tech 1 resto finished

Show off your pride and joy here

Moderator: martauto

gaszman
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 3111
Joined: Wed Jan 03, 2007 11:00 pm
Location: Outside of Scummerland !

Post Sat Nov 29, 2008 9:02 am

hello im not going to wobble on how im gonna have the best car ect when im finished so dont panic a nice car in 1 colour with shiney bits is all im after.
im starting with this
Image

i think its a nice car to start with needs an engine rebuild and will do this my self. i have allready removed the head and will be removing the engine in the next two weeks i have a friend to over see all my mistakes and rectify them he he he .

ok so what do i need to do ok it has a hole in the boot and the rear wheen arches need welding but i would like to get her running first
i will take pics if people wont but i just thought that as there are lots of resto threds i wont . this will be my first major attack in a long time so i hope all goes well at least i have you lot on here to point me in the right direction commects all welcome and advice too l cheers for making this year great and to all those who i have met and spoken to .
here goes into the breach dear friends wish me luck?
Last edited by gaszman on Mon Apr 27, 2009 7:20 pm, edited 4 times in total.
Image
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Nov 29, 2008 11:00 am

Good luck with the project,be warned,once you get started it is difficult to know where to draw the line. You think, whilst I am under here with this in bits I may as well do this as well winkeye .....
Youth is wasted on the young.
E30BeemerLad
Married to the E30 Zone
Married to the E30 Zone
Posts: 16806
Joined: Mon Mar 28, 2005 11:00 pm
Location: Norfolk

Post Sat Nov 29, 2008 11:49 am

daimlerman wrote:Good luck with the project,be warned,once you get started it is difficult to know where to draw the line. You think, whilst I am under here with this in bits I may as well do this as well winkeye .....
never more a true word was spoken :)
gaszman
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 3111
Joined: Wed Jan 03, 2007 11:00 pm
Location: Outside of Scummerland !

Post Sat Nov 29, 2008 1:22 pm

yes i am aware of this pit im climbing in . the motor is sound on avarage just needs looking after. i will hope i know where to draw the line i have all the bits i need to get here running nd then i will stop maybe
Image
User avatar
CourtM3
E30 Zone Newbie
E30 Zone Newbie
Posts: 53
Joined: Thu Jan 13, 2005 11:00 pm

Post Sat Nov 29, 2008 2:05 pm

If I had that car, just to get it running properly would be enough for me.
Alpina99
E30 Zone Camper
E30 Zone Camper
Posts: 1000
Joined: Sat Nov 17, 2007 11:00 pm
Location: Portsmouth

Post Sat Nov 29, 2008 8:04 pm

Good luck with the project, look forward to seeing it finished
:D :D
Gone, but not forgotten !!
schnaarf
E30 Zone Camper
E30 Zone Camper
Posts: 1076
Joined: Sun Jun 24, 2007 11:00 pm

Post Sat Nov 29, 2008 9:53 pm

Nice car that. Find out what that knocking was?
gaszman
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 3111
Joined: Wed Jan 03, 2007 11:00 pm
Location: Outside of Scummerland !

Post Sun Nov 30, 2008 8:39 am

big ends shot engine out :cry:
Image
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Sun Nov 30, 2008 9:03 am

:eek: tech2 boot spoiler?! tech1 top of my shopping list mate :wink: it's going to be nice dave, well worth it when done. looks like we're going to be sharing a few weekends between yours and mine between now and early spring. roll on that first nice spring southern meet! :)
gaszman
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 3111
Joined: Wed Jan 03, 2007 11:00 pm
Location: Outside of Scummerland !

Post Sun Nov 30, 2008 9:06 am

yes i have got a nice picture of all the southern boys with there e30 lots of diffrent models should be a nice display such as sherbourn sweet
Image
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Sun Nov 30, 2008 11:38 am

Looking forward to this one. Good luck and it'll be nice to see the original press tech one saved.
B7's Motto. "If it's French, BURN IT!!!!!!"
Bob_S
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5412
Joined: Sat Jun 11, 2005 11:00 pm
Location: chester, cheshire

Post Sun Nov 30, 2008 6:58 pm

I'd have it in the bodyshop while you build up a nice 2.7 to slot in it :) might aswell if your having the engine out and for the relative cost!

looks like a good project :)
Bollocks to this 24v scrap!
gaszman
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 3111
Joined: Wed Jan 03, 2007 11:00 pm
Location: Outside of Scummerland !

Post Thu Jan 01, 2009 2:38 pm

ok i have been busy 3 nuts on the prop then engine and box out found some nice bits have ben done all new front end bushes . track cntrl arms some welding has been done just these little bits that i found that i need to do . oh yes and rebuild the engine but i have help with that , i have removed some bits and cleaned and they came up ok .
ok we will start with rust none on the front end but some on the back

Image
Image
this is normal i was hoping this wasnt to bad but as this will not be seen so no hard ship
in the boot
Image
Image
the battery side has been done just a little where the bumper bolts on and a little hope in the opp side
and a tiny hole by the nos plate light
Image
all the bits removed inside the car
Image
Image
this is where i am just three bolts on the prop and shes out
and a couple of pics of things ive removed and cleaned
Image
gearbox cros member this was so coverd in crud just like the gearbox still looks nice now and easer to put back on the car when shes nice and clean oh yes
the the oil cooler
Image
so dont expect her to be concourse just a nice tech 1 sport we hope enjoy
Image
skipunda
E30 Zone Team Member
E30 Zone Team Member
Posts: 5672
Joined: Thu Sep 04, 2008 11:00 pm
Location: Cornwall/Plymouth

Post Thu Jan 01, 2009 2:43 pm

E30BeemerLad wrote:
daimlerman wrote:Good luck with the project,be warned,once you get started it is difficult to know where to draw the line. You think, whilst I am under here with this in bits I may as well do this as well winkeye .....
never more a true word was spoken :)
Yep, and I have'nt even put pics up of mine yet. i've been f'ing around cleaning this and replacing that! Best of luck, will be awesome
gaszman
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 3111
Joined: Wed Jan 03, 2007 11:00 pm
Location: Outside of Scummerland !

Post Thu Jan 01, 2009 2:46 pm

cheers i hope she will be nice and tidy not looking for perfection with no budget it will be hard , have to sell the tourer to get her painted
Image
spook
League two here we come !!!
Posts: 7583
Joined: Sat Aug 19, 2006 11:00 pm
Location: portsmouth

Post Thu Jan 01, 2009 7:36 pm

Good project you have there Dave, if you need some sections you can pop round to mine and cut them from a spare car i have here. :cool:
Image
rebelcruiser
E30 Zone Regular
E30 Zone Regular
Posts: 715
Joined: Wed Dec 28, 2005 11:00 pm
Location: Ely cambs

Post Thu Jan 01, 2009 7:43 pm

looks a good project :cool:
gaszman
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 3111
Joined: Wed Jan 03, 2007 11:00 pm
Location: Outside of Scummerland !

Post Thu Jan 01, 2009 8:15 pm

cheers mate might ask adi to do that for me if you dont mind
Image
spook
League two here we come !!!
Posts: 7583
Joined: Sat Aug 19, 2006 11:00 pm
Location: portsmouth

Post Thu Jan 01, 2009 8:39 pm

No problem mate
Image
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Fri Jan 02, 2009 4:14 pm

dave, i think pre and post facelift rear panels differ slightly so today i went and cut out a complete rear corner (from the seam with the nearside rear quarter to the number plate recess) and a 10 inch long centre piece of rear valance for a repair panel for the offside. east-peesy repair mate with good-as-new metal :thumb: see you in her at the 1st feb pompey meet then winkeye
gaszman
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 3111
Joined: Wed Jan 03, 2007 11:00 pm
Location: Outside of Scummerland !

Post Mon Jan 12, 2009 8:58 pm

ok tried to take the engine out tonight but i think i have to remove all the dam bolts from the prop is this right as i have removed 3 but there are 6 on the flange that connects to the gear box any body . adi still on for sat have proper engine hoist so i might need so help sat if you ok keith is over to out sat rebuild mon tues in thurs fri running sun hers hoping :cry:
Image
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Mon Jan 12, 2009 9:22 pm

not sure really mate. have you got any "streaky back" in? oh and some whiskas biscuits for Scrumps? meeeowwoof! :wink: make sure bassboy turns up and we'll sort out them 'pinas. i'm hoping to have the new splitter and skirts back on the iS at some point, in time for the feb 1 meet. :thumb:
ricey46
E30 Zone Regular
E30 Zone Regular
Posts: 982
Joined: Fri Dec 02, 2005 11:00 pm
Location: Edinburgh

Post Tue Jan 13, 2009 3:42 pm

Geeze, where are all of these Lachs Tech 1 sports coming from!lol. there were hardly any a while ago, the more the merrier tho! :D Good luck with the project, as for the prop, remove the 3 that you can get spanners on to which sounds like what you've done, 3 hold the doughnut to the box and 3 hold the prop to the doughnut. Remember that there's a locating shaft that the prop sits onto so it will have to be pulled off of this, either remove the center bearing and drop down to shorten the prop and remove or if you are using a crane, lift the engine off of it's mounts and it should move forward.

HTH.
Paul.
325i sport Tech1
335i Chromie - Sold
2001 E46 M3-Sold
1999 E39 M5

Image
gaszman
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 3111
Joined: Wed Jan 03, 2007 11:00 pm
Location: Outside of Scummerland !

Post Tue Jan 13, 2009 7:38 pm

ricey46 cheers mateengine is now out let the rebuild begin
Image
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Wed Jan 14, 2009 1:02 am

what, you haven't started it yet??? :rolleyes:
jbh
Hartge Crew
Posts: 3963
Joined: Sat Aug 11, 2007 11:00 pm
Location: denny

Post Wed Jan 14, 2009 1:26 am

:woohoo: another tech1 being saved... cant wait till i can get stuck into mine will be happining real soon and ill be starting a thread aswell its always good to read that im not the only one doing it on a budget :wink:
gaszman
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 3111
Joined: Wed Jan 03, 2007 11:00 pm
Location: Outside of Scummerland !

Post Fri Jan 16, 2009 10:05 am

hi just a sad update removed the sump and big ends to have a look and well not good nos 2 3 5 6 all u/s so regrind £198 + shells on top. now on hold :(

do i continue or put another engine in or just stop
Image
User avatar
buzz6353
E30 Zone Regular
E30 Zone Regular
Posts: 274
Joined: Sat Mar 19, 2005 11:00 pm
Location: Stirling,Scotland

Post Fri Jan 16, 2009 10:30 am

check the post above your last one
gaszman
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 3111
Joined: Wed Jan 03, 2007 11:00 pm
Location: Outside of Scummerland !

Post Fri Jan 16, 2009 10:33 am

i have a 35i engine sat here face lift also have spare crank and bits will sleep on it and start again fresh sat am :mad:
Image
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Fri Jan 16, 2009 10:37 am

gaszman wrote:the the oil cooler
Image
Strange looking oil cooler! :?
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
gaszman
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 3111
Joined: Wed Jan 03, 2007 11:00 pm
Location: Outside of Scummerland !

Post Fri Jan 16, 2009 5:06 pm

i do know its not the oil cooler but it plugs into thid filter housing then ok :mad:
Image
jbh
Hartge Crew
Posts: 3963
Joined: Sat Aug 11, 2007 11:00 pm
Location: denny

Post Fri Jan 16, 2009 7:40 pm

gaszman wrote:hi just a sad update removed the sump and big ends to have a look and well not good nos 2 3 5 6 all u/s so regrind £198 + shells on top. now on hold :(

do i continue or put another engine in or just stop
could do you an engine supplied and delivered for around £280 ono if your interested let me know

James

07856001234
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Fri Jan 16, 2009 9:04 pm

i've got your driver's side rear wheel arch here mate (rust-free!) and my 325 lump bits and bobs, so will bring it all over sat morning. get the bread, bacon, teabags and biccies in! and the oil-rig workers overalls! :thumb:
gaszman
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 3111
Joined: Wed Jan 03, 2007 11:00 pm
Location: Outside of Scummerland !

Post Sat Jan 17, 2009 8:11 pm

ok update have now found and fitted mains and big end bearings and started putting it back together tonight will continue sun and mon hope to see you adi mon if you still up for it
Image
gaszman
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 3111
Joined: Wed Jan 03, 2007 11:00 pm
Location: Outside of Scummerland !

Post Sat Jan 24, 2009 8:44 am

ok have update engine ready for install and welding done on the reat pics
Image
this is the rear under the bumper looks ok i think
Image
and this the other side
will take pics of engine install later :cool:
Image