my e30's * update m50 projects begining

Show off your pride and joy here

Moderator: martauto

User avatar
hoshy
E30 Zone Wiki Guru
E30 Zone Wiki Guru
Posts: 4118
Joined: Tue Jan 18, 2005 11:00 pm
Location: Munich

Post Fri Jan 02, 2009 5:30 pm

Very interested in the brake work going on mate. Would you be interested in helping me to write up your work for the brake upgrades page on the wiki?

Hope the shed thing gets resolved.
E46 M3 CSL but dreaming of another E30.
gcs325i
E30 Zone Regular
E30 Zone Regular
Posts: 693
Joined: Fri Jul 14, 2006 11:00 pm
Location: dundee

Post Fri Jan 02, 2009 7:04 pm

hoshy wrote:Very interested in the brake work going on mate. Would you be interested in helping me to write up your work for the brake upgrades page on the wiki?

Hope the shed thing gets resolved.
Hoshy, no bother I'll take a proper camera with me and detail the work over the weekend so they should be finished by the end of next week.

Shed wise there has been a truce called :) and I've moved out of the front of the shed and now using the larger 3 section store at the back the one with the ramp in the photo. But need to buy tools to stock it so am on the look out for a decent mig welder and compressor (100l+) if any one can recommend any thing. Just got a disco with no axles to move tonight and i should have some space to work with. :thumb:
User avatar
hoshy
E30 Zone Wiki Guru
E30 Zone Wiki Guru
Posts: 4118
Joined: Tue Jan 18, 2005 11:00 pm
Location: Munich

Post Fri Jan 02, 2009 7:31 pm

gcs325i wrote:
hoshy wrote:Very interested in the brake work going on mate. Would you be interested in helping me to write up your work for the brake upgrades page on the wiki?

Hope the shed thing gets resolved.
Hoshy, no bother I'll take a proper camera with me and detail the work over the weekend so they should be finished by the end of next week.

Shed wise there has been a truce called :) and I've moved out of the front of the shed and now using the larger 3 section store at the back the one with the ramp in the photo. But need to buy tools to stock it so am on the look out for a decent mig welder and compressor (100l+) if any one can recommend any thing. Just got a disco with no axles to move tonight and i should have some space to work with. :thumb:
Cool. Let me know when you've got the photos and I'll give you my mail address. I'll draft up an article and you can edit it.

Would be good to include dimensions/drawings for all the machining and fabrication too if that's available?
E46 M3 CSL but dreaming of another E30.
shedrool83
Old Skooler
Old Skooler
Posts: 4395
Joined: Thu May 10, 2007 11:00 pm
Location: Dundee Scotland

Post Fri Jan 02, 2009 8:07 pm

gcs325i wrote: Just got a disco with no axles to move tonight and i should have some space to work with. :thumb:

Drop me a text if you need a hand mate.
Image
User avatar
gepetto
E30 Zone Newbie
E30 Zone Newbie
Posts: 109
Joined: Tue Nov 29, 2005 11:00 pm
Location: scotland

Post Sat Jan 10, 2009 6:53 pm

just reading up on your thread gary, good work!! been thinking on bigger brakes myself. like jake said if you need a hand, gives a shout. ill keep an ear out for compressers etc, usualy scot ads is good for a bargain. keep up the good work mate.
gcs325i
E30 Zone Regular
E30 Zone Regular
Posts: 693
Joined: Fri Jul 14, 2006 11:00 pm
Location: dundee

Post Tue Jan 13, 2009 11:33 pm

gepetto wrote:just reading up on your thread gary, good work!! been thinking on bigger brakes myself. like jake said if you need a hand, gives a shout. ill keep an ear out for compressers etc, usualy scot ads is good for a bargain. keep up the good work mate.
Cheers mate, I've kind of ground to a halt at the moment, but just dropped the disks off to be machined today so hopefully they get done soon, machinist has a busted hand :eek: . Should have them finished off and fitted by the end of the month :D
gcs325i
E30 Zone Regular
E30 Zone Regular
Posts: 693
Joined: Fri Jul 14, 2006 11:00 pm
Location: dundee

Post Tue Feb 24, 2009 6:10 pm

Finished my front brake set-up finally so here's some shots

Image

Image

Image

Just needs spacers and wheels to finish.

back disk fitted looking for a suitable 2 or 4 pot for the rear as there loads of room for something more powerful back there and just plumb in a brake balancer in to the system.
BadDave
E30 Zone Team Member
E30 Zone Team Member
Posts: 6012
Joined: Sun Jan 09, 2005 11:00 pm
Location: Nr Aberdeen.Scotland(Gods country)

Post Tue Feb 24, 2009 8:29 pm

Looking good Gary.
When are you getting them fitted and when do you fancy testing them winkeye
Alpina B10 3.2L #187 (1 of 64 brought into the UK)
2.8L turbo build thread(work in progress)
http://www.e30zone.net/modules.php?name ... 27#1268227
gcs325i
E30 Zone Regular
E30 Zone Regular
Posts: 693
Joined: Fri Jul 14, 2006 11:00 pm
Location: dundee

Post Tue Feb 24, 2009 8:47 pm

I'll hopefully have them fitted within the next few weeks, might need to pop up and borrow a wheel though
BadDave
E30 Zone Team Member
E30 Zone Team Member
Posts: 6012
Joined: Sun Jan 09, 2005 11:00 pm
Location: Nr Aberdeen.Scotland(Gods country)

Post Tue Feb 24, 2009 9:00 pm

No problem mate. Just let me know when you need it.
Alpina B10 3.2L #187 (1 of 64 brought into the UK)
2.8L turbo build thread(work in progress)
http://www.e30zone.net/modules.php?name ... 27#1268227
gcs325i
E30 Zone Regular
E30 Zone Regular
Posts: 693
Joined: Fri Jul 14, 2006 11:00 pm
Location: dundee

Post Sat May 02, 2009 4:31 pm

Decided a change was in order so did this after work last week.

Donor car ready for the engine pull
Image

Car its going it
Image

engine out

Image

Lightened flywheel next to stock

Image

Image

Fly wheel fitted

Image


Clutch and gearbox back on.

Image

All in all not a bad nights work.

Had it ready for the mot yesterday but an near oil fire on the way for it scuppered things, the new Farm oil filter threads failed just after leaving my work shop and oil hit the manifold :eek: . Any hotter and it would have lit but luckily I managed to pull over before any damage was done, so it is all go for Monday for the MOT. The car filled with smoke so some Ace Ventura styled head out side window driving was called for :D . Got to be said that it is a rather quick beast now, running a 320 box and diff and it pulls rather well and the flywheel has made a good affect on the engine response.
User avatar
hoshy
E30 Zone Wiki Guru
E30 Zone Wiki Guru
Posts: 4118
Joined: Tue Jan 18, 2005 11:00 pm
Location: Munich

Post Tue May 05, 2009 1:49 am

Is it just me or have the pics stopped working in this thread?
E46 M3 CSL but dreaming of another E30.
gcs325i
E30 Zone Regular
E30 Zone Regular
Posts: 693
Joined: Fri Jul 14, 2006 11:00 pm
Location: dundee

Post Tue May 05, 2009 1:55 am

Dunno seem to be working for me, are they all not working or just the newer ones
gcs325i
E30 Zone Regular
E30 Zone Regular
Posts: 693
Joined: Fri Jul 14, 2006 11:00 pm
Location: dundee

Post Tue Jul 07, 2009 12:54 am

Wee update - brakes fitted and tested at various speeds :D

Image

brakes are rather efficient at speed and the pedal is quite progressive and not just on/off, the m3 master cylinder keeps the pedal from being too long as well, it's probably still shorter than standard.

the car as it stands now

Image

new tyres on the way in the form of TOYO T1R PROXES 215/40/16 ordered today so no more balloons on the front and planning on getting the slipper, disc brake back end and adjustable rear beam sorted by the weekend, still on the shakedown stage at the moment but it seems to be a lot better with the 215/40/16's over the 195/50/15's i was previously running.

Also fitted my h&r arb's and bilstein shocks at the weekend so all in it handles a lot better and the m5 shifter i fitted has taken care of the long throw of my standard shift.
m4xos
E30 Zone Addict
E30 Zone Addict
Posts: 2410
Joined: Mon Jan 28, 2008 11:00 pm
Location: Bournemouth

Post Tue Jul 07, 2009 12:59 pm

ive got a lovely mtech 2 kit in the exact colour for your car if your interested!?
Nay
Channel Island Crew
Channel Island Crew
Posts: 3988
Joined: Wed Aug 13, 2008 11:00 pm

Post Tue Jul 07, 2009 1:27 pm

Nice work fella!

Seems like your cars getting there!
Image

Uni is killing the project.
gcs325i
E30 Zone Regular
E30 Zone Regular
Posts: 693
Joined: Fri Jul 14, 2006 11:00 pm
Location: dundee

Post Tue Jul 07, 2009 7:29 pm

m4xos - would depend on how much you could get it to my door for as i have an unpainted one lying here needing paint and a bit of fettling?

NayC - getting there, away to start the search for more power now i have the suspension and brakes sorted.
blitz877
AKA ajm-e30
Posts: 1761
Joined: Sun Oct 23, 2005 11:00 pm
Location: in a galaxy far, far away

Post Wed Jul 08, 2009 11:01 am

what calipers are those mate?
Image
gcs325i
E30 Zone Regular
E30 Zone Regular
Posts: 693
Joined: Fri Jul 14, 2006 11:00 pm
Location: dundee

Post Wed Jul 08, 2009 7:35 pm

blitz877 - RX7 calipers and g60 vw discs

Just bought a set of e30m3 rear calipers to finish my z1 disc's rear brake conversion :D
Last edited by gcs325i on Sun Sep 13, 2009 10:01 pm, edited 1 time in total.
blitz877
AKA ajm-e30
Posts: 1761
Joined: Sun Oct 23, 2005 11:00 pm
Location: in a galaxy far, far away

Post Fri Jul 24, 2009 11:26 am

how much are a set of those brackets mate?
Image
gcs325i
E30 Zone Regular
E30 Zone Regular
Posts: 693
Joined: Fri Jul 14, 2006 11:00 pm
Location: dundee

Post Sun Sep 13, 2009 10:25 pm

Thought I'd update this thread, the lachs car has been scrapped due to rust issues, Pic of me in the car working in safe conditions as usual :D

Image

The bronzit car is getting a m50b25 motor fitted in a months time, looking to do it to a budget of £500,

Image

wee spec list and cost predictions

525i doner - 100
m20 lighten fliywheel + new clutch -100
e36 mounts - 20
porche 944 servo - 35
plus budgeting 200 for ramdom stuff that'll be needed
m52 manifold - bought a year or 2 ago can't remember how much? say £50
14" Spal fan £30


free stuff
m40 box
m20b20 prop
m20b20 linkage
m20 starter
rad
suspension, lsd, brake upgrades already completed on the current car.

Plus try make some money back on ramdom parts of the 525i.

Anything missing off this list?
gcs325i
E30 Zone Regular
E30 Zone Regular
Posts: 693
Joined: Fri Jul 14, 2006 11:00 pm
Location: dundee

Post Wed Dec 09, 2009 1:24 pm

Now got the engine out of the donor and am ready to start a wee refresh before fitting involving -

sump gasket
rocker gasket
plugs and filters
m20 lightened flywheel
nearly new clutch and pressure plate
m40 box
m52 manifolds (exhaust) +gaskets
going to do the vanos seals and gasket
fit new converted loom
fit e36 engine mount arms
e28 m5 rubber mounts

This project will be completed along side Jake's (shedrool83) M30 conversion at my shed so will have the cars finished side by side for comparisons. Also going to get the cars weighed before and after to see how the weight differences compare.
User avatar
bumpygt
E30 Zone Newbie
E30 Zone Newbie
Posts: 236
Joined: Sat Nov 15, 2008 11:00 pm
Location: poole dorset

Post Wed Dec 09, 2009 10:21 pm

how much did you lighten your flywhel by?
gcs325i
E30 Zone Regular
E30 Zone Regular
Posts: 693
Joined: Fri Jul 14, 2006 11:00 pm
Location: dundee

Post Wed Dec 09, 2009 10:34 pm

I think it was taken to just under 6kg.
E30BeemerLad
Married to the E30 Zone
Married to the E30 Zone
Posts: 16806
Joined: Mon Mar 28, 2005 11:00 pm
Location: Norfolk

Post Thu Dec 10, 2009 9:00 pm

I'd seriously get an E36 rack on there and make the exhaust manifold fit around it. One thing I was truly disappointed with on my car was realising how slow the E30 rack is
gcs325i
E30 Zone Regular
E30 Zone Regular
Posts: 693
Joined: Fri Jul 14, 2006 11:00 pm
Location: dundee

Post Thu Dec 10, 2009 9:13 pm

E30BeemerLad wrote:I'd seriously get an E36 rack on there and make the exhaust manifold fit around it. One thing I was truly disappointed with on my car was realising how slow the E30 rack is
Cheers Lee, I have been on the look out for an e46 sport rack but will be firing in a e36 one in if one doesn't appear for decent money. Got one of Dan's steering linkage's on order as well so hopefully it'll be easy enough to get the down pipes sorted.
e301988325i
E30 Zone Addict
E30 Zone Addict
Posts: 3701
Joined: Fri Feb 01, 2008 11:00 pm
Location: Taunton, Somerset

Post Fri Dec 11, 2009 4:50 pm

ebay item number 320449602878 these quick racks aren't going for peanuts now.
I said:

Can anyone suggest how to test if the boot lights are staying on with the boot shut?

e30topless said:

lock the wife in there
gcs325i
E30 Zone Regular
E30 Zone Regular
Posts: 693
Joined: Fri Jul 14, 2006 11:00 pm
Location: dundee

Post Sat Apr 10, 2010 11:42 am

Thought I'd update this, engine in just needs a bit more work, repositioning the pas bottle and wire in the ews, till it fire's up then on with the exhaust.

Image

Image

Image