Any one in wiltshire area?

[rix313]

Just wondering if there any people in and around wiltshire who meet up etc

[Jon_Bmw]

Salisbury, usually travel about along the south coast as not a huge amount happens in Wiltshire. Where abouts are you based? There is a meet in Oxford tomorrow if you are interested?

[rix313]

I'm Nr Westbury.

Car is in bits in the garage at the moment would be abit out of place in my clio lol

[ShepsEvo3]

I work in Wiltshire, live in Bristol.

Would be up for any meets with some notice

[case]

I'm in Warminster, just signed up for the big southern meet. Looks good.

[roley]

i am in wiltshire most weekends but live in bristol would be up for any meets . Cheddar must be coming up soon

[kingcruizer]

im in wiltshire to. m4 j17. meets aroud here would be good.

[Jesus325iTouring]

Oi be in Wiltshire too you!

Chippenham,usually to be seen in a multi coloured blue,multi dented R5,but when I can,in the Touring.

Clive,hows the Cab project coming along? Is it Mega Squirted yet?

[Jimos]

I live and work in salisbury, wilts. I am going to the southern meet in Portsmouth.

[rix313]

Ah right more than I firsth thought.

How would you guys fancy a rolling road day in March? I have one lined up for another club but need more people if any ones interested?

It's £40 (maybe some pence) inc vat, 2 runs, a print out and what ever lunch they provide, sandwiches on a plate or something.

Send me a PM if interested

[Jesus325iTouring]

Mines only recently been on the rollers and nothings changed,but depending on where your holding it I might well still pop along to say hello.

[Jon_Bmw]

Which rolling road? I would want to put my 205 back on the same rollers after I change the cam, which means sheps'.

[rix313]

It's in Westbury. It's the people who're providing me with all my ECU and Loom for my project.

Got a few people coming with varying cars could be interesting

[ShepsEvo3]

Which rolling road? I would want to put my 205 back on the same rollers after I change the cam, which means sheps'.

I am guessing its the one at M-Tech... its a Dyno Dynamics.

You are welcome to come to me again Jon anytime for a comparison run.

I've never had much luck with dyno days from the zone... don't know why, but we have had plenty from other clubs

[Jon_Bmw]

I've sent a cam over to Aus for a regrind on Friday , so I doubt i'll see it for a couple of weeks. And then it will probably take me about a month to get round to fitting it

But it will most certainly be coming back to you to check it all over(AFR's) and see what it does. Expecting about 180bhp, well hoping

[Jesus325iTouring]

I've sent a cam over to Aus for a regrind on Friday , so I doubt i'll see it for a couple of weeks. And then it will probably take me about a month to get round to fitting it

But it will most certainly be coming back to you to check it all over(AFR's) and see what it does. Expecting about 180bhp, well hoping

Aus? As in Australia? Am I being a tw at?

[rix313]

Which rolling road? I would want to put my 205 back on the same rollers after I change the cam, which means sheps'.

I am guessing its the one at M-Tech... its a Dyno Dynamics.

You are welcome to come to me again Jon anytime for a comparison run.

I've never had much luck with dyno days from the zone... don't know why, but we have had plenty from other clubs

Yeah thats them

Not having much luck getting any one to spend any sort of money lol! Got a good price on a private track day at combe but no one was interested only needed 15 people.

Any ways, any one is welcome to pop along. I wont be running the bmw as it has no engine :/ lol

[Jon_Bmw]

I've sent a cam over to Aus for a regrind on Friday , so I doubt i'll see it for a couple of weeks. And then it will probably take me about a month to get round to fitting it

But it will most certainly be coming back to you to check it all over(AFR's) and see what it does. Expecting about 180bhp, well hoping

Aus? As in Australia? Am I being a tw at?

Yep, there is someone who does a good regrind and a chip to suit for £100 in sterling, Thats pretty unbeatable. It will eventually have to go on custom management and throttle bodies, but thats when I can afford it!

[Jesus325iTouring]

I've sent a cam over to Aus for a regrind on Friday , so I doubt i'll see it for a couple of weeks. And then it will probably take me about a month to get round to fitting it

But it will most certainly be coming back to you to check it all over(AFR's) and see what it does. Expecting about 180bhp, well hoping

Aus? As in Australia? Am I being a tw at?

Yep, there is someone who does a good regrind and a chip to suit for £100 in sterling, Thats pretty unbeatable. It will eventually have to go on custom management and throttle bodies, but thats when I can afford it!

Smashing job then,nice to see you care for the enviroment

[kingcruizer]

Clive,hows the Cab project coming along? Is it Mega Squirted yet?

hello mate hows tricks? yes is the answer and its bloody mental. its down at ants having a few tweeks at the mo but i should be getting it back real soon. (i hope). ive still got that tourer if your after any bits.

[Jesus325iTouring]

Clive,hows the Cab project coming along? Is it Mega Squirted yet?

hello mate hows tricks? yes is the answer and its bloody mental. its down at ants having a few tweeks at the mo but i should be getting it back real soon. (i hope). ive still got that tourer if your after any bits.

Hey Clive,good to hear the Cab is souped up,love to see it sometime,i've heard of good things about M/S be good to actually see what it's all about
Still after some bits,but right at the mo work is slow and i'm skint,the Tourings got to wait But hey ho,it still goes allright though

[kingcruizer]

Clive,hows the Cab project coming along? Is it Mega Squirted yet?

hello mate hows tricks? yes is the answer and its bloody mental. its down at ants having a few tweeks at the mo but i should be getting it back real soon. (i hope). ive still got that tourer if your after any bits.

Hey Clive,good to hear the Cab is souped up,love to see it sometime,i've heard of good things about M/S be good to actually see what it's all about
Still after some bits,but right at the mo work is slow and i'm skint,the Tourings got to wait But hey ho,it still goes allright though

come and help yourself mate. its going to the scrappy soon any way. anything to help. pm me if you wanna pop over. if the cabs back i'll take you out for a spin.

[Jesus325iTouring]

PM'd Clive

[rix313]

Any one fancy running their car on the rollers then ?

[steerfromtherear]

There is a 5forum/bmwowner meet at bulford parade ground on the 15th of march if anyone is interested?
Nr Salisbury for those that dont know it already.
http://www.bmwowner.com/forum/viewtopic ... 4&t=151043

More the merrier I say.

[Jesus325iTouring]

There is a 5forum/bmwowner meet at bulford parade ground on the 15th of march if anyone is interested?
Nr Salisbury for those that dont know it already.
http://www.bmwowner.com/forum/viewtopic ... 4&t=151043

More the merrier I say.

I think I might pop along to this,I know the parade area,I learnt how to do reverse donuts in an Astra and power slides in an SD1 on that very parade ground

Question is do I come via a rally drive across the Plains or nice and sensible down the main roads

[Jesus325iTouring]

Jon & John,BMW & L335 respectively are you going to come along?

[Jon_Bmw]

I'll probably pop along. I can't view that thread, so can you remind me closer to the time SFTR.

[Jesus325iTouring]

12pm ish

Bulford Parade Ground.

15th March

Fancy a blat over the Plains? Jesus RWD (maybe R5 style!) style or Mi style

[Jesus325iTouring]

Pasted from the 5Forum......

Bullford meet

15th March 2009 meet up before (possibly around 12ish) going to the local pub for a carvary lunch/soft drinks

there is a location and postcode on page 2 (cheers hippy999)

so exactly where and what time is this meet,im def up for it already got my name down

Meet is usually held at the parade ground in Bulford!

It is located on Bulford Droveway, keying "SP4 9" into google maps should find it!

EDIT - I have now attached a aerial view from google maps!

[Jon_Bmw]

Mi16 doesn't do offroading. Its bumpy and crashy on a normal a road.

I'll probably piss about in the iS rocket ship.

[steerfromtherear]

Right new thread up, got a reasonable amount of people coming I think. Check it out please.
http://www.e30zone.net/modules.php?name ... 08#1394708

[HairyScreech]

ah hah, rumbled, im from just down the road from you in warminster.
i know the rolling road your talking about, m-tech automotive. there opposite my current part time workplace.

[rix313]

Any one wanting to stick their car on the rollers this saturday (14th)

£40 for 2 runs, print out, lunch.
pm me