what chips can i get for the tech1 ?
Moderator: martauto
looking at getting one of my spare ecus chipped at some point in the future what choices can i get for it and who on here can supply them ?
-
Ziggy
- E30 Zone Team Member
- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
Ant does (/did) them... Depending on the spec of the car it's going into, I've got a ready-chipped 073 ECU going spare, with a slightly different chip from his 'off the shelf' ones. 
E30 in need of wiring loom smoke since April '11...
spoke to him a while ago he dosent do a chip for the tech1magpie wrote:speedtouch.
pm sentZiggy wrote:Ant does (/did) them... Depending on the spec of the car it's going into, I've got a ready-chipped 073 ECU going spare, with a slightly different chip from his 'off the shelf' ones.
or an ISjbh wrote:spoke to him a while ago he dosent do a chip for the tech1magpie wrote:speedtouch.
got that from evolve 
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Ant
- Retired Team Member
- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
- Contact:
I do chips fr the following
M40B18 , 157 and 387 ECU's
M20B20 172/381/2 ECUs
M20 B25 073 ECU( chromies)
M20B25 173/380
M20B23 (motronic conversion required)
M20B27- all variations
M20B28- cammed or otherwise, 4 variations
M42B18 175 ECU Two software versions of the three
M30B35 179 ECU
All are in house units developed over the last 7 years or so.
Thats that clarified
M40B18 , 157 and 387 ECU's
M20B20 172/381/2 ECUs
M20 B25 073 ECU( chromies)
M20B25 173/380
M20B23 (motronic conversion required)
M20B27- all variations
M20B28- cammed or otherwise, 4 variations
M42B18 175 ECU Two software versions of the three
M30B35 179 ECU
All are in house units developed over the last 7 years or so.
Thats that clarified
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies Email FTW
Original performance chips, original works not unlicensed copies
Email FTW
-
Ant
- Retired Team Member
- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
- Contact:
all are £65 inc delivery, all deliver an increase over stock 073 setup and high CR motor really chips well ! max 6.5K limiter though due to the flywheel TDC pin not liking higher rpms
some 073s are 24 pin socket so need an extra 4 pins added, no drilling required though as the PCB has the required holes, happy to modifiy if and when required.
073 setup and high CR motor really chips well ! max 6.5K limiter though due to the flywheel TDC pin not liking higher rpms some 073s are 24 pin socket so need an extra 4 pins added, no drilling required though as the PCB has the required holes, happy to modifiy if and when required.
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies Email FTW
Original performance chips, original works not unlicensed copies
Email FTW