

- Posts: 715
- Joined: Wed Dec 28, 2005 11:00 pm
- Location: Ely cambs
thats very clean 
-
e30topless
- E30 Zone Team Member

- Posts: 13595
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
nice clean shell for 25 years young can't wait to see the finished piccys 
-
The_Diddler
- Love it up the more door !
- Posts: 3619
- Joined: Tue May 27, 2008 11:00 pm
- Location: Tamworth, Staffs Lovely!!!!!!
Maybe if it was an manual i'd keep it standard, but i just can't live with the 2 litre/auto combination, i'm just glad the shells in such good condition that i have at least got a few options engine wise, whatever i finally do it will remain as stock looking as possible.hennabm wrote:Looks well for 25yrs young but time now will save trouble in the future.I'm just disappointed you are being tempted down the modding route rather than keeping the poor beast a std car
. At least it will still be Henna
![]()
I'm in the process of saving for my trip down the resto road. Looking at things I think it will be approx 3yrs time. I want to go the whole hog and give it a bath at the Surface Preparation compnay and then start afresh from that.![]()
For this year it will get a new cam belt, water pump and viscous fan.
Anything i do externally could easily be removed and returned to stock if required.
As for your's needing any kind of restoration...................
-
The_Diddler
- Love it up the more door !
- Posts: 3619
- Joined: Tue May 27, 2008 11:00 pm
- Location: Tamworth, Staffs Lovely!!!!!!
Thanks guys for all the comments, your advice is much appreciated 
-
kdevitt
- E30 Zone Regular

- Posts: 591
- Joined: Sun Feb 05, 2006 11:00 pm
- Location: Dublin
Love seeing updates on such a similar car to my own! I personally think the engine upgrade is a good idea - these cars really need to be driven, and I know I'd soon lose desire to drive a car I found a bit too tame, especially with the M3 in the driveway too!!
Keep up the good work
Keep up the good work
-
Geeman
- Married to the E30 Zone

- Posts: 7641
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Grimsby, Lincolnshire
Wow!
I can't get over how spankingly clean that is. It's really amazing. Did it live most of it's life in a cocoon or something?
Again... wow!
I can't get over how spankingly clean that is. It's really amazing. Did it live most of it's life in a cocoon or something?
Again... wow!
-
The_Diddler
- Love it up the more door !
- Posts: 3619
- Joined: Tue May 27, 2008 11:00 pm
- Location: Tamworth, Staffs Lovely!!!!!!
Well not much to report, pace has slowed down dramatically now as i'm waiting my turn for the bodyshop.
Next job on the list will be to remove the engine and box, then throughly degrease the engine bay and underneath, can't wait to get underneath with the white spirit and toothbrush..........
Next job on the list will be to remove the engine and box, then throughly degrease the engine bay and underneath, can't wait to get underneath with the white spirit and toothbrush..........
-
e30topless
- E30 Zone Team Member

- Posts: 13595
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
any progress on this ? or did you get side tracked with the new more door ? 
-
Eddie25
- E30 Zone Newbie

- Posts: 37
- Joined: Fri Dec 29, 2006 11:00 pm
- Location: Gloucestershire
How did I miss this thread?! Henna red Chromie FTW!
It wasn't available on face lifts was it? If so it's a shame as it's a stuning colour.
Reminds me a bit of that colour RS1600i's came in (Que BSS325) as i can't remember the name. Although it's nowhere near as orange.
It wasn't available on face lifts was it? If so it's a shame as it's a stuning colour.
Reminds me a bit of that colour RS1600i's came in (Que BSS325) as i can't remember the name. Although it's nowhere near as orange.

