84 320i Moredoor Resto Project (Updated 01/02/09)

Show off your pride and joy here

Moderator: martauto

The_Diddler
Love it up the more door !
Posts: 3619
Joined: Tue May 27, 2008 11:00 pm
Location: Tamworth, Staffs Lovely!!!!!!

Post Sat Dec 27, 2008 5:33 pm

Well things have started now on the resto of my 84 320i 4 door auto.....

I've stripped quite a lot out now in preparation for the little bit of welding i need doing and the full respray i'm after which will include the engine bay and underneath :D :D

One things for sure the 2 litre lump and the auto box aren't going back in.......

The only question is what to put back in????

M50, 2.7 eta converation.....???, or something else, your input here would be most welcome :D :D

The aim of the project is to maintain appearances in keeping with the period of the car, i.e. colour, chrome, interior (just need some decent sports seats for re-trimming) etc, etc.

The only external differences i was thinking about were some 15" BBS wheels, and a custom stainless steel exhaust. Think i'll keep the 320i badge :twisted:

As of later tonight i should have secured a 90,000 mile 2 owner, F reg 325se 4 door for all the major parts, gearbox, clutch, prop, trailing arms, ABS brakes, 13 button OBC, body panels, engine for possible 2.7 conversion etc, etc, etc The cars actually quite nice, but unfortunately for the car it has all the parts i will be after :D, it even has a mint rear blind as well :D

I will no doubt needs lots of help and advice from all on here as the project goes on as i have never attempted anything like this before 8O, lucky i have a nice double garage to play in :D

Here are some before shots, followed by where i am as of this evening.

At Thorsby Hall car show in August this year
Image

When i bought in back in May this year, after a bit of buffing.....
Image

Image

Image

Image

Image

At Gaydon this year on E30 25th Aniversary Display
Image

Image

At Gaydon with 2 other Henna red chromies :D :D
Image

Well bang up to date now, here are some pictures of the project so far, pretty much all the interior out now, wiring loom tomorrow :cry: .

Engine ready to come out, so any zoners in the midlands with a spare engine crane i could borrow winkeye would be greatly appreciated...

Fuel tank and lines already removed, plus propshaft, rear brake lines removed as well.

Sorry for the quality of the pictures, taken in the garage tonight with the wifes camera phone, will post better pics up tomorrow.

Image

Image

Image

Image

Image

Look at these for 25 year old footwells............... :D :D

Drivers side

Image

Image

Passenger side

Image

I'll post up some pictures of the scuttle area, and rear arches, etc tomorrow.

Well thats where i'm at, any advice or suggestions would be most welcome, and i'll keep you all up to date on progress :P :P
Last edited by The_Diddler on Sun Feb 01, 2009 11:11 pm, edited 2 times in total.
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Sat Dec 27, 2008 5:41 pm

Looks like your making steady progress :D
Are you keeping it the original colour?
Image
Baz666
E30 Zone Addict
E30 Zone Addict
Posts: 3516
Joined: Fri Feb 29, 2008 11:00 pm
Location: Ipswich, Suffolk

Post Sat Dec 27, 2008 5:44 pm

must be fab to have a nice big double garage to work out off, cars coming on i see aswell :cool:
Image
E46 328ci, sport bumpers, 19" style 95`s
The_Diddler
Love it up the more door !
Posts: 3619
Joined: Tue May 27, 2008 11:00 pm
Location: Tamworth, Staffs Lovely!!!!!!

Post Sat Dec 27, 2008 5:45 pm

eko wrote:Looks like your making steady progress :D
Are you keeping it the original colour?
Yeah, Henna Red all the way :D
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Sat Dec 27, 2008 5:45 pm

Excelent stuff!

I would go with an M20 as it looks more at home in a car as original looking as yours.

Keep the pics coming, resto threads are one of my favorites.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
The_Diddler
Love it up the more door !
Posts: 3619
Joined: Tue May 27, 2008 11:00 pm
Location: Tamworth, Staffs Lovely!!!!!!

Post Sat Dec 27, 2008 5:45 pm

Baz666 wrote:must be fab to have a nice big double garage to work out off, cars coming on i see aswell :cool:
Its great, lots of space, if a little cold this time of year, but you soon get warmed up!!
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Sat Dec 27, 2008 5:47 pm

Good,good,Henna is a lovely colour when polished up :D
Id also say stick to the M20 although M50 under the bonnet of a chromie can still be acceptable winkeye
Image
The_Diddler
Love it up the more door !
Posts: 3619
Joined: Tue May 27, 2008 11:00 pm
Location: Tamworth, Staffs Lovely!!!!!!

Post Sat Dec 27, 2008 5:52 pm

I've got a donor 1988 325se manual more door coming shortly, so all i need for a nice 2.7 M20 would be a block form a 525e eta, is that right??
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Sat Dec 27, 2008 5:54 pm

The_Diddler wrote:I've got a donor 1988 325se manual more door coming shortly, so all i need for a nice 2.7 M20 would be a block form a 525e eta, is that right??
Think you can use the ETA block with a 2lt head but dont take my word for it as ive never done it :D
Image
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Sat Dec 27, 2008 5:55 pm

The_Diddler wrote:I've got a donor 1988 325se manual more door coming shortly, so all i need for a nice 2.7 M20 would be a block form a 525e eta, is that right??
You can use the 325i block and pistons and use the eta crank and rods.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Sat Dec 27, 2008 5:56 pm

Have a read through this for M20 2.7 builds.

http://www.e30zone.net/modules.php?name ... ic&t=89665
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Sat Dec 27, 2008 5:58 pm

eko wrote:
The_Diddler wrote:I've got a donor 1988 325se manual more door coming shortly, so all i need for a nice 2.7 M20 would be a block form a 525e eta, is that right??
Think you can use the ETA block with a 2lt head but dont take my word for it as ive never done it :D
Yes a B20 head can be put straight onto an eta 2.7 block ad it will work but the exhaust ports are smaller so not ideal.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
The_Diddler
Love it up the more door !
Posts: 3619
Joined: Tue May 27, 2008 11:00 pm
Location: Tamworth, Staffs Lovely!!!!!!

Post Sat Dec 27, 2008 5:59 pm

bss325i wrote:
The_Diddler wrote:I've got a donor 1988 325se manual more door coming shortly, so all i need for a nice 2.7 M20 would be a block form a 525e eta, is that right??
You can use the 325i block and pistons and use the eta crank and rods.
I take it there will be some specialist machine shop work required here to make everything fit/line up?
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Sat Dec 27, 2008 6:03 pm

The_Diddler wrote:
bss325i wrote:
The_Diddler wrote:I've got a donor 1988 325se manual more door coming shortly, so all i need for a nice 2.7 M20 would be a block form a 525e eta, is that right??
You can use the 325i block and pistons and use the eta crank and rods.
I take it there will be some specialist machine shop work required here to make everything fit/line up?
Yes the block has to have 3mm machined off it if a remember correctly.

In an ideal world genuine Alpina C2 2.7 pistons are best as you can still use the 135mm B25 rods and no machining of the block is needed.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Sat Dec 27, 2008 6:06 pm

M20B27 for sure in this case..

But.. Do it 'properly'
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
The_Diddler
Love it up the more door !
Posts: 3619
Joined: Tue May 27, 2008 11:00 pm
Location: Tamworth, Staffs Lovely!!!!!!

Post Sat Dec 27, 2008 6:06 pm

I bet a set of C2 2.7 pistons ain't cheap.............
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Sat Dec 27, 2008 6:09 pm

The_Diddler wrote:I bet a set of C2 2.7 pistons ain't cheap.............
Simon13 has some and a forged TD crank as used in a C2 2.7.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
The_Diddler
Love it up the more door !
Posts: 3619
Joined: Tue May 27, 2008 11:00 pm
Location: Tamworth, Staffs Lovely!!!!!!

Post Sat Dec 27, 2008 6:09 pm

bss325i wrote:Have a read through this for M20 2.7 builds.

http://www.e30zone.net/modules.php?name ... ic&t=89665
Great link, thanks
StuBeeDoo
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6756
Joined: Sat Feb 05, 2005 11:00 pm
Location: Up My Own Arse

Post Sat Dec 27, 2008 6:32 pm

Car of that nature needs to be as original as possible, so stick to an M20. :D
This is why I no longer drive an E30......

Image
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Sat Dec 27, 2008 6:33 pm

awsome i would go for 2.7 as it would keep it look original Ish

or how about a 2.3 323i winkeye

car looked in fab condition to start with, seen it at leeds earlier this year :D
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Sat Dec 27, 2008 6:43 pm

does it really need welding? As thats a clean as fook floor pan!
StuBeeDoo
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6756
Joined: Sat Feb 05, 2005 11:00 pm
Location: Up My Own Arse

Post Sat Dec 27, 2008 6:53 pm

Alex wrote:or how about a 2.3 323i winkeye
I have to admit, that was the first option that crossed my mind. Would be pretty much plug & play. Problem would be finding a good M20B23 though. :roll:
This is why I no longer drive an E30......

Image
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Sat Dec 27, 2008 6:54 pm

StuBeeDoo wrote:
Alex wrote:or how about a 2.3 323i winkeye
I have to admit, that was the first option that crossed my mind. Would be pretty much plug & play. Problem would be finding a good M20B23 though. :roll:
did you not have them bits winkeye

there is "i think" a 323i in a scrapyard near adit

i remember him saying in a post, had A/C, CC, tech 1 kit, sports seats the lot too
Last edited by Alex on Sat Dec 27, 2008 6:55 pm, edited 1 time in total.
The_Diddler
Love it up the more door !
Posts: 3619
Joined: Tue May 27, 2008 11:00 pm
Location: Tamworth, Staffs Lovely!!!!!!

Post Sat Dec 27, 2008 6:54 pm

Simon13 wrote:does it really need welding? As thats a clean as fook floor pan!
Only a little bit, front jacking points (around little square piece) and rear wheel arches just need lips sorting, apart from that i cant think of much esle that needs welding

Not bad for 25 years young hey...... :D :D
StuBeeDoo
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6756
Joined: Sat Feb 05, 2005 11:00 pm
Location: Up My Own Arse

Post Sat Dec 27, 2008 6:56 pm

Alex wrote:
StuBeeDoo wrote:
Alex wrote:or how about a 2.3 323i winkeye
I have to admit, that was the first option that crossed my mind. Would be pretty much plug & play. Problem would be finding a good M20B23 though. :roll:
did you not have them bits winkeye
Pistons were NFG and couldn't source any. That's why I ended-up buying Iain's M20B27.
This is why I no longer drive an E30......

Image
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Sat Dec 27, 2008 6:57 pm

StuBeeDoo wrote:
Alex wrote:
StuBeeDoo wrote: I have to admit, that was the first option that crossed my mind. Would be pretty much plug & play. Problem would be finding a good M20B23 though. :roll:
did you not have them bits winkeye
Pistons were NFG and couldn't source any. That's why I ended-up buying Iain's M20B27.
oh well has more uuummmffff winkeye
The_Diddler
Love it up the more door !
Posts: 3619
Joined: Tue May 27, 2008 11:00 pm
Location: Tamworth, Staffs Lovely!!!!!!

Post Sat Dec 27, 2008 7:00 pm

Well as i've just sorted the donor car(88 325se manual), pick it up next tuesday :D :D , a M20 2.7 it is then, maybe as bss325i suggested some Alpina C2 2.7 pistons in a 325 head along with perhaps a forged TD crank winkeye winkeye
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Sat Dec 27, 2008 7:03 pm

The_Diddler wrote:Well as i've just sorted the donor car(88 325se manual), pick it up next tuesday :D :D , a M20 2.7 it is then, maybe as bss325i suggested some Alpina C2 2.7 pistons in a 325 head along with perhaps a forged TD crank winkeye winkeye
This really is the best way to a 2.7.

No machining

Stronger crank

Long rods for better "revability"
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Sat Dec 27, 2008 7:04 pm

and more torque using the 2.5 rods
The_Diddler
Love it up the more door !
Posts: 3619
Joined: Tue May 27, 2008 11:00 pm
Location: Tamworth, Staffs Lovely!!!!!!

Post Sat Dec 27, 2008 7:06 pm

bss325i wrote:
The_Diddler wrote:I bet a set of C2 2.7 pistons ain't cheap.............
Simon13 has some and a forged TD crank as used in a C2 2.7.
Simon have just sent pm regarding above
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Sat Dec 27, 2008 7:26 pm

where abouts in midlands are you mate got a crane here
The_Diddler
Love it up the more door !
Posts: 3619
Joined: Tue May 27, 2008 11:00 pm
Location: Tamworth, Staffs Lovely!!!!!!

Post Sat Dec 27, 2008 7:33 pm

Well my donor car purchase has just gone ti*s up :x :x

Oh well i found the car on ebay last night on buy it now for £800.00, anywhooo i contacted the guy offered £700.00 with deposit to be paid straight into his bank account today if deal agreed.

We agreed price last night, i offered to to click on buy it now to finish auction, he prefered he sorted and chap said he would remove from ebay, well he didnt and somebody else clicked buy it now option :roll: :roll:

My fault really should have pushed harder, had already sorted train to pick up on tuesday as well....., when i rang earlier deal was still on too.

Never mind, car was probaly too good to use as donor anyway, see link below :cry: :cry: :cry:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0289779012

Will just have to console myself with buying other morsels instead in preparation :D :D :D
Last edited by The_Diddler on Sat Dec 27, 2008 7:41 pm, edited 1 time in total.
The_Diddler
Love it up the more door !
Posts: 3619
Joined: Tue May 27, 2008 11:00 pm
Location: Tamworth, Staffs Lovely!!!!!!

Post Sat Dec 27, 2008 7:34 pm

whipsey wrote:where abouts in midlands are you mate got a crane here
Hi Whipsey, i'm in Tamworth mate, just a quick trip down M6 and along A14
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Sat Dec 27, 2008 7:38 pm

my step dad was thinking about buying that car :(
The_Diddler
Love it up the more door !
Posts: 3619
Joined: Tue May 27, 2008 11:00 pm
Location: Tamworth, Staffs Lovely!!!!!!

Post Sat Dec 27, 2008 7:43 pm

Alex wrote:my step dad was thinking about buying that car :(
It was probably too good to use as a donor car, but thinking about all the lovely morsels i could use for my project got the better of me :twisted: :twisted: