Window cleaning
Moderator: martauto
-
poolnoodle
- E30 Zone Squatter

- Posts: 1785
- Joined: Sat May 24, 2008 11:00 pm
- Location: Hobart, Tasmania, Australia
Any tips or suggestions for a detailing novice as to the best way of cleaning window glass. I always seem to struggle to get a clean, smudge free result. The front window seems to be especially bad.
-
neamem
- E30 Zone Newbie

- Posts: 163
- Joined: Thu Nov 20, 2008 11:00 pm
- Location: Essex
autoglym glass polish and fast glass are good. also give them a claying on the outside before hand.
-
iDreamBeemer
- E30 Zone Camper

- Posts: 1177
- Joined: Mon Feb 14, 2005 11:00 pm
- Location: Camberley
newspaper and vinegar? Proper old skool technique.
-
hubble
- E30 Zone Addict

- Posts: 2006
- Joined: Thu Aug 17, 2006 11:00 pm
- Location: Valles Marineris
This method works a treat. But for best results use a clay bar & lube first to remove any bonded deposits on the glass first then follow with vinegar and a microfibre or newspaper. Don't forget the inside too.iDreamBeemer wrote:newspaper and vinegar? Proper old skool technique.

-
Alex
- Married to the E30 Zone

- Posts: 22665
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
clay bar the windows will have to give that a tryhubble wrote:This method works a treat. But for best results use a clay bar & lube first to remove any bonded deposits on the glass first then follow with vinegar and a microfibre or newspaper. Don't forget the inside too.iDreamBeemer wrote:newspaper and vinegar? Proper old skool technique.
-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
Claying the glass is a great help.
I use "Stoners invisible glass" and a waffle weave microfibre towel, Works really well.
A little tip for you, When doing glass do the inside up/down & outside left/right then if you get a smear you know which side it's one due to the direction the smear follows
I use "Stoners invisible glass" and a waffle weave microfibre towel, Works really well.
A little tip for you, When doing glass do the inside up/down & outside left/right then if you get a smear you know which side it's one due to the direction the smear follows

-
hubble
- E30 Zone Addict

- Posts: 2006
- Joined: Thu Aug 17, 2006 11:00 pm
- Location: Valles Marineris
Hmmm A very useful tip Dave!d6dph wrote:Claying the glass is a great help.
I use "Stoners invisible glass" and a waffle weave microfibre towel, Works really well.
A little tip for you, When doing glass do the inside up/down & outside left/right then if you get a smear you know which side it's one due to the direction the smear follows

-
Alex
- Married to the E30 Zone

- Posts: 22665
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
+1hubble wrote:Hmmm A very useful tip Dave!d6dph wrote:Claying the glass is a great help.
I use "Stoners invisible glass" and a waffle weave microfibre towel, Works really well.
A little tip for you, When doing glass do the inside up/down & outside left/right then if you get a smear you know which side it's one due to the direction the smear follows
-
OBs
- E30 Zone Squatter

- Posts: 1655
- Joined: Thu Nov 02, 2006 11:00 pm
- Location: Torbay, Devon
White vinegar I presume?
Malt stinks
Malt stinks
-
poolnoodle
- E30 Zone Squatter

- Posts: 1785
- Joined: Sat May 24, 2008 11:00 pm
- Location: Hobart, Tasmania, Australia
Thanks guys, never thought of the clay - makes sense with 25 years of accumuated sh1t.
What lubricant with clay?
What lubricant with clay?
-
hubble
- E30 Zone Addict

- Posts: 2006
- Joined: Thu Aug 17, 2006 11:00 pm
- Location: Valles Marineris
Depends really. Water with some or click on the following links for more info. I've found the Zymol kit to be very good, but not cheappoolnoodle wrote:Thanks guys, never thought of the clay - makes sense with 25 years of accumuated sh1t.
What lubricant with clay?
http://www.monzacarcare.com/products/?c ... rch%20term
http://www.cleanyourcar.co.uk/detailing-clay/cat_9.html
http://www.theultimatefinish.co.uk/Stor ... ductId=650

